{
 "name": "Errora error code dataset",
 "license": "https://creativecommons.org/licenses/by/4.0/",
 "updated": "2026-10-29",
 "publisher": "Errora",
 "url": "https://errora.com.tr/",
 "count": 425,
 "codes": [
  {
   "type": "obd2",
   "code": "P0011",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Intake Camshaft Position Timing (Bank 1) – Timing Over-Advanced or System Performance",
   "severity": "Medium",
   "causes": "Low or incorrect engine oil; Faulty variable valve timing (oil control) solenoid; Stretched timing chain/belt or incorrect timing",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check the engine oil level and condition; change it if needed; Inspect the wiring and connectors for damage, corrosion or looseness; Replace the faulty component with a quality part; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0011/"
  },
  {
   "type": "obd2",
   "code": "P0014",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Exhaust Camshaft Position Timing (Bank 1) – Timing Over-Advanced or System Performance",
   "severity": "Medium",
   "causes": "Low or incorrect engine oil; Faulty variable valve timing (oil control) solenoid; Stretched timing chain/belt or incorrect timing",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check the engine oil level and condition; change it if needed; Inspect the wiring and connectors for damage, corrosion or looseness; Replace the faulty component with a quality part; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0014/"
  },
  {
   "type": "obd2",
   "code": "P0016",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Crankshaft/Camshaft Position (Bank 1) – Correlation Error",
   "severity": "Medium",
   "causes": "Stretched timing chain/belt or incorrect timing; Faulty sensor or component; Faulty variable valve timing (oil control) solenoid; Low or incorrect engine oil",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check the engine oil level and condition; change it if needed; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0016/"
  },
  {
   "type": "obd2",
   "code": "P0087",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Fuel Rail/System Pressure – Pressure Too Low",
   "severity": "High",
   "causes": "Low fuel pressure (weak fuel pump or clogged fuel filter); Faulty sensor or component; Damaged wiring or a loose/corroded connector",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Measure fuel pressure with a gauge; Inspect the wiring and connectors for damage, corrosion or looseness; Replace the faulty component with a quality part; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0087/"
  },
  {
   "type": "obd2",
   "code": "P0088",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Fuel Rail/System Pressure – Pressure Too High",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Low fuel pressure (weak fuel pump or clogged fuel filter)",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Measure fuel pressure with a gauge; Inspect the wiring and connectors for damage, corrosion or looseness; Replace the faulty component with a quality part; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0088/"
  },
  {
   "type": "obd2",
   "code": "P0100",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Mass Air Flow (MAF) Sensor – Circuit Malfunction",
   "severity": "Medium",
   "causes": "Dirty or contaminated MAF sensor; Clogged air filter; Vacuum or intake air leak; Damaged wiring or a loose/corroded connector; Faulty sensor or component",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Clean the MAF sensor with dedicated MAF cleaner spray; Check for vacuum and intake leaks (a smoke test is the fastest method); Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0100/"
  },
  {
   "type": "obd2",
   "code": "P0101",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Mass Air Flow (MAF) Sensor – Range/Performance Problem",
   "severity": "Medium",
   "causes": "Dirty or contaminated MAF sensor; Clogged air filter; Vacuum or intake air leak; Damaged wiring or a loose/corroded connector; Faulty sensor or component",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Clean the MAF sensor with dedicated MAF cleaner spray; Check for vacuum and intake leaks (a smoke test is the fastest method); Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0101/"
  },
  {
   "type": "obd2",
   "code": "P0102",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Mass Air Flow (MAF) Sensor – Circuit Low",
   "severity": "Medium",
   "causes": "Dirty or contaminated MAF sensor; Clogged air filter; Vacuum or intake air leak; Damaged wiring or a loose/corroded connector; Faulty sensor or component",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Clean the MAF sensor with dedicated MAF cleaner spray; Check for vacuum and intake leaks (a smoke test is the fastest method); Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0102/"
  },
  {
   "type": "obd2",
   "code": "P0103",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Mass Air Flow (MAF) Sensor – Circuit High",
   "severity": "Medium",
   "causes": "Dirty or contaminated MAF sensor; Clogged air filter; Vacuum or intake air leak; Damaged wiring or a loose/corroded connector; Faulty sensor or component",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Clean the MAF sensor with dedicated MAF cleaner spray; Check for vacuum and intake leaks (a smoke test is the fastest method); Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0103/"
  },
  {
   "type": "obd2",
   "code": "P0105",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Manifold Absolute Pressure (MAP) Sensor – Circuit Malfunction",
   "severity": "Medium",
   "causes": "Vacuum or intake air leak; Damaged wiring or a loose/corroded connector; Faulty sensor or component; ECM software issue or internal fault",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check for vacuum and intake leaks (a smoke test is the fastest method); Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0105/"
  },
  {
   "type": "obd2",
   "code": "P0106",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Manifold Absolute Pressure (MAP) Sensor – Range/Performance Problem",
   "severity": "Medium",
   "causes": "Vacuum or intake air leak; Damaged wiring or a loose/corroded connector; Faulty sensor or component; ECM software issue or internal fault",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check for vacuum and intake leaks (a smoke test is the fastest method); Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0106/"
  },
  {
   "type": "obd2",
   "code": "P0107",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Manifold Absolute Pressure (MAP) Sensor – Circuit Low",
   "severity": "Medium",
   "causes": "Vacuum or intake air leak; Damaged wiring or a loose/corroded connector; Faulty sensor or component; ECM software issue or internal fault",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check for vacuum and intake leaks (a smoke test is the fastest method); Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0107/"
  },
  {
   "type": "obd2",
   "code": "P0108",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Manifold Absolute Pressure (MAP) Sensor – Circuit High",
   "severity": "Medium",
   "causes": "Vacuum or intake air leak; Damaged wiring or a loose/corroded connector; Faulty sensor or component; ECM software issue or internal fault",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check for vacuum and intake leaks (a smoke test is the fastest method); Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0108/"
  },
  {
   "type": "obd2",
   "code": "P0110",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Intake Air Temperature (IAT) Sensor – Circuit Malfunction",
   "severity": "Low",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Clogged air filter",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0110/"
  },
  {
   "type": "obd2",
   "code": "P0111",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Intake Air Temperature (IAT) Sensor – Range/Performance Problem",
   "severity": "Low",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Clogged air filter",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0111/"
  },
  {
   "type": "obd2",
   "code": "P0112",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Intake Air Temperature (IAT) Sensor – Circuit Low",
   "severity": "Low",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Clogged air filter",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0112/"
  },
  {
   "type": "obd2",
   "code": "P0113",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Intake Air Temperature (IAT) Sensor – Circuit High",
   "severity": "Low",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Clogged air filter",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0113/"
  },
  {
   "type": "obd2",
   "code": "P0115",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Engine Coolant Temperature (ECT) Sensor – Circuit Malfunction",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Low coolant level or a cooling system fault; Thermostat stuck open or closed",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check the coolant level and look for leaks; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0115/"
  },
  {
   "type": "obd2",
   "code": "P0116",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Engine Coolant Temperature (ECT) Sensor – Range/Performance Problem",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Low coolant level or a cooling system fault; Thermostat stuck open or closed",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check the coolant level and look for leaks; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0116/"
  },
  {
   "type": "obd2",
   "code": "P0117",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Engine Coolant Temperature (ECT) Sensor – Circuit Low",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Low coolant level or a cooling system fault; Thermostat stuck open or closed",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check the coolant level and look for leaks; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0117/"
  },
  {
   "type": "obd2",
   "code": "P0118",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Engine Coolant Temperature (ECT) Sensor – Circuit High",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Low coolant level or a cooling system fault; Thermostat stuck open or closed",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check the coolant level and look for leaks; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0118/"
  },
  {
   "type": "obd2",
   "code": "P0120",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Throttle Position Sensor (TPS) – Circuit Malfunction",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Dirty throttle body; ECM software issue or internal fault",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Inspect the wiring and connectors for damage, corrosion or looseness; Clean the throttle body and idle air passages; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0120/"
  },
  {
   "type": "obd2",
   "code": "P0121",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Throttle Position Sensor (TPS) – Range/Performance Problem",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Dirty throttle body; ECM software issue or internal fault",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Inspect the wiring and connectors for damage, corrosion or looseness; Clean the throttle body and idle air passages; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0121/"
  },
  {
   "type": "obd2",
   "code": "P0122",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Throttle Position Sensor (TPS) – Circuit Low",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Dirty throttle body; ECM software issue or internal fault",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Inspect the wiring and connectors for damage, corrosion or looseness; Clean the throttle body and idle air passages; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0122/"
  },
  {
   "type": "obd2",
   "code": "P0123",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Throttle Position Sensor (TPS) – Circuit High",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Dirty throttle body; ECM software issue or internal fault",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Inspect the wiring and connectors for damage, corrosion or looseness; Clean the throttle body and idle air passages; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0123/"
  },
  {
   "type": "obd2",
   "code": "P0128",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Coolant Thermostat – Coolant Temperature Below Regulating Temperature",
   "severity": "Low",
   "causes": "Thermostat stuck open or closed; Low coolant level or a cooling system fault; Faulty sensor or component",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check the coolant level and look for leaks; Replace the thermostat and bleed the cooling system; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0128/"
  },
  {
   "type": "obd2",
   "code": "P0130",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Oxygen (O2) Sensor (Bank 1, Sensor 1) – Circuit Malfunction",
   "severity": "Low",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Exhaust leak before the sensor",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check for exhaust leaks upstream of the sensor; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0130/"
  },
  {
   "type": "obd2",
   "code": "P0131",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Oxygen (O2) Sensor (Bank 1, Sensor 1) – Circuit Low",
   "severity": "Low",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Exhaust leak before the sensor",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check for exhaust leaks upstream of the sensor; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0131/"
  },
  {
   "type": "obd2",
   "code": "P0132",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Oxygen (O2) Sensor (Bank 1, Sensor 1) – Circuit High",
   "severity": "Low",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Exhaust leak before the sensor",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check for exhaust leaks upstream of the sensor; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0132/"
  },
  {
   "type": "obd2",
   "code": "P0133",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Oxygen (O2) Sensor (Bank 1, Sensor 1) – Slow Response",
   "severity": "Low",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Exhaust leak before the sensor",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check for exhaust leaks upstream of the sensor; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0133/"
  },
  {
   "type": "obd2",
   "code": "P0134",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Oxygen (O2) Sensor (Bank 1, Sensor 1) – No Activity Detected",
   "severity": "Low",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Exhaust leak before the sensor",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check for exhaust leaks upstream of the sensor; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0134/"
  },
  {
   "type": "obd2",
   "code": "P0135",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Oxygen (O2) Sensor (Bank 1, Sensor 1) – Heater Circuit Malfunction",
   "severity": "Low",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0135/"
  },
  {
   "type": "obd2",
   "code": "P0136",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Oxygen (O2) Sensor (Bank 1, Sensor 2) – Circuit Malfunction",
   "severity": "Low",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Exhaust leak before the sensor",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check for exhaust leaks upstream of the sensor; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0136/"
  },
  {
   "type": "obd2",
   "code": "P0137",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Oxygen (O2) Sensor (Bank 1, Sensor 2) – Circuit Low",
   "severity": "Low",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Exhaust leak before the sensor",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check for exhaust leaks upstream of the sensor; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0137/"
  },
  {
   "type": "obd2",
   "code": "P0138",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Oxygen (O2) Sensor (Bank 1, Sensor 2) – Circuit High",
   "severity": "Low",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Exhaust leak before the sensor",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check for exhaust leaks upstream of the sensor; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0138/"
  },
  {
   "type": "obd2",
   "code": "P0140",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Oxygen (O2) Sensor (Bank 1, Sensor 2) – No Activity Detected",
   "severity": "Low",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Exhaust leak before the sensor",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check for exhaust leaks upstream of the sensor; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0140/"
  },
  {
   "type": "obd2",
   "code": "P0141",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Oxygen (O2) Sensor (Bank 1, Sensor 2) – Heater Circuit Malfunction",
   "severity": "Low",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0141/"
  },
  {
   "type": "obd2",
   "code": "P0150",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Oxygen (O2) Sensor (Bank 2, Sensor 1) – Circuit Malfunction",
   "severity": "Low",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Exhaust leak before the sensor",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check for exhaust leaks upstream of the sensor; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0150/"
  },
  {
   "type": "obd2",
   "code": "P0151",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Oxygen (O2) Sensor (Bank 2, Sensor 1) – Circuit Low",
   "severity": "Low",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Exhaust leak before the sensor",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check for exhaust leaks upstream of the sensor; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0151/"
  },
  {
   "type": "obd2",
   "code": "P0152",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Oxygen (O2) Sensor (Bank 2, Sensor 1) – Circuit High",
   "severity": "Low",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Exhaust leak before the sensor",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check for exhaust leaks upstream of the sensor; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0152/"
  },
  {
   "type": "obd2",
   "code": "P0153",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Oxygen (O2) Sensor (Bank 2, Sensor 1) – Slow Response",
   "severity": "Low",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Exhaust leak before the sensor",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check for exhaust leaks upstream of the sensor; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0153/"
  },
  {
   "type": "obd2",
   "code": "P0154",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Oxygen (O2) Sensor (Bank 2, Sensor 1) – No Activity Detected",
   "severity": "Low",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Exhaust leak before the sensor",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check for exhaust leaks upstream of the sensor; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0154/"
  },
  {
   "type": "obd2",
   "code": "P0155",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Oxygen (O2) Sensor (Bank 2, Sensor 1) – Heater Circuit Malfunction",
   "severity": "Low",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0155/"
  },
  {
   "type": "obd2",
   "code": "P0156",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Oxygen (O2) Sensor (Bank 2, Sensor 2) – Circuit Malfunction",
   "severity": "Low",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Exhaust leak before the sensor",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check for exhaust leaks upstream of the sensor; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0156/"
  },
  {
   "type": "obd2",
   "code": "P0157",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Oxygen (O2) Sensor (Bank 2, Sensor 2) – Circuit Low",
   "severity": "Low",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Exhaust leak before the sensor",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check for exhaust leaks upstream of the sensor; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0157/"
  },
  {
   "type": "obd2",
   "code": "P0158",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Oxygen (O2) Sensor (Bank 2, Sensor 2) – Circuit High",
   "severity": "Low",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Exhaust leak before the sensor",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check for exhaust leaks upstream of the sensor; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0158/"
  },
  {
   "type": "obd2",
   "code": "P0160",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Oxygen (O2) Sensor (Bank 2, Sensor 2) – No Activity Detected",
   "severity": "Low",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Exhaust leak before the sensor",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check for exhaust leaks upstream of the sensor; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0160/"
  },
  {
   "type": "obd2",
   "code": "P0161",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Oxygen (O2) Sensor (Bank 2, Sensor 2) – Heater Circuit Malfunction",
   "severity": "Low",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0161/"
  },
  {
   "type": "obd2",
   "code": "P0171",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Fuel System (Bank 1) – System Too Lean",
   "severity": "Medium",
   "causes": "Vacuum or intake air leak; Dirty or contaminated MAF sensor; Low fuel pressure (weak fuel pump or clogged fuel filter); Clogged or leaking fuel injector; Exhaust leak before the sensor",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check for vacuum and intake leaks (a smoke test is the fastest method); Clean the MAF sensor with dedicated MAF cleaner spray; Measure fuel pressure with a gauge; Check for exhaust leaks upstream of the sensor; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0171/"
  },
  {
   "type": "obd2",
   "code": "P0172",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Fuel System (Bank 1) – System Too Rich",
   "severity": "Medium",
   "causes": "Clogged or leaking fuel injector; Low fuel pressure (weak fuel pump or clogged fuel filter); Dirty or contaminated MAF sensor; Faulty sensor or component",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Clean the MAF sensor with dedicated MAF cleaner spray; Measure fuel pressure with a gauge; Test the sensor with a multimeter against the manufacturer's specification; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0172/"
  },
  {
   "type": "obd2",
   "code": "P0174",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Fuel System (Bank 2) – System Too Lean",
   "severity": "Medium",
   "causes": "Vacuum or intake air leak; Dirty or contaminated MAF sensor; Low fuel pressure (weak fuel pump or clogged fuel filter); Clogged or leaking fuel injector; Exhaust leak before the sensor",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check for vacuum and intake leaks (a smoke test is the fastest method); Clean the MAF sensor with dedicated MAF cleaner spray; Measure fuel pressure with a gauge; Check for exhaust leaks upstream of the sensor; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0174/"
  },
  {
   "type": "obd2",
   "code": "P0175",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Fuel System (Bank 2) – System Too Rich",
   "severity": "Medium",
   "causes": "Clogged or leaking fuel injector; Low fuel pressure (weak fuel pump or clogged fuel filter); Dirty or contaminated MAF sensor; Faulty sensor or component",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Clean the MAF sensor with dedicated MAF cleaner spray; Measure fuel pressure with a gauge; Test the sensor with a multimeter against the manufacturer's specification; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0175/"
  },
  {
   "type": "obd2",
   "code": "P0201",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Fuel Injector (Cylinder 1) – Circuit Malfunction",
   "severity": "High",
   "causes": "Clogged or leaking fuel injector; Damaged wiring or a loose/corroded connector; ECM software issue or internal fault",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0201/"
  },
  {
   "type": "obd2",
   "code": "P0202",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Fuel Injector (Cylinder 2) – Circuit Malfunction",
   "severity": "High",
   "causes": "Clogged or leaking fuel injector; Damaged wiring or a loose/corroded connector; ECM software issue or internal fault",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0202/"
  },
  {
   "type": "obd2",
   "code": "P0203",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Fuel Injector (Cylinder 3) – Circuit Malfunction",
   "severity": "High",
   "causes": "Clogged or leaking fuel injector; Damaged wiring or a loose/corroded connector; ECM software issue or internal fault",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0203/"
  },
  {
   "type": "obd2",
   "code": "P0204",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Fuel Injector (Cylinder 4) – Circuit Malfunction",
   "severity": "High",
   "causes": "Clogged or leaking fuel injector; Damaged wiring or a loose/corroded connector; ECM software issue or internal fault",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0204/"
  },
  {
   "type": "obd2",
   "code": "P0205",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Fuel Injector (Cylinder 5) – Circuit Malfunction",
   "severity": "High",
   "causes": "Clogged or leaking fuel injector; Damaged wiring or a loose/corroded connector; ECM software issue or internal fault",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0205/"
  },
  {
   "type": "obd2",
   "code": "P0206",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Fuel Injector (Cylinder 6) – Circuit Malfunction",
   "severity": "High",
   "causes": "Clogged or leaking fuel injector; Damaged wiring or a loose/corroded connector; ECM software issue or internal fault",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0206/"
  },
  {
   "type": "obd2",
   "code": "P0207",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Fuel Injector (Cylinder 7) – Circuit Malfunction",
   "severity": "High",
   "causes": "Clogged or leaking fuel injector; Damaged wiring or a loose/corroded connector; ECM software issue or internal fault",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0207/"
  },
  {
   "type": "obd2",
   "code": "P0208",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Fuel Injector (Cylinder 8) – Circuit Malfunction",
   "severity": "High",
   "causes": "Clogged or leaking fuel injector; Damaged wiring or a loose/corroded connector; ECM software issue or internal fault",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0208/"
  },
  {
   "type": "obd2",
   "code": "P0217",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Engine – Over-Temperature Condition",
   "severity": "High",
   "causes": "Low coolant level or a cooling system fault; Thermostat stuck open or closed; Faulty fan relay, fuse or fan motor",
   "fixes": "Check the coolant level and look for leaks; Replace the thermostat and bleed the cooling system; Read all stored codes and freeze-frame data with an OBD-II scanner; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0217/"
  },
  {
   "type": "obd2",
   "code": "P0230",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Fuel Pump – Circuit Malfunction",
   "severity": "High",
   "causes": "Damaged wiring or a loose/corroded connector; Low fuel pressure (weak fuel pump or clogged fuel filter); ECM software issue or internal fault",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Inspect the wiring and connectors for damage, corrosion or looseness; Measure fuel pressure with a gauge; Replace the faulty component with a quality part; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0230/"
  },
  {
   "type": "obd2",
   "code": "P0299",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Turbocharger/Supercharger – Underboost Condition",
   "severity": "Medium",
   "causes": "Boost leak or faulty wastegate/turbo; Vacuum or intake air leak; Faulty sensor or component",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check for vacuum and intake leaks (a smoke test is the fastest method); Inspect the wiring and connectors for damage, corrosion or looseness; Replace the faulty component with a quality part; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0299/"
  },
  {
   "type": "obd2",
   "code": "P0300",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Engine – Random/Multiple Cylinder Misfire Detected",
   "severity": "High",
   "causes": "Worn spark plugs; Faulty ignition coil or plug wire; Clogged or leaking fuel injector; Vacuum or intake air leak; Low compression or a mechanical engine problem",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Swap the ignition coil or spark plug to another cylinder and see if the fault follows it; Replace the spark plugs if they are worn or due for service; Check for vacuum and intake leaks (a smoke test is the fastest method); Run a compression test; Clear the code and road-test the car to confirm the repair; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0300/"
  },
  {
   "type": "obd2",
   "code": "P0301",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Engine (Cylinder 1) – Misfire Detected",
   "severity": "High",
   "causes": "Worn spark plugs; Faulty ignition coil or plug wire; Clogged or leaking fuel injector; Vacuum or intake air leak; Low compression or a mechanical engine problem",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Swap the ignition coil or spark plug to another cylinder and see if the fault follows it; Replace the spark plugs if they are worn or due for service; Check for vacuum and intake leaks (a smoke test is the fastest method); Run a compression test; Clear the code and road-test the car to confirm the repair; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0301/"
  },
  {
   "type": "obd2",
   "code": "P0302",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Engine (Cylinder 2) – Misfire Detected",
   "severity": "High",
   "causes": "Worn spark plugs; Faulty ignition coil or plug wire; Clogged or leaking fuel injector; Vacuum or intake air leak; Low compression or a mechanical engine problem",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Swap the ignition coil or spark plug to another cylinder and see if the fault follows it; Replace the spark plugs if they are worn or due for service; Check for vacuum and intake leaks (a smoke test is the fastest method); Run a compression test; Clear the code and road-test the car to confirm the repair; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0302/"
  },
  {
   "type": "obd2",
   "code": "P0303",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Engine (Cylinder 3) – Misfire Detected",
   "severity": "High",
   "causes": "Worn spark plugs; Faulty ignition coil or plug wire; Clogged or leaking fuel injector; Vacuum or intake air leak; Low compression or a mechanical engine problem",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Swap the ignition coil or spark plug to another cylinder and see if the fault follows it; Replace the spark plugs if they are worn or due for service; Check for vacuum and intake leaks (a smoke test is the fastest method); Run a compression test; Clear the code and road-test the car to confirm the repair; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0303/"
  },
  {
   "type": "obd2",
   "code": "P0304",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Engine (Cylinder 4) – Misfire Detected",
   "severity": "High",
   "causes": "Worn spark plugs; Faulty ignition coil or plug wire; Clogged or leaking fuel injector; Vacuum or intake air leak; Low compression or a mechanical engine problem",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Swap the ignition coil or spark plug to another cylinder and see if the fault follows it; Replace the spark plugs if they are worn or due for service; Check for vacuum and intake leaks (a smoke test is the fastest method); Run a compression test; Clear the code and road-test the car to confirm the repair; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0304/"
  },
  {
   "type": "obd2",
   "code": "P0305",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Engine (Cylinder 5) – Misfire Detected",
   "severity": "High",
   "causes": "Worn spark plugs; Faulty ignition coil or plug wire; Clogged or leaking fuel injector; Vacuum or intake air leak; Low compression or a mechanical engine problem",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Swap the ignition coil or spark plug to another cylinder and see if the fault follows it; Replace the spark plugs if they are worn or due for service; Check for vacuum and intake leaks (a smoke test is the fastest method); Run a compression test; Clear the code and road-test the car to confirm the repair; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0305/"
  },
  {
   "type": "obd2",
   "code": "P0306",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Engine (Cylinder 6) – Misfire Detected",
   "severity": "High",
   "causes": "Worn spark plugs; Faulty ignition coil or plug wire; Clogged or leaking fuel injector; Vacuum or intake air leak; Low compression or a mechanical engine problem",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Swap the ignition coil or spark plug to another cylinder and see if the fault follows it; Replace the spark plugs if they are worn or due for service; Check for vacuum and intake leaks (a smoke test is the fastest method); Run a compression test; Clear the code and road-test the car to confirm the repair; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0306/"
  },
  {
   "type": "obd2",
   "code": "P0307",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Engine (Cylinder 7) – Misfire Detected",
   "severity": "High",
   "causes": "Worn spark plugs; Faulty ignition coil or plug wire; Clogged or leaking fuel injector; Vacuum or intake air leak; Low compression or a mechanical engine problem",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Swap the ignition coil or spark plug to another cylinder and see if the fault follows it; Replace the spark plugs if they are worn or due for service; Check for vacuum and intake leaks (a smoke test is the fastest method); Run a compression test; Clear the code and road-test the car to confirm the repair; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0307/"
  },
  {
   "type": "obd2",
   "code": "P0308",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Engine (Cylinder 8) – Misfire Detected",
   "severity": "High",
   "causes": "Worn spark plugs; Faulty ignition coil or plug wire; Clogged or leaking fuel injector; Vacuum or intake air leak; Low compression or a mechanical engine problem",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Swap the ignition coil or spark plug to another cylinder and see if the fault follows it; Replace the spark plugs if they are worn or due for service; Check for vacuum and intake leaks (a smoke test is the fastest method); Run a compression test; Clear the code and road-test the car to confirm the repair; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0308/"
  },
  {
   "type": "obd2",
   "code": "P0309",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Engine (Cylinder 9) – Misfire Detected",
   "severity": "High",
   "causes": "Worn spark plugs; Faulty ignition coil or plug wire; Clogged or leaking fuel injector; Vacuum or intake air leak; Low compression or a mechanical engine problem",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Swap the ignition coil or spark plug to another cylinder and see if the fault follows it; Replace the spark plugs if they are worn or due for service; Check for vacuum and intake leaks (a smoke test is the fastest method); Run a compression test; Clear the code and road-test the car to confirm the repair; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0309/"
  },
  {
   "type": "obd2",
   "code": "P0310",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Engine (Cylinder 10) – Misfire Detected",
   "severity": "High",
   "causes": "Worn spark plugs; Faulty ignition coil or plug wire; Clogged or leaking fuel injector; Vacuum or intake air leak; Low compression or a mechanical engine problem",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Swap the ignition coil or spark plug to another cylinder and see if the fault follows it; Replace the spark plugs if they are worn or due for service; Check for vacuum and intake leaks (a smoke test is the fastest method); Run a compression test; Clear the code and road-test the car to confirm the repair; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0310/"
  },
  {
   "type": "obd2",
   "code": "P0311",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Engine (Cylinder 11) – Misfire Detected",
   "severity": "High",
   "causes": "Worn spark plugs; Faulty ignition coil or plug wire; Clogged or leaking fuel injector; Vacuum or intake air leak; Low compression or a mechanical engine problem",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Swap the ignition coil or spark plug to another cylinder and see if the fault follows it; Replace the spark plugs if they are worn or due for service; Check for vacuum and intake leaks (a smoke test is the fastest method); Run a compression test; Clear the code and road-test the car to confirm the repair; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0311/"
  },
  {
   "type": "obd2",
   "code": "P0312",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Engine (Cylinder 12) – Misfire Detected",
   "severity": "High",
   "causes": "Worn spark plugs; Faulty ignition coil or plug wire; Clogged or leaking fuel injector; Vacuum or intake air leak; Low compression or a mechanical engine problem",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Swap the ignition coil or spark plug to another cylinder and see if the fault follows it; Replace the spark plugs if they are worn or due for service; Check for vacuum and intake leaks (a smoke test is the fastest method); Run a compression test; Clear the code and road-test the car to confirm the repair; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0312/"
  },
  {
   "type": "obd2",
   "code": "P0325",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Knock Sensor (Bank 1) – Circuit Malfunction",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0325/"
  },
  {
   "type": "obd2",
   "code": "P0326",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Knock Sensor (Bank 1) – Range/Performance Problem",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0326/"
  },
  {
   "type": "obd2",
   "code": "P0327",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Knock Sensor (Bank 1) – Circuit Low",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0327/"
  },
  {
   "type": "obd2",
   "code": "P0328",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Knock Sensor (Bank 1) – Circuit High",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0328/"
  },
  {
   "type": "obd2",
   "code": "P0335",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Crankshaft Position (CKP) Sensor – Circuit Malfunction",
   "severity": "High",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Stretched timing chain/belt or incorrect timing",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0335/"
  },
  {
   "type": "obd2",
   "code": "P0336",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Crankshaft Position (CKP) Sensor – Range/Performance Problem",
   "severity": "High",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Stretched timing chain/belt or incorrect timing",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0336/"
  },
  {
   "type": "obd2",
   "code": "P0340",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Camshaft Position (CMP) Sensor (Bank 1) – Circuit Malfunction",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Stretched timing chain/belt or incorrect timing; Low or incorrect engine oil",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Inspect the wiring and connectors for damage, corrosion or looseness; Check the engine oil level and condition; change it if needed; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0340/"
  },
  {
   "type": "obd2",
   "code": "P0341",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Camshaft Position (CMP) Sensor (Bank 1) – Range/Performance Problem",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Stretched timing chain/belt or incorrect timing; Low or incorrect engine oil",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Inspect the wiring and connectors for damage, corrosion or looseness; Check the engine oil level and condition; change it if needed; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0341/"
  },
  {
   "type": "obd2",
   "code": "P0351",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Ignition Coil A – Primary/Secondary Circuit Malfunction",
   "severity": "High",
   "causes": "Faulty ignition coil or plug wire; Worn spark plugs; Damaged wiring or a loose/corroded connector; ECM software issue or internal fault",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Swap the ignition coil or spark plug to another cylinder and see if the fault follows it; Inspect the wiring and connectors for damage, corrosion or looseness; Replace the spark plugs if they are worn or due for service; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0351/"
  },
  {
   "type": "obd2",
   "code": "P0352",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Ignition Coil B – Primary/Secondary Circuit Malfunction",
   "severity": "High",
   "causes": "Faulty ignition coil or plug wire; Worn spark plugs; Damaged wiring or a loose/corroded connector; ECM software issue or internal fault",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Swap the ignition coil or spark plug to another cylinder and see if the fault follows it; Inspect the wiring and connectors for damage, corrosion or looseness; Replace the spark plugs if they are worn or due for service; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0352/"
  },
  {
   "type": "obd2",
   "code": "P0353",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Ignition Coil C – Primary/Secondary Circuit Malfunction",
   "severity": "High",
   "causes": "Faulty ignition coil or plug wire; Worn spark plugs; Damaged wiring or a loose/corroded connector; ECM software issue or internal fault",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Swap the ignition coil or spark plug to another cylinder and see if the fault follows it; Inspect the wiring and connectors for damage, corrosion or looseness; Replace the spark plugs if they are worn or due for service; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0353/"
  },
  {
   "type": "obd2",
   "code": "P0354",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Ignition Coil D – Primary/Secondary Circuit Malfunction",
   "severity": "High",
   "causes": "Faulty ignition coil or plug wire; Worn spark plugs; Damaged wiring or a loose/corroded connector; ECM software issue or internal fault",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Swap the ignition coil or spark plug to another cylinder and see if the fault follows it; Inspect the wiring and connectors for damage, corrosion or looseness; Replace the spark plugs if they are worn or due for service; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0354/"
  },
  {
   "type": "obd2",
   "code": "P0355",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Ignition Coil E – Primary/Secondary Circuit Malfunction",
   "severity": "High",
   "causes": "Faulty ignition coil or plug wire; Worn spark plugs; Damaged wiring or a loose/corroded connector; ECM software issue or internal fault",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Swap the ignition coil or spark plug to another cylinder and see if the fault follows it; Inspect the wiring and connectors for damage, corrosion or looseness; Replace the spark plugs if they are worn or due for service; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0355/"
  },
  {
   "type": "obd2",
   "code": "P0356",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Ignition Coil F – Primary/Secondary Circuit Malfunction",
   "severity": "High",
   "causes": "Faulty ignition coil or plug wire; Worn spark plugs; Damaged wiring or a loose/corroded connector; ECM software issue or internal fault",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Swap the ignition coil or spark plug to another cylinder and see if the fault follows it; Inspect the wiring and connectors for damage, corrosion or looseness; Replace the spark plugs if they are worn or due for service; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0356/"
  },
  {
   "type": "obd2",
   "code": "P0357",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Ignition Coil G – Primary/Secondary Circuit Malfunction",
   "severity": "High",
   "causes": "Faulty ignition coil or plug wire; Worn spark plugs; Damaged wiring or a loose/corroded connector; ECM software issue or internal fault",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Swap the ignition coil or spark plug to another cylinder and see if the fault follows it; Inspect the wiring and connectors for damage, corrosion or looseness; Replace the spark plugs if they are worn or due for service; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0357/"
  },
  {
   "type": "obd2",
   "code": "P0358",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Ignition Coil H – Primary/Secondary Circuit Malfunction",
   "severity": "High",
   "causes": "Faulty ignition coil or plug wire; Worn spark plugs; Damaged wiring or a loose/corroded connector; ECM software issue or internal fault",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Swap the ignition coil or spark plug to another cylinder and see if the fault follows it; Inspect the wiring and connectors for damage, corrosion or looseness; Replace the spark plugs if they are worn or due for service; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0358/"
  },
  {
   "type": "obd2",
   "code": "P0400",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Exhaust Gas Recirculation (EGR) System – Flow Malfunction",
   "severity": "Medium",
   "causes": "Carbon build-up in the EGR valve or passages; Damaged wiring or a loose/corroded connector; Faulty sensor or component",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Clean the EGR valve and passages; Inspect the wiring and connectors for damage, corrosion or looseness; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0400/"
  },
  {
   "type": "obd2",
   "code": "P0401",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Exhaust Gas Recirculation (EGR) System – Insufficient Flow Detected",
   "severity": "Medium",
   "causes": "Carbon build-up in the EGR valve or passages; Damaged wiring or a loose/corroded connector; Faulty sensor or component",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Clean the EGR valve and passages; Inspect the wiring and connectors for damage, corrosion or looseness; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0401/"
  },
  {
   "type": "obd2",
   "code": "P0402",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Exhaust Gas Recirculation (EGR) System – Excessive Flow Detected",
   "severity": "Medium",
   "causes": "Carbon build-up in the EGR valve or passages; Damaged wiring or a loose/corroded connector; Faulty sensor or component",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Clean the EGR valve and passages; Inspect the wiring and connectors for damage, corrosion or looseness; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0402/"
  },
  {
   "type": "obd2",
   "code": "P0420",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Catalytic Converter (Bank 1) – Efficiency Below Threshold",
   "severity": "Low",
   "causes": "Worn or damaged catalytic converter; Faulty sensor or component; Exhaust leak before the sensor; Faulty ignition coil or plug wire",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Fix any misfire or fuel-trim codes first, as they often cause this code; Check for exhaust leaks upstream of the sensor; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0420/"
  },
  {
   "type": "obd2",
   "code": "P0430",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Catalytic Converter (Bank 2) – Efficiency Below Threshold",
   "severity": "Low",
   "causes": "Worn or damaged catalytic converter; Faulty sensor or component; Exhaust leak before the sensor; Faulty ignition coil or plug wire",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Fix any misfire or fuel-trim codes first, as they often cause this code; Check for exhaust leaks upstream of the sensor; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0430/"
  },
  {
   "type": "obd2",
   "code": "P0440",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Evaporative Emission (EVAP) System – Malfunction",
   "severity": "Low",
   "causes": "Loose, damaged or missing fuel cap; Faulty purge or vent valve; Damaged wiring or a loose/corroded connector",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Tighten or replace the fuel cap; Check for vacuum and intake leaks (a smoke test is the fastest method); Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0440/"
  },
  {
   "type": "obd2",
   "code": "P0441",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Evaporative Emission (EVAP) System – Incorrect Purge Flow",
   "severity": "Low",
   "causes": "Loose, damaged or missing fuel cap; Faulty purge or vent valve; Damaged wiring or a loose/corroded connector",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Tighten or replace the fuel cap; Check for vacuum and intake leaks (a smoke test is the fastest method); Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0441/"
  },
  {
   "type": "obd2",
   "code": "P0442",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Evaporative Emission (EVAP) System – Small Leak Detected",
   "severity": "Low",
   "causes": "Loose, damaged or missing fuel cap; Faulty purge or vent valve; Damaged wiring or a loose/corroded connector",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Tighten or replace the fuel cap; Check for vacuum and intake leaks (a smoke test is the fastest method); Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0442/"
  },
  {
   "type": "obd2",
   "code": "P0446",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Evaporative Emission (EVAP) System – Vent Control Circuit Malfunction",
   "severity": "Low",
   "causes": "Loose, damaged or missing fuel cap; Faulty purge or vent valve; Damaged wiring or a loose/corroded connector",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Tighten or replace the fuel cap; Check for vacuum and intake leaks (a smoke test is the fastest method); Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0446/"
  },
  {
   "type": "obd2",
   "code": "P0455",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Evaporative Emission (EVAP) System – Large Leak Detected",
   "severity": "Low",
   "causes": "Loose, damaged or missing fuel cap; Faulty purge or vent valve; Damaged wiring or a loose/corroded connector",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Tighten or replace the fuel cap; Check for vacuum and intake leaks (a smoke test is the fastest method); Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0455/"
  },
  {
   "type": "obd2",
   "code": "P0456",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Evaporative Emission (EVAP) System – Very Small Leak Detected",
   "severity": "Low",
   "causes": "Loose, damaged or missing fuel cap; Faulty purge or vent valve; Damaged wiring or a loose/corroded connector",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Tighten or replace the fuel cap; Check for vacuum and intake leaks (a smoke test is the fastest method); Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0456/"
  },
  {
   "type": "obd2",
   "code": "P0480",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Cooling Fan – Control Circuit Malfunction",
   "severity": "High",
   "causes": "Faulty fan relay, fuse or fan motor; Damaged wiring or a loose/corroded connector; ECM software issue or internal fault",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check the coolant level and look for leaks; Inspect the wiring and connectors for damage, corrosion or looseness; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0480/"
  },
  {
   "type": "obd2",
   "code": "P0500",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Vehicle Speed Sensor (VSS) – Malfunction",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0500/"
  },
  {
   "type": "obd2",
   "code": "P0505",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Idle Air Control System – Malfunction",
   "severity": "Low",
   "causes": "Dirty throttle body; Vacuum or intake air leak; Faulty sensor or component; Damaged wiring or a loose/corroded connector",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Clean the throttle body and idle air passages; Check for vacuum and intake leaks (a smoke test is the fastest method); Inspect the wiring and connectors for damage, corrosion or looseness; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0505/"
  },
  {
   "type": "obd2",
   "code": "P0506",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Idle Air Control System – Idle RPM Lower Than Expected",
   "severity": "Low",
   "causes": "Dirty throttle body; Vacuum or intake air leak; Faulty sensor or component; Damaged wiring or a loose/corroded connector",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Clean the throttle body and idle air passages; Check for vacuum and intake leaks (a smoke test is the fastest method); Inspect the wiring and connectors for damage, corrosion or looseness; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0506/"
  },
  {
   "type": "obd2",
   "code": "P0507",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Idle Air Control System – Idle RPM Higher Than Expected",
   "severity": "Low",
   "causes": "Dirty throttle body; Vacuum or intake air leak; Faulty sensor or component; Damaged wiring or a loose/corroded connector",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Clean the throttle body and idle air passages; Check for vacuum and intake leaks (a smoke test is the fastest method); Inspect the wiring and connectors for damage, corrosion or looseness; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0507/"
  },
  {
   "type": "obd2",
   "code": "P0562",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "System Voltage – Voltage Low",
   "severity": "Medium",
   "causes": "Faulty alternator, voltage regulator or battery; Damaged wiring or a loose/corroded connector",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Test the battery and alternator (about 13.5–14.7 V with the engine running); Inspect the wiring and connectors for damage, corrosion or looseness; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0562/"
  },
  {
   "type": "obd2",
   "code": "P0563",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "System Voltage – Voltage High",
   "severity": "Medium",
   "causes": "Faulty alternator, voltage regulator or battery; Damaged wiring or a loose/corroded connector",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Test the battery and alternator (about 13.5–14.7 V with the engine running); Inspect the wiring and connectors for damage, corrosion or looseness; Replace the faulty component with a quality part; Clear the code and road-test the car to confirm the repair",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0563/"
  },
  {
   "type": "obd2",
   "code": "P0601",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Engine Control Module (ECM/PCM) – Internal Memory Checksum Error",
   "severity": "High",
   "causes": "ECM software issue or internal fault; Faulty alternator, voltage regulator or battery; Damaged wiring or a loose/corroded connector",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Test the battery and alternator (about 13.5–14.7 V with the engine running); Check for ECM software updates and technical service bulletins; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0601/"
  },
  {
   "type": "obd2",
   "code": "P0606",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Engine Control Module (ECM/PCM) – Processor Fault",
   "severity": "High",
   "causes": "ECM software issue or internal fault; Faulty alternator, voltage regulator or battery; Damaged wiring or a loose/corroded connector",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Test the battery and alternator (about 13.5–14.7 V with the engine running); Check for ECM software updates and technical service bulletins; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0606/"
  },
  {
   "type": "obd2",
   "code": "P0700",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Transmission Control System – Malfunction",
   "severity": "Medium",
   "causes": "Low or degraded transmission fluid; Faulty transmission solenoid or valve body; Damaged wiring or a loose/corroded connector; Faulty sensor or component",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check the transmission fluid level and condition; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0700/"
  },
  {
   "type": "obd2",
   "code": "P0705",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Transmission Range Sensor – Circuit Malfunction",
   "severity": "Medium",
   "causes": "Low or degraded transmission fluid; Faulty transmission solenoid or valve body; Damaged wiring or a loose/corroded connector; Faulty sensor or component",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check the transmission fluid level and condition; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0705/"
  },
  {
   "type": "obd2",
   "code": "P0715",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Input/Turbine Speed Sensor – Circuit Malfunction",
   "severity": "Medium",
   "causes": "Low or degraded transmission fluid; Faulty transmission solenoid or valve body; Damaged wiring or a loose/corroded connector; Faulty sensor or component",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check the transmission fluid level and condition; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0715/"
  },
  {
   "type": "obd2",
   "code": "P0720",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Output Speed Sensor – Circuit Malfunction",
   "severity": "Medium",
   "causes": "Low or degraded transmission fluid; Faulty transmission solenoid or valve body; Damaged wiring or a loose/corroded connector; Faulty sensor or component",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check the transmission fluid level and condition; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0720/"
  },
  {
   "type": "obd2",
   "code": "P0730",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Transmission Gear Ratio – Incorrect Ratio",
   "severity": "High",
   "causes": "Low or degraded transmission fluid; Faulty transmission solenoid or valve body; Damaged wiring or a loose/corroded connector; Faulty sensor or component",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check the transmission fluid level and condition; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0730/"
  },
  {
   "type": "obd2",
   "code": "P0740",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Torque Converter Clutch – Circuit Malfunction",
   "severity": "Medium",
   "causes": "Low or degraded transmission fluid; Faulty transmission solenoid or valve body; Damaged wiring or a loose/corroded connector; Faulty sensor or component",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check the transmission fluid level and condition; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0740/"
  },
  {
   "type": "obd2",
   "code": "P0750",
   "brand": "",
   "device": "Car (OBD-II)",
   "meaning": "Shift Solenoid A – Circuit Malfunction",
   "severity": "Medium",
   "causes": "Low or degraded transmission fluid; Faulty transmission solenoid or valve body; Damaged wiring or a loose/corroded connector; Faulty sensor or component",
   "fixes": "Read all stored codes and freeze-frame data with an OBD-II scanner; Check the transmission fluid level and condition; Inspect the wiring and connectors for damage, corrosion or looseness; Test the sensor with a multimeter against the manufacturer's specification; Replace the faulty component with a quality part; If unsure, have a qualified mechanic diagnose it",
   "source": "SAE J2012 / ISO 15031-6",
   "url": "https://errora.com.tr/en/obd2/p0750/"
  },
  {
   "type": "washer",
   "code": "4C",
   "brand": "Samsung",
   "device": "Washing machine",
   "meaning": "Water not filling (water supply problem)",
   "severity": "Medium",
   "causes": "Water tap closed or low water pressure; Kinked inlet hose or clogged inlet filter; Faulty water inlet valve; Faulty control or motor board",
   "fixes": "Make sure the tap is fully open and the water pressure is normal; Straighten the inlet hose and clean the small filter where it connects to the machine; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10000997/",
   "url": "https://errora.com.tr/en/washer/samsung/4c/"
  },
  {
   "type": "washer",
   "code": "4C2",
   "brand": "Samsung",
   "device": "Washing machine",
   "meaning": "Hot and cold water hoses reversed",
   "severity": "Low",
   "causes": "Hot and cold inlet hoses connected the wrong way round",
   "fixes": "Swap the hot and cold inlet hoses; Unplug the machine for a few minutes, then switch it back on (reset)",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10000997/",
   "url": "https://errora.com.tr/en/washer/samsung/4c2/"
  },
  {
   "type": "washer",
   "code": "5C",
   "brand": "Samsung",
   "device": "Washing machine",
   "meaning": "Water not draining",
   "severity": "Medium",
   "causes": "Clogged drain pump filter; Kinked, blocked or too high drain hose; Faulty drain pump; Too much detergent or a non-low-suds detergent",
   "fixes": "Clean the drain pump filter (usually behind the small flap at the front bottom); Straighten the drain hose and check it isn't blocked or placed too high; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10000997/",
   "url": "https://errora.com.tr/en/washer/samsung/5c/"
  },
  {
   "type": "washer",
   "code": "LC",
   "brand": "Samsung",
   "device": "Washing machine",
   "meaning": "Water leak detected in the base",
   "severity": "High",
   "causes": "Leaking hose, seal or pump; Too much detergent or a non-low-suds detergent; Faulty water level (pressure) sensor or its hose",
   "fixes": "Unplug the machine, close the tap and check underneath for water or leaks; Use less detergent (low-suds / HE type only) and run a drum clean cycle; If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10000997/",
   "url": "https://errora.com.tr/en/washer/samsung/lc/"
  },
  {
   "type": "washer",
   "code": "OC",
   "brand": "Samsung",
   "device": "Washing machine",
   "meaning": "Too much water in the drum (overflow)",
   "severity": "High",
   "causes": "Faulty water inlet valve; Faulty water level (pressure) sensor or its hose; Faulty control or motor board",
   "fixes": "Unplug the machine, close the tap and check underneath for water or leaks; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10000997/",
   "url": "https://errora.com.tr/en/washer/samsung/oc/"
  },
  {
   "type": "washer",
   "code": "dC",
   "brand": "Samsung",
   "device": "Washing machine",
   "meaning": "Door not closed or not locked",
   "severity": "Low",
   "causes": "Laundry caught in the door or door seal; Damaged door latch or door lock; Damaged wiring or a loose/corroded connector",
   "fixes": "Open and firmly close the door, removing anything caught in the seal; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10000997/",
   "url": "https://errora.com.tr/en/washer/samsung/dc/"
  },
  {
   "type": "washer",
   "code": "UB",
   "brand": "Samsung",
   "device": "Washing machine",
   "meaning": "Unbalanced load, spin stopped",
   "severity": "Low",
   "causes": "Uneven load or a single heavy item; Transport bolts not removed or machine not level",
   "fixes": "Spread the laundry evenly in the drum and restart; Make sure the machine is level and the transport bolts have been removed; Reduce the load size",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10000997/",
   "url": "https://errora.com.tr/en/washer/samsung/ub/"
  },
  {
   "type": "washer",
   "code": "SUd",
   "brand": "Samsung",
   "device": "Washing machine",
   "meaning": "Too much foam (suds) detected",
   "severity": "Low",
   "causes": "Too much detergent or a non-low-suds detergent",
   "fixes": "Use less detergent (low-suds / HE type only) and run a drum clean cycle; Run a drum clean (tub clean) cycle with washing machine cleaner",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10000997/",
   "url": "https://errora.com.tr/en/washer/samsung/sud/"
  },
  {
   "type": "washer",
   "code": "3C",
   "brand": "Samsung",
   "device": "Washing machine",
   "meaning": "Motor fault",
   "severity": "Medium",
   "causes": "Worn motor brushes or faulty motor; Foreign object (coin, underwire) jamming the drum; Faulty control or motor board; Damaged wiring or a loose/corroded connector",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); Check the drum and drain filter for foreign objects; Reduce the load size; If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10000997/",
   "url": "https://errora.com.tr/en/washer/samsung/3c/"
  },
  {
   "type": "washer",
   "code": "HC",
   "brand": "Samsung",
   "device": "Washing machine",
   "meaning": "Heating fault, water not heating",
   "severity": "Medium",
   "causes": "Faulty heating element; Faulty temperature sensor (NTC thermistor); Damaged wiring or a loose/corroded connector",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); Have a technician test the heating element and temperature sensor; If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10000997/",
   "url": "https://errora.com.tr/en/washer/samsung/hc/"
  },
  {
   "type": "washer",
   "code": "tC",
   "brand": "Samsung",
   "device": "Washing machine",
   "meaning": "Temperature sensor (thermistor) fault",
   "severity": "Medium",
   "causes": "Faulty temperature sensor (NTC thermistor); Damaged wiring or a loose/corroded connector",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); Have a technician test the heating element and temperature sensor; If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10000997/",
   "url": "https://errora.com.tr/en/washer/samsung/tc/"
  },
  {
   "type": "washer",
   "code": "AC",
   "brand": "Samsung",
   "device": "Washing machine",
   "meaning": "Communication error between control boards",
   "severity": "Medium",
   "causes": "Faulty control or motor board; Damaged wiring or a loose/corroded connector; Unstable mains power or a loose plug/socket",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10000997/",
   "url": "https://errora.com.tr/en/washer/samsung/ac/"
  },
  {
   "type": "washer",
   "code": "bE",
   "brand": "Samsung",
   "device": "Washing machine",
   "meaning": "Motor speed (Hall) sensor fault",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Worn motor brushes or faulty motor",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); Inspect the wiring and connectors for damage, corrosion or looseness; If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10000997/",
   "url": "https://errora.com.tr/en/washer/samsung/be/"
  },
  {
   "type": "washer",
   "code": "9C1",
   "brand": "Samsung",
   "device": "Washing machine",
   "meaning": "Power supply voltage out of range",
   "severity": "Medium",
   "causes": "Unstable mains power or a loose plug/socket",
   "fixes": "Plug directly into a wall socket (no extension lead) and check your power supply; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10000997/",
   "url": "https://errora.com.tr/en/washer/samsung/9c1/"
  },
  {
   "type": "washer",
   "code": "PF",
   "brand": "Samsung",
   "device": "Washing machine",
   "meaning": "Power cut during the cycle",
   "severity": "Low",
   "causes": "Unstable mains power or a loose plug/socket",
   "fixes": "Plug directly into a wall socket (no extension lead) and check your power supply; Unplug the machine for a few minutes, then switch it back on (reset)",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10000997/",
   "url": "https://errora.com.tr/en/washer/samsung/pf/"
  },
  {
   "type": "washer",
   "code": "E2",
   "brand": "Samsung",
   "device": "Washing machine",
   "meaning": "Button stuck or held down",
   "severity": "Low",
   "causes": "A button stuck or pressed for too long",
   "fixes": "Check that no button is stuck and gently clean the control panel; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10000997/",
   "url": "https://errora.com.tr/en/washer/samsung/e2/"
  },
  {
   "type": "washer",
   "code": "SDC",
   "brand": "Samsung",
   "device": "Washing machine",
   "meaning": "Detergent drawer not closed",
   "severity": "Low",
   "causes": "Detergent drawer not fully closed",
   "fixes": "Push the detergent drawer fully closed",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10000997/",
   "url": "https://errora.com.tr/en/washer/samsung/sdc/"
  },
  {
   "type": "washer",
   "code": "SF",
   "brand": "Samsung",
   "device": "Washing machine",
   "meaning": "Control system error",
   "severity": "Medium",
   "causes": "Faulty control or motor board; Unstable mains power or a loose plug/socket",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10000997/",
   "url": "https://errora.com.tr/en/washer/samsung/sf/"
  },
  {
   "type": "washer",
   "code": "CL",
   "brand": "Samsung",
   "device": "Washing machine",
   "meaning": "Child lock is on",
   "severity": "Info (not a fault)",
   "causes": "The child lock function has been switched on",
   "fixes": "Press and hold the child lock button (or button combination) for about 3 seconds",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10000997/",
   "url": "https://errora.com.tr/en/washer/samsung/cl/"
  },
  {
   "type": "washer",
   "code": "IE",
   "brand": "LG",
   "device": "Washing machine",
   "meaning": "Water not filling (water supply problem)",
   "severity": "Medium",
   "causes": "Water tap closed or low water pressure; Kinked inlet hose or clogged inlet filter; Faulty water inlet valve; Faulty control or motor board",
   "fixes": "Make sure the tap is fully open and the water pressure is normal; Straighten the inlet hose and clean the small filter where it connects to the machine; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.lg.com/ae/support/product-help/CT20076046-20153792986245 https://www.whitegoodshelp.co.uk/lg-washing-machine-error-codes/",
   "url": "https://errora.com.tr/en/washer/lg/ie/"
  },
  {
   "type": "washer",
   "code": "OE",
   "brand": "LG",
   "device": "Washing machine",
   "meaning": "Water not draining",
   "severity": "Medium",
   "causes": "Clogged drain pump filter; Kinked, blocked or too high drain hose; Faulty drain pump; Too much detergent or a non-low-suds detergent",
   "fixes": "Clean the drain pump filter (usually behind the small flap at the front bottom); Straighten the drain hose and check it isn't blocked or placed too high; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.lg.com/ae/support/product-help/CT20076046-20153792986245 https://www.whitegoodshelp.co.uk/lg-washing-machine-error-codes/",
   "url": "https://errora.com.tr/en/washer/lg/oe/"
  },
  {
   "type": "washer",
   "code": "UE",
   "brand": "LG",
   "device": "Washing machine",
   "meaning": "Unbalanced load, spin stopped",
   "severity": "Low",
   "causes": "Uneven load or a single heavy item; Transport bolts not removed or machine not level",
   "fixes": "Spread the laundry evenly in the drum and restart; Make sure the machine is level and the transport bolts have been removed; Reduce the load size",
   "source": "https://www.lg.com/ae/support/product-help/CT20076046-20153792986245 https://www.whitegoodshelp.co.uk/lg-washing-machine-error-codes/",
   "url": "https://errora.com.tr/en/washer/lg/ue/"
  },
  {
   "type": "washer",
   "code": "dE",
   "brand": "LG",
   "device": "Washing machine",
   "meaning": "Door not closed or not locked",
   "severity": "Low",
   "causes": "Laundry caught in the door or door seal; Damaged door latch or door lock; Damaged wiring or a loose/corroded connector",
   "fixes": "Open and firmly close the door, removing anything caught in the seal; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.lg.com/ae/support/product-help/CT20076046-20153792986245 https://www.whitegoodshelp.co.uk/lg-washing-machine-error-codes/",
   "url": "https://errora.com.tr/en/washer/lg/de/"
  },
  {
   "type": "washer",
   "code": "LE",
   "brand": "LG",
   "device": "Washing machine",
   "meaning": "Motor locked, drum cannot turn",
   "severity": "Medium",
   "causes": "Foreign object (coin, underwire) jamming the drum; Uneven load or a single heavy item; Worn motor brushes or faulty motor",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); Reduce the load size; Check the drum and drain filter for foreign objects; If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.lg.com/ae/support/product-help/CT20076046-20153792986245 https://www.whitegoodshelp.co.uk/lg-washing-machine-error-codes/",
   "url": "https://errora.com.tr/en/washer/lg/le/"
  },
  {
   "type": "washer",
   "code": "CE",
   "brand": "LG",
   "device": "Washing machine",
   "meaning": "Motor over-current fault",
   "severity": "High",
   "causes": "Worn motor brushes or faulty motor; Unstable mains power or a loose plug/socket; Faulty control or motor board",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); Plug directly into a wall socket (no extension lead) and check your power supply; If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.lg.com/ae/support/product-help/CT20076046-20153792986245 https://www.whitegoodshelp.co.uk/lg-washing-machine-error-codes/",
   "url": "https://errora.com.tr/en/washer/lg/ce/"
  },
  {
   "type": "washer",
   "code": "SE",
   "brand": "LG",
   "device": "Washing machine",
   "meaning": "Motor speed (Hall) sensor fault",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Worn motor brushes or faulty motor",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); Inspect the wiring and connectors for damage, corrosion or looseness; If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.lg.com/ae/support/product-help/CT20076046-20153792986245 https://www.whitegoodshelp.co.uk/lg-washing-machine-error-codes/",
   "url": "https://errora.com.tr/en/washer/lg/se/"
  },
  {
   "type": "washer",
   "code": "PE",
   "brand": "LG",
   "device": "Washing machine",
   "meaning": "Water level (pressure) sensor fault",
   "severity": "Medium",
   "causes": "Faulty water level (pressure) sensor or its hose; Clogged drain pump filter; Damaged wiring or a loose/corroded connector",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); Clean the drain pump filter (usually behind the small flap at the front bottom); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.lg.com/ae/support/product-help/CT20076046-20153792986245 https://www.whitegoodshelp.co.uk/lg-washing-machine-error-codes/",
   "url": "https://errora.com.tr/en/washer/lg/pe/"
  },
  {
   "type": "washer",
   "code": "tE",
   "brand": "LG",
   "device": "Washing machine",
   "meaning": "Temperature sensor (thermistor) fault",
   "severity": "Medium",
   "causes": "Faulty temperature sensor (NTC thermistor); Damaged wiring or a loose/corroded connector",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); Have a technician test the heating element and temperature sensor; If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.lg.com/ae/support/product-help/CT20076046-20153792986245 https://www.whitegoodshelp.co.uk/lg-washing-machine-error-codes/",
   "url": "https://errora.com.tr/en/washer/lg/te/"
  },
  {
   "type": "washer",
   "code": "AE",
   "brand": "LG",
   "device": "Washing machine",
   "meaning": "Water leak detected in the base",
   "severity": "High",
   "causes": "Leaking hose, seal or pump; Too much detergent or a non-low-suds detergent; Faulty water level (pressure) sensor or its hose",
   "fixes": "Unplug the machine, close the tap and check underneath for water or leaks; Use less detergent (low-suds / HE type only) and run a drum clean cycle; If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.lg.com/ae/support/product-help/CT20076046-20153792986245 https://www.whitegoodshelp.co.uk/lg-washing-machine-error-codes/",
   "url": "https://errora.com.tr/en/washer/lg/ae/"
  },
  {
   "type": "washer",
   "code": "FE",
   "brand": "LG",
   "device": "Washing machine",
   "meaning": "Too much water in the drum (overflow)",
   "severity": "High",
   "causes": "Faulty water inlet valve; Faulty water level (pressure) sensor or its hose; Faulty control or motor board",
   "fixes": "Unplug the machine, close the tap and check underneath for water or leaks; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.lg.com/ae/support/product-help/CT20076046-20153792986245 https://www.whitegoodshelp.co.uk/lg-washing-machine-error-codes/",
   "url": "https://errora.com.tr/en/washer/lg/fe/"
  },
  {
   "type": "washer",
   "code": "PF",
   "brand": "LG",
   "device": "Washing machine",
   "meaning": "Power cut during the cycle",
   "severity": "Low",
   "causes": "Unstable mains power or a loose plug/socket",
   "fixes": "Plug directly into a wall socket (no extension lead) and check your power supply; Unplug the machine for a few minutes, then switch it back on (reset)",
   "source": "https://www.lg.com/ae/support/product-help/CT20076046-20153792986245 https://www.whitegoodshelp.co.uk/lg-washing-machine-error-codes/",
   "url": "https://errora.com.tr/en/washer/lg/pf/"
  },
  {
   "type": "washer",
   "code": "Sud",
   "brand": "LG",
   "device": "Washing machine",
   "meaning": "Too much foam (suds) detected",
   "severity": "Low",
   "causes": "Too much detergent or a non-low-suds detergent",
   "fixes": "Use less detergent (low-suds / HE type only) and run a drum clean cycle; Run a drum clean (tub clean) cycle with washing machine cleaner",
   "source": "https://www.lg.com/ae/support/product-help/CT20076046-20153792986245 https://www.whitegoodshelp.co.uk/lg-washing-machine-error-codes/",
   "url": "https://errora.com.tr/en/washer/lg/sud/"
  },
  {
   "type": "washer",
   "code": "CL",
   "brand": "LG",
   "device": "Washing machine",
   "meaning": "Child lock is on",
   "severity": "Info (not a fault)",
   "causes": "The child lock function has been switched on",
   "fixes": "Press and hold the child lock button (or button combination) for about 3 seconds",
   "source": "https://www.lg.com/ae/support/product-help/CT20076046-20153792986245 https://www.whitegoodshelp.co.uk/lg-washing-machine-error-codes/",
   "url": "https://errora.com.tr/en/washer/lg/cl/"
  },
  {
   "type": "washer",
   "code": "tCL",
   "brand": "LG",
   "device": "Washing machine",
   "meaning": "Drum clean reminder",
   "severity": "Info (not a fault)",
   "causes": "Detergent residue and odour build-up in the drum",
   "fixes": "Run a drum clean (tub clean) cycle with washing machine cleaner",
   "source": "https://www.lg.com/ae/support/product-help/CT20076046-20153792986245 https://www.whitegoodshelp.co.uk/lg-washing-machine-error-codes/",
   "url": "https://errora.com.tr/en/washer/lg/tcl/"
  },
  {
   "type": "washer",
   "code": "E18",
   "brand": "Bosch / Siemens",
   "device": "Washing machine",
   "meaning": "Water not draining",
   "severity": "Medium",
   "causes": "Clogged drain pump filter; Kinked, blocked or too high drain hose; Faulty drain pump; Too much detergent or a non-low-suds detergent",
   "fixes": "Clean the drain pump filter (usually behind the small flap at the front bottom); Straighten the drain hose and check it isn't blocked or placed too high; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.coolblue.de/en/advice/bosch-siemens-washing-machine-errors.html",
   "url": "https://errora.com.tr/en/washer/bosch/e18/"
  },
  {
   "type": "washer",
   "code": "E17",
   "brand": "Bosch / Siemens",
   "device": "Washing machine",
   "meaning": "Water not filling (water supply problem)",
   "severity": "Medium",
   "causes": "Water tap closed or low water pressure; Kinked inlet hose or clogged inlet filter; Faulty water inlet valve; Faulty control or motor board",
   "fixes": "Make sure the tap is fully open and the water pressure is normal; Straighten the inlet hose and clean the small filter where it connects to the machine; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.coolblue.de/en/advice/bosch-siemens-washing-machine-errors.html",
   "url": "https://errora.com.tr/en/washer/bosch/e17/"
  },
  {
   "type": "washer",
   "code": "E23",
   "brand": "Bosch / Siemens",
   "device": "Washing machine",
   "meaning": "Water leak detected in the base",
   "severity": "High",
   "causes": "Leaking hose, seal or pump; Too much detergent or a non-low-suds detergent; Faulty water level (pressure) sensor or its hose",
   "fixes": "Unplug the machine, close the tap and check underneath for water or leaks; Use less detergent (low-suds / HE type only) and run a drum clean cycle; If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.coolblue.de/en/advice/bosch-siemens-washing-machine-errors.html",
   "url": "https://errora.com.tr/en/washer/bosch/e23/"
  },
  {
   "type": "washer",
   "code": "E32",
   "brand": "Bosch / Siemens",
   "device": "Washing machine",
   "meaning": "Unbalanced load, spin stopped",
   "severity": "Low",
   "causes": "Uneven load or a single heavy item; Transport bolts not removed or machine not level",
   "fixes": "Spread the laundry evenly in the drum and restart; Make sure the machine is level and the transport bolts have been removed; Reduce the load size",
   "source": "https://www.coolblue.de/en/advice/bosch-siemens-washing-machine-errors.html",
   "url": "https://errora.com.tr/en/washer/bosch/e32/"
  },
  {
   "type": "washer",
   "code": "E16",
   "brand": "Bosch / Siemens",
   "device": "Washing machine",
   "meaning": "Laundry caught in the door",
   "severity": "Low",
   "causes": "Laundry caught in the door or door seal",
   "fixes": "Open and firmly close the door, removing anything caught in the seal; Unplug the machine for a few minutes, then switch it back on (reset)",
   "source": "https://www.coolblue.de/en/advice/bosch-siemens-washing-machine-errors.html",
   "url": "https://errora.com.tr/en/washer/bosch/e16/"
  },
  {
   "type": "washer",
   "code": "E21",
   "brand": "Bosch / Siemens",
   "device": "Washing machine",
   "meaning": "Motor fault",
   "severity": "Medium",
   "causes": "Worn motor brushes or faulty motor; Foreign object (coin, underwire) jamming the drum; Faulty control or motor board; Damaged wiring or a loose/corroded connector",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); Check the drum and drain filter for foreign objects; Reduce the load size; If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.coolblue.de/en/advice/bosch-siemens-washing-machine-errors.html",
   "url": "https://errora.com.tr/en/washer/bosch/e21/"
  },
  {
   "type": "washer",
   "code": "E10",
   "brand": "Bosch / Siemens",
   "device": "Washing machine",
   "meaning": "Automatic detergent dosing fault",
   "severity": "Low",
   "causes": "Fault in the automatic dosing or dispenser system",
   "fixes": "Add detergent manually to the drawer until the dosing system is repaired; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.coolblue.de/en/advice/bosch-siemens-washing-machine-errors.html",
   "url": "https://errora.com.tr/en/washer/bosch/e10/"
  },
  {
   "type": "washer",
   "code": "E10",
   "brand": "Electrolux / AEG",
   "device": "Washing machine",
   "meaning": "Water not filling (water supply problem)",
   "severity": "Medium",
   "causes": "Water tap closed or low water pressure; Kinked inlet hose or clogged inlet filter; Faulty water inlet valve; Faulty control or motor board",
   "fixes": "Make sure the tap is fully open and the water pressure is normal; Straighten the inlet hose and clean the small filter where it connects to the machine; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://support.electrolux.co.uk/support-articles/article/electrolux-washing-machine-displays-an-error-code-causes-and-solutions",
   "url": "https://errora.com.tr/en/washer/electrolux/e10/"
  },
  {
   "type": "washer",
   "code": "E20",
   "brand": "Electrolux / AEG",
   "device": "Washing machine",
   "meaning": "Water not draining",
   "severity": "Medium",
   "causes": "Clogged drain pump filter; Kinked, blocked or too high drain hose; Faulty drain pump; Too much detergent or a non-low-suds detergent",
   "fixes": "Clean the drain pump filter (usually behind the small flap at the front bottom); Straighten the drain hose and check it isn't blocked or placed too high; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://support.electrolux.co.uk/support-articles/article/electrolux-washing-machine-displays-an-error-code-causes-and-solutions",
   "url": "https://errora.com.tr/en/washer/electrolux/e20/"
  },
  {
   "type": "washer",
   "code": "E30",
   "brand": "Electrolux / AEG",
   "device": "Washing machine",
   "meaning": "Water level (pressure) sensor fault",
   "severity": "Medium",
   "causes": "Faulty water level (pressure) sensor or its hose; Clogged drain pump filter; Damaged wiring or a loose/corroded connector",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); Clean the drain pump filter (usually behind the small flap at the front bottom); If the code keeps coming back, contact an authorised service technician",
   "source": "https://support.electrolux.co.uk/support-articles/article/electrolux-washing-machine-displays-an-error-code-causes-and-solutions",
   "url": "https://errora.com.tr/en/washer/electrolux/e30/"
  },
  {
   "type": "washer",
   "code": "E40",
   "brand": "Electrolux / AEG",
   "device": "Washing machine",
   "meaning": "Door not closed or not locked",
   "severity": "Low",
   "causes": "Laundry caught in the door or door seal; Damaged door latch or door lock; Damaged wiring or a loose/corroded connector",
   "fixes": "Open and firmly close the door, removing anything caught in the seal; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://support.electrolux.co.uk/support-articles/article/electrolux-washing-machine-displays-an-error-code-causes-and-solutions",
   "url": "https://errora.com.tr/en/washer/electrolux/e40/"
  },
  {
   "type": "washer",
   "code": "E50",
   "brand": "Electrolux / AEG",
   "device": "Washing machine",
   "meaning": "Motor fault",
   "severity": "Medium",
   "causes": "Worn motor brushes or faulty motor; Foreign object (coin, underwire) jamming the drum; Faulty control or motor board; Damaged wiring or a loose/corroded connector",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); Check the drum and drain filter for foreign objects; Reduce the load size; If the code keeps coming back, contact an authorised service technician",
   "source": "https://support.electrolux.co.uk/support-articles/article/electrolux-washing-machine-displays-an-error-code-causes-and-solutions",
   "url": "https://errora.com.tr/en/washer/electrolux/e50/"
  },
  {
   "type": "washer",
   "code": "E60",
   "brand": "Electrolux / AEG",
   "device": "Washing machine",
   "meaning": "Heating fault, water not heating",
   "severity": "Medium",
   "causes": "Faulty heating element; Faulty temperature sensor (NTC thermistor); Damaged wiring or a loose/corroded connector",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); Have a technician test the heating element and temperature sensor; If the code keeps coming back, contact an authorised service technician",
   "source": "https://support.electrolux.co.uk/support-articles/article/electrolux-washing-machine-displays-an-error-code-causes-and-solutions",
   "url": "https://errora.com.tr/en/washer/electrolux/e60/"
  },
  {
   "type": "washer",
   "code": "EF0",
   "brand": "Electrolux / AEG",
   "device": "Washing machine",
   "meaning": "Water leak detected in the base",
   "severity": "High",
   "causes": "Leaking hose, seal or pump; Too much detergent or a non-low-suds detergent; Faulty water level (pressure) sensor or its hose",
   "fixes": "Unplug the machine, close the tap and check underneath for water or leaks; Use less detergent (low-suds / HE type only) and run a drum clean cycle; If the code keeps coming back, contact an authorised service technician",
   "source": "https://support.electrolux.co.uk/support-articles/article/electrolux-washing-machine-displays-an-error-code-causes-and-solutions",
   "url": "https://errora.com.tr/en/washer/electrolux/ef0/"
  },
  {
   "type": "washer",
   "code": "EH0",
   "brand": "Electrolux / AEG",
   "device": "Washing machine",
   "meaning": "Power supply voltage out of range",
   "severity": "Medium",
   "causes": "Unstable mains power or a loose plug/socket",
   "fixes": "Plug directly into a wall socket (no extension lead) and check your power supply; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://support.electrolux.co.uk/support-articles/article/electrolux-washing-machine-displays-an-error-code-causes-and-solutions",
   "url": "https://errora.com.tr/en/washer/electrolux/eh0/"
  },
  {
   "type": "washer",
   "code": "E01",
   "brand": "Beko",
   "device": "Washing machine",
   "meaning": "Door not closed or not locked",
   "severity": "Low",
   "causes": "Laundry caught in the door or door seal; Damaged door latch or door lock; Damaged wiring or a loose/corroded connector",
   "fixes": "Open and firmly close the door, removing anything caught in the seal; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.whitegoodshelp.co.uk/?p=35773",
   "url": "https://errora.com.tr/en/washer/beko/e01/"
  },
  {
   "type": "washer",
   "code": "E02",
   "brand": "Beko",
   "device": "Washing machine",
   "meaning": "Heating fault, water not heating",
   "severity": "Medium",
   "causes": "Faulty heating element; Faulty temperature sensor (NTC thermistor); Damaged wiring or a loose/corroded connector",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); Have a technician test the heating element and temperature sensor; If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.whitegoodshelp.co.uk/?p=35773",
   "url": "https://errora.com.tr/en/washer/beko/e02/"
  },
  {
   "type": "washer",
   "code": "E03",
   "brand": "Beko",
   "device": "Washing machine",
   "meaning": "Water not draining",
   "severity": "Medium",
   "causes": "Clogged drain pump filter; Kinked, blocked or too high drain hose; Faulty drain pump; Too much detergent or a non-low-suds detergent",
   "fixes": "Clean the drain pump filter (usually behind the small flap at the front bottom); Straighten the drain hose and check it isn't blocked or placed too high; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.whitegoodshelp.co.uk/?p=35773",
   "url": "https://errora.com.tr/en/washer/beko/e03/"
  },
  {
   "type": "washer",
   "code": "E04",
   "brand": "Beko",
   "device": "Washing machine",
   "meaning": "Water not filling (water supply problem)",
   "severity": "Medium",
   "causes": "Water tap closed or low water pressure; Kinked inlet hose or clogged inlet filter; Faulty water inlet valve; Faulty control or motor board",
   "fixes": "Make sure the tap is fully open and the water pressure is normal; Straighten the inlet hose and clean the small filter where it connects to the machine; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.whitegoodshelp.co.uk/?p=35773",
   "url": "https://errora.com.tr/en/washer/beko/e04/"
  },
  {
   "type": "washer",
   "code": "E05",
   "brand": "Beko",
   "device": "Washing machine",
   "meaning": "Water level (pressure) sensor fault",
   "severity": "Medium",
   "causes": "Faulty water level (pressure) sensor or its hose; Clogged drain pump filter; Damaged wiring or a loose/corroded connector",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); Clean the drain pump filter (usually behind the small flap at the front bottom); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.whitegoodshelp.co.uk/?p=35773",
   "url": "https://errora.com.tr/en/washer/beko/e05/"
  },
  {
   "type": "washer",
   "code": "E06",
   "brand": "Beko",
   "device": "Washing machine",
   "meaning": "Temperature sensor (thermistor) fault",
   "severity": "Medium",
   "causes": "Faulty temperature sensor (NTC thermistor); Damaged wiring or a loose/corroded connector",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); Have a technician test the heating element and temperature sensor; If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.whitegoodshelp.co.uk/?p=35773",
   "url": "https://errora.com.tr/en/washer/beko/e06/"
  },
  {
   "type": "washer",
   "code": "E07",
   "brand": "Beko",
   "device": "Washing machine",
   "meaning": "Motor fault",
   "severity": "Medium",
   "causes": "Worn motor brushes or faulty motor; Foreign object (coin, underwire) jamming the drum; Faulty control or motor board; Damaged wiring or a loose/corroded connector",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); Check the drum and drain filter for foreign objects; Reduce the load size; If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.whitegoodshelp.co.uk/?p=35773",
   "url": "https://errora.com.tr/en/washer/beko/e07/"
  },
  {
   "type": "washer",
   "code": "E08",
   "brand": "Beko",
   "device": "Washing machine",
   "meaning": "Motor speed (Hall) sensor fault",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Worn motor brushes or faulty motor",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); Inspect the wiring and connectors for damage, corrosion or looseness; If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.whitegoodshelp.co.uk/?p=35773",
   "url": "https://errora.com.tr/en/washer/beko/e08/"
  },
  {
   "type": "washer",
   "code": "E13",
   "brand": "Beko",
   "device": "Washing machine",
   "meaning": "Water leak detected in the base",
   "severity": "High",
   "causes": "Leaking hose, seal or pump; Too much detergent or a non-low-suds detergent; Faulty water level (pressure) sensor or its hose",
   "fixes": "Unplug the machine, close the tap and check underneath for water or leaks; Use less detergent (low-suds / HE type only) and run a drum clean cycle; If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.whitegoodshelp.co.uk/?p=35773",
   "url": "https://errora.com.tr/en/washer/beko/e13/"
  },
  {
   "type": "washer",
   "code": "H1",
   "brand": "Beko",
   "device": "Washing machine",
   "meaning": "Temperature sensor (thermistor) fault",
   "severity": "Medium",
   "causes": "Faulty temperature sensor (NTC thermistor); Damaged wiring or a loose/corroded connector",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); Have a technician test the heating element and temperature sensor; If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.whitegoodshelp.co.uk/?p=35773",
   "url": "https://errora.com.tr/en/washer/beko/h1/"
  },
  {
   "type": "washer",
   "code": "H2",
   "brand": "Beko",
   "device": "Washing machine",
   "meaning": "Heating fault, water not heating",
   "severity": "Medium",
   "causes": "Faulty heating element; Faulty temperature sensor (NTC thermistor); Damaged wiring or a loose/corroded connector",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); Have a technician test the heating element and temperature sensor; If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.whitegoodshelp.co.uk/?p=35773",
   "url": "https://errora.com.tr/en/washer/beko/h2/"
  },
  {
   "type": "washer",
   "code": "H7",
   "brand": "Beko",
   "device": "Washing machine",
   "meaning": "Water level (pressure) sensor fault",
   "severity": "Medium",
   "causes": "Faulty water level (pressure) sensor or its hose; Clogged drain pump filter; Damaged wiring or a loose/corroded connector",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); Clean the drain pump filter (usually behind the small flap at the front bottom); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.whitegoodshelp.co.uk/?p=35773",
   "url": "https://errora.com.tr/en/washer/beko/h7/"
  },
  {
   "type": "washer",
   "code": "H8",
   "brand": "Beko",
   "device": "Washing machine",
   "meaning": "Motor speed (Hall) sensor fault",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Worn motor brushes or faulty motor",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); Inspect the wiring and connectors for damage, corrosion or looseness; If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.whitegoodshelp.co.uk/?p=35773",
   "url": "https://errora.com.tr/en/washer/beko/h8/"
  },
  {
   "type": "washer",
   "code": "E5",
   "brand": "Arçelik",
   "device": "Washing machine",
   "meaning": "Water not draining",
   "severity": "Medium",
   "causes": "Clogged drain pump filter; Kinked, blocked or too high drain hose; Faulty drain pump; Too much detergent or a non-low-suds detergent",
   "fixes": "Clean the drain pump filter (usually behind the small flap at the front bottom); Straighten the drain hose and check it isn't blocked or placed too high; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.arcelik.com.tr/blog/camasir-makinesi-hata-kodlari",
   "url": "https://errora.com.tr/en/washer/arcelik/e5/"
  },
  {
   "type": "washer",
   "code": "E8",
   "brand": "Arçelik",
   "device": "Washing machine",
   "meaning": "Water not filling (water supply problem)",
   "severity": "Medium",
   "causes": "Water tap closed or low water pressure; Kinked inlet hose or clogged inlet filter; Faulty water inlet valve; Faulty control or motor board",
   "fixes": "Make sure the tap is fully open and the water pressure is normal; Straighten the inlet hose and clean the small filter where it connects to the machine; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.arcelik.com.tr/blog/camasir-makinesi-hata-kodlari",
   "url": "https://errora.com.tr/en/washer/arcelik/e8/"
  },
  {
   "type": "washer",
   "code": "E12",
   "brand": "Arçelik",
   "device": "Washing machine",
   "meaning": "Water leak detected in the base",
   "severity": "High",
   "causes": "Leaking hose, seal or pump; Too much detergent or a non-low-suds detergent; Faulty water level (pressure) sensor or its hose",
   "fixes": "Unplug the machine, close the tap and check underneath for water or leaks; Use less detergent (low-suds / HE type only) and run a drum clean cycle; If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.arcelik.com.tr/blog/camasir-makinesi-hata-kodlari",
   "url": "https://errora.com.tr/en/washer/arcelik/e12/"
  },
  {
   "type": "washer",
   "code": "E17",
   "brand": "Arçelik",
   "device": "Washing machine",
   "meaning": "Too much foam (suds) detected",
   "severity": "Low",
   "causes": "Too much detergent or a non-low-suds detergent",
   "fixes": "Use less detergent (low-suds / HE type only) and run a drum clean cycle; Run a drum clean (tub clean) cycle with washing machine cleaner",
   "source": "https://www.arcelik.com.tr/blog/camasir-makinesi-hata-kodlari",
   "url": "https://errora.com.tr/en/washer/arcelik/e17/"
  },
  {
   "type": "washer",
   "code": "E18",
   "brand": "Arçelik",
   "device": "Washing machine",
   "meaning": "Unbalanced load, spin stopped",
   "severity": "Low",
   "causes": "Uneven load or a single heavy item; Transport bolts not removed or machine not level",
   "fixes": "Spread the laundry evenly in the drum and restart; Make sure the machine is level and the transport bolts have been removed; Reduce the load size",
   "source": "https://www.arcelik.com.tr/blog/camasir-makinesi-hata-kodlari",
   "url": "https://errora.com.tr/en/washer/arcelik/e18/"
  },
  {
   "type": "washer",
   "code": "E29",
   "brand": "Arçelik",
   "device": "Washing machine",
   "meaning": "Power supply voltage out of range",
   "severity": "Medium",
   "causes": "Unstable mains power or a loose plug/socket",
   "fixes": "Plug directly into a wall socket (no extension lead) and check your power supply; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.arcelik.com.tr/blog/camasir-makinesi-hata-kodlari",
   "url": "https://errora.com.tr/en/washer/arcelik/e29/"
  },
  {
   "type": "washer",
   "code": "E84",
   "brand": "Arçelik",
   "device": "Washing machine",
   "meaning": "Wi-Fi / network connection error",
   "severity": "Info (not a fault)",
   "causes": "Wi-Fi router or app setup problem",
   "fixes": "Check the Wi-Fi connection and set the machine up again in the app; If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.arcelik.com.tr/blog/camasir-makinesi-hata-kodlari",
   "url": "https://errora.com.tr/en/washer/arcelik/e84/"
  },
  {
   "type": "washer",
   "code": "F8E1",
   "brand": "Whirlpool",
   "device": "Washing machine",
   "meaning": "Water not filling (water supply problem)",
   "severity": "Medium",
   "causes": "Water tap closed or low water pressure; Kinked inlet hose or clogged inlet filter; Faulty water inlet valve; Faulty control or motor board",
   "fixes": "Make sure the tap is fully open and the water pressure is normal; Straighten the inlet hose and clean the small filter where it connects to the machine; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.ifixit.com/Wiki/Whirlpool_Washing_Machine_Error_Codes",
   "url": "https://errora.com.tr/en/washer/whirlpool/f8e1/"
  },
  {
   "type": "washer",
   "code": "F9E1",
   "brand": "Whirlpool",
   "device": "Washing machine",
   "meaning": "Water not draining",
   "severity": "Medium",
   "causes": "Clogged drain pump filter; Kinked, blocked or too high drain hose; Faulty drain pump; Too much detergent or a non-low-suds detergent",
   "fixes": "Clean the drain pump filter (usually behind the small flap at the front bottom); Straighten the drain hose and check it isn't blocked or placed too high; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.ifixit.com/Wiki/Whirlpool_Washing_Machine_Error_Codes",
   "url": "https://errora.com.tr/en/washer/whirlpool/f9e1/"
  },
  {
   "type": "washer",
   "code": "F5E2",
   "brand": "Whirlpool",
   "device": "Washing machine",
   "meaning": "Door not closed or not locked",
   "severity": "Low",
   "causes": "Laundry caught in the door or door seal; Damaged door latch or door lock; Damaged wiring or a loose/corroded connector",
   "fixes": "Open and firmly close the door, removing anything caught in the seal; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.ifixit.com/Wiki/Whirlpool_Washing_Machine_Error_Codes",
   "url": "https://errora.com.tr/en/washer/whirlpool/f5e2/"
  },
  {
   "type": "washer",
   "code": "F7E1",
   "brand": "Whirlpool",
   "device": "Washing machine",
   "meaning": "Motor speed (Hall) sensor fault",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector; Worn motor brushes or faulty motor",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); Inspect the wiring and connectors for damage, corrosion or looseness; If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.ifixit.com/Wiki/Whirlpool_Washing_Machine_Error_Codes",
   "url": "https://errora.com.tr/en/washer/whirlpool/f7e1/"
  },
  {
   "type": "washer",
   "code": "F0E2",
   "brand": "Whirlpool",
   "device": "Washing machine",
   "meaning": "Too much foam (suds) detected",
   "severity": "Low",
   "causes": "Too much detergent or a non-low-suds detergent",
   "fixes": "Use less detergent (low-suds / HE type only) and run a drum clean cycle; Run a drum clean (tub clean) cycle with washing machine cleaner",
   "source": "https://www.ifixit.com/Wiki/Whirlpool_Washing_Machine_Error_Codes",
   "url": "https://errora.com.tr/en/washer/whirlpool/f0e2/"
  },
  {
   "type": "washer",
   "code": "F0E5",
   "brand": "Whirlpool",
   "device": "Washing machine",
   "meaning": "Unbalanced load, spin stopped",
   "severity": "Low",
   "causes": "Uneven load or a single heavy item; Transport bolts not removed or machine not level",
   "fixes": "Spread the laundry evenly in the drum and restart; Make sure the machine is level and the transport bolts have been removed; Reduce the load size",
   "source": "https://www.ifixit.com/Wiki/Whirlpool_Washing_Machine_Error_Codes",
   "url": "https://errora.com.tr/en/washer/whirlpool/f0e5/"
  },
  {
   "type": "washer",
   "code": "F8E2",
   "brand": "Whirlpool",
   "device": "Washing machine",
   "meaning": "Automatic detergent dosing fault",
   "severity": "Low",
   "causes": "Fault in the automatic dosing or dispenser system",
   "fixes": "Add detergent manually to the drawer until the dosing system is repaired; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.ifixit.com/Wiki/Whirlpool_Washing_Machine_Error_Codes",
   "url": "https://errora.com.tr/en/washer/whirlpool/f8e2/"
  },
  {
   "type": "dishwasher",
   "code": "4C",
   "brand": "Samsung",
   "device": "Dishwasher",
   "meaning": "Water not filling (water supply problem)",
   "severity": "Medium",
   "causes": "Water tap closed or low water pressure; Kinked inlet hose or clogged inlet filter; Faulty water inlet valve",
   "fixes": "Make sure the tap is fully open and the water pressure is normal; Straighten the inlet hose and clean the small filter where it connects to the machine; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10004499/",
   "url": "https://errora.com.tr/en/dishwasher/samsung/4c/"
  },
  {
   "type": "dishwasher",
   "code": "5C",
   "brand": "Samsung",
   "device": "Dishwasher",
   "meaning": "Water not draining",
   "severity": "Medium",
   "causes": "Dirty or clogged filter at the bottom of the tub; Kinked, blocked or too high drain hose; Faulty drain pump",
   "fixes": "Remove and rinse the filter at the bottom of the tub, then refit it securely; Straighten the drain hose and check it isn't blocked or placed too high; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10004499/",
   "url": "https://errora.com.tr/en/dishwasher/samsung/5c/"
  },
  {
   "type": "dishwasher",
   "code": "LC",
   "brand": "Samsung",
   "device": "Dishwasher",
   "meaning": "Water leak detected in the base",
   "severity": "High",
   "causes": "Leaking hose, seal or pump; Hand dish soap or too much detergent used; Transport bolts not removed or machine not level",
   "fixes": "Unplug the machine, close the tap and check underneath for water or leaks; Use only dishwasher detergent (never hand dish soap) in the recommended amount; Make sure the machine is level and the transport bolts have been removed; If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10004499/",
   "url": "https://errora.com.tr/en/dishwasher/samsung/lc/"
  },
  {
   "type": "dishwasher",
   "code": "OC",
   "brand": "Samsung",
   "device": "Dishwasher",
   "meaning": "Too much water (overfill)",
   "severity": "High",
   "causes": "Faulty flow meter or water inlet valve; Faulty water level (pressure) sensor or its hose; Faulty control or motor board",
   "fixes": "Unplug the machine, close the tap and check underneath for water or leaks; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10004499/",
   "url": "https://errora.com.tr/en/dishwasher/samsung/oc/"
  },
  {
   "type": "dishwasher",
   "code": "HE",
   "brand": "Samsung",
   "device": "Dishwasher",
   "meaning": "Heating fault, water not heating",
   "severity": "Medium",
   "causes": "Faulty heating element; Faulty temperature sensor (NTC thermistor); Damaged wiring or a loose/corroded connector",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); Have a technician test the heating element and temperature sensor; If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10004499/",
   "url": "https://errora.com.tr/en/dishwasher/samsung/he/"
  },
  {
   "type": "dishwasher",
   "code": "tE",
   "brand": "Samsung",
   "device": "Dishwasher",
   "meaning": "Temperature sensor (thermistor) fault",
   "severity": "Medium",
   "causes": "Faulty temperature sensor (NTC thermistor); Damaged wiring or a loose/corroded connector",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10004499/",
   "url": "https://errora.com.tr/en/dishwasher/samsung/te/"
  },
  {
   "type": "dishwasher",
   "code": "3C",
   "brand": "Samsung",
   "device": "Dishwasher",
   "meaning": "Pump fault",
   "severity": "Medium",
   "causes": "Faulty pump or pump blocked by debris; Dishes blocking the spray arms or pump; Damaged wiring or a loose/corroded connector",
   "fixes": "Rearrange the dishes so nothing blocks the spray arms, then restart; Remove and rinse the filter at the bottom of the tub, then refit it securely; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10004499/",
   "url": "https://errora.com.tr/en/dishwasher/samsung/3c/"
  },
  {
   "type": "dishwasher",
   "code": "3E",
   "brand": "Samsung",
   "device": "Dishwasher",
   "meaning": "Incoming water too hot",
   "severity": "Low",
   "causes": "Appliance connected to water that is too hot",
   "fixes": "Connect the appliance to the cold water supply or lower the inlet water temperature; Unplug the machine for a few minutes, then switch it back on (reset)",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10004499/",
   "url": "https://errora.com.tr/en/dishwasher/samsung/3e/"
  },
  {
   "type": "dishwasher",
   "code": "9E",
   "brand": "Samsung",
   "device": "Dishwasher",
   "meaning": "Not enough water",
   "severity": "Medium",
   "causes": "Water tap closed or low water pressure; Kinked inlet hose or clogged inlet filter; Dirty or clogged filter at the bottom of the tub",
   "fixes": "Make sure the tap is fully open and the water pressure is normal; Straighten the inlet hose and clean the small filter where it connects to the machine; Remove and rinse the filter at the bottom of the tub, then refit it securely; If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10004499/",
   "url": "https://errora.com.tr/en/dishwasher/samsung/9e/"
  },
  {
   "type": "dishwasher",
   "code": "HC",
   "brand": "Samsung",
   "device": "Dishwasher",
   "meaning": "Overheating (safety limit tripped)",
   "severity": "High",
   "causes": "Faulty heating element; Faulty temperature sensor (NTC thermistor); Faulty control or motor board",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10004499/",
   "url": "https://errora.com.tr/en/dishwasher/samsung/hc/"
  },
  {
   "type": "dishwasher",
   "code": "bE",
   "brand": "Samsung",
   "device": "Dishwasher",
   "meaning": "Button stuck or held down",
   "severity": "Low",
   "causes": "A button stuck or pressed for too long",
   "fixes": "Check that no button is stuck and gently clean the control panel; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10004499/",
   "url": "https://errora.com.tr/en/dishwasher/samsung/be/"
  },
  {
   "type": "dishwasher",
   "code": "CE",
   "brand": "Samsung",
   "device": "Dishwasher",
   "meaning": "Communication error between control boards",
   "severity": "Medium",
   "causes": "Faulty control or motor board; Damaged wiring or a loose/corroded connector; Unstable mains power or a loose plug/socket",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10004499/",
   "url": "https://errora.com.tr/en/dishwasher/samsung/ce/"
  },
  {
   "type": "dishwasher",
   "code": "1E",
   "brand": "Samsung",
   "device": "Dishwasher",
   "meaning": "Filter clogged",
   "severity": "Low",
   "causes": "Dirty or clogged filter at the bottom of the tub",
   "fixes": "Remove and rinse the filter at the bottom of the tub, then refit it securely; Unplug the machine for a few minutes, then switch it back on (reset)",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10004499/",
   "url": "https://errora.com.tr/en/dishwasher/samsung/1e/"
  },
  {
   "type": "dishwasher",
   "code": "AE",
   "brand": "LG",
   "device": "Dishwasher",
   "meaning": "Water leak detected in the base",
   "severity": "High",
   "causes": "Leaking hose, seal or pump; Hand dish soap or too much detergent used; Transport bolts not removed or machine not level",
   "fixes": "Unplug the machine, close the tap and check underneath for water or leaks; Use only dishwasher detergent (never hand dish soap) in the recommended amount; Make sure the machine is level and the transport bolts have been removed; If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.lg.com/us/support/help-library/lg-dishwasher-guide-to-error-codes--20154464775480",
   "url": "https://errora.com.tr/en/dishwasher/lg/ae/"
  },
  {
   "type": "dishwasher",
   "code": "IE",
   "brand": "LG",
   "device": "Dishwasher",
   "meaning": "Water not filling (water supply problem)",
   "severity": "Medium",
   "causes": "Water tap closed or low water pressure; Kinked inlet hose or clogged inlet filter; Faulty water inlet valve",
   "fixes": "Make sure the tap is fully open and the water pressure is normal; Straighten the inlet hose and clean the small filter where it connects to the machine; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.lg.com/us/support/help-library/lg-dishwasher-guide-to-error-codes--20154464775480",
   "url": "https://errora.com.tr/en/dishwasher/lg/ie/"
  },
  {
   "type": "dishwasher",
   "code": "OE",
   "brand": "LG",
   "device": "Dishwasher",
   "meaning": "Water not draining",
   "severity": "Medium",
   "causes": "Dirty or clogged filter at the bottom of the tub; Kinked, blocked or too high drain hose; Faulty drain pump",
   "fixes": "Remove and rinse the filter at the bottom of the tub, then refit it securely; Straighten the drain hose and check it isn't blocked or placed too high; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.lg.com/us/support/help-library/lg-dishwasher-guide-to-error-codes--20154464775480",
   "url": "https://errora.com.tr/en/dishwasher/lg/oe/"
  },
  {
   "type": "dishwasher",
   "code": "tE",
   "brand": "LG",
   "device": "Dishwasher",
   "meaning": "Temperature sensor (thermistor) fault",
   "severity": "Medium",
   "causes": "Faulty temperature sensor (NTC thermistor); Damaged wiring or a loose/corroded connector",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.lg.com/us/support/help-library/lg-dishwasher-guide-to-error-codes--20154464775480",
   "url": "https://errora.com.tr/en/dishwasher/lg/te/"
  },
  {
   "type": "dishwasher",
   "code": "HE",
   "brand": "LG",
   "device": "Dishwasher",
   "meaning": "Heating fault, water not heating",
   "severity": "Medium",
   "causes": "Faulty heating element; Faulty temperature sensor (NTC thermistor); Damaged wiring or a loose/corroded connector",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); Have a technician test the heating element and temperature sensor; If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.lg.com/us/support/help-library/lg-dishwasher-guide-to-error-codes--20154464775480",
   "url": "https://errora.com.tr/en/dishwasher/lg/he/"
  },
  {
   "type": "dishwasher",
   "code": "LE",
   "brand": "LG",
   "device": "Dishwasher",
   "meaning": "Wash motor fault",
   "severity": "Medium",
   "causes": "Faulty pump or pump blocked by debris; Faulty control or motor board",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.lg.com/us/support/help-library/lg-dishwasher-guide-to-error-codes--20154464775480",
   "url": "https://errora.com.tr/en/dishwasher/lg/le/"
  },
  {
   "type": "dishwasher",
   "code": "PE",
   "brand": "LG",
   "device": "Dishwasher",
   "meaning": "Water level (pressure) sensor fault",
   "severity": "Medium",
   "causes": "Faulty water level (pressure) sensor or its hose; Damaged wiring or a loose/corroded connector",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.lg.com/us/support/help-library/lg-dishwasher-guide-to-error-codes--20154464775480",
   "url": "https://errora.com.tr/en/dishwasher/lg/pe/"
  },
  {
   "type": "dishwasher",
   "code": "bE",
   "brand": "LG",
   "device": "Dishwasher",
   "meaning": "Too much foam (suds) detected",
   "severity": "Low",
   "causes": "Hand dish soap or too much detergent used",
   "fixes": "Use only dishwasher detergent (never hand dish soap) in the recommended amount; Unplug the machine for a few minutes, then switch it back on (reset)",
   "source": "https://www.lg.com/us/support/help-library/lg-dishwasher-guide-to-error-codes--20154464775480",
   "url": "https://errora.com.tr/en/dishwasher/lg/be/"
  },
  {
   "type": "dishwasher",
   "code": "nE",
   "brand": "LG",
   "device": "Dishwasher",
   "meaning": "Wash pump impeller blocked or not turning",
   "severity": "Low",
   "causes": "Dishes blocking the spray arms or pump; Faulty pump or pump blocked by debris",
   "fixes": "Rearrange the dishes so nothing blocks the spray arms, then restart; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.lg.com/us/support/help-library/lg-dishwasher-guide-to-error-codes--20154464775480",
   "url": "https://errora.com.tr/en/dishwasher/lg/ne/"
  },
  {
   "type": "dishwasher",
   "code": "CL",
   "brand": "LG",
   "device": "Dishwasher",
   "meaning": "Child lock is on",
   "severity": "Info (not a fault)",
   "causes": "The child lock function has been switched on",
   "fixes": "Press and hold the child lock button (or button combination) for about 3 seconds",
   "source": "https://www.lg.com/us/support/help-library/lg-dishwasher-guide-to-error-codes--20154464775480",
   "url": "https://errora.com.tr/en/dishwasher/lg/cl/"
  },
  {
   "type": "dishwasher",
   "code": "E15",
   "brand": "Bosch / Siemens",
   "device": "Dishwasher",
   "meaning": "Water leak detected in the base",
   "severity": "High",
   "causes": "Leaking hose, seal or pump; Hand dish soap or too much detergent used; Transport bolts not removed or machine not level",
   "fixes": "Unplug the machine, close the tap and check underneath for water or leaks; Use only dishwasher detergent (never hand dish soap) in the recommended amount; Make sure the machine is level and the transport bolts have been removed; If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.coolblue.be/en/advice/how-do-i-solve-errors-bosch-siemens-dishwashers.html https://fredsappliance.com/dishwasher-repair/dishwasher-troubleshooting-bosch-error-codes-explained/",
   "url": "https://errora.com.tr/en/dishwasher/bosch/e15/"
  },
  {
   "type": "dishwasher",
   "code": "E24",
   "brand": "Bosch / Siemens",
   "device": "Dishwasher",
   "meaning": "Water not draining",
   "severity": "Medium",
   "causes": "Dirty or clogged filter at the bottom of the tub; Kinked, blocked or too high drain hose; Faulty drain pump",
   "fixes": "Remove and rinse the filter at the bottom of the tub, then refit it securely; Straighten the drain hose and check it isn't blocked or placed too high; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.coolblue.be/en/advice/how-do-i-solve-errors-bosch-siemens-dishwashers.html https://fredsappliance.com/dishwasher-repair/dishwasher-troubleshooting-bosch-error-codes-explained/",
   "url": "https://errora.com.tr/en/dishwasher/bosch/e24/"
  },
  {
   "type": "dishwasher",
   "code": "E22",
   "brand": "Bosch / Siemens",
   "device": "Dishwasher",
   "meaning": "Filter clogged",
   "severity": "Low",
   "causes": "Dirty or clogged filter at the bottom of the tub",
   "fixes": "Remove and rinse the filter at the bottom of the tub, then refit it securely; Unplug the machine for a few minutes, then switch it back on (reset)",
   "source": "https://www.coolblue.be/en/advice/how-do-i-solve-errors-bosch-siemens-dishwashers.html https://fredsappliance.com/dishwasher-repair/dishwasher-troubleshooting-bosch-error-codes-explained/",
   "url": "https://errora.com.tr/en/dishwasher/bosch/e22/"
  },
  {
   "type": "dishwasher",
   "code": "E17",
   "brand": "Bosch / Siemens",
   "device": "Dishwasher",
   "meaning": "Water not filling (water supply problem)",
   "severity": "Medium",
   "causes": "Water tap closed or low water pressure; Kinked inlet hose or clogged inlet filter; Faulty water inlet valve",
   "fixes": "Make sure the tap is fully open and the water pressure is normal; Straighten the inlet hose and clean the small filter where it connects to the machine; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.coolblue.be/en/advice/how-do-i-solve-errors-bosch-siemens-dishwashers.html https://fredsappliance.com/dishwasher-repair/dishwasher-troubleshooting-bosch-error-codes-explained/",
   "url": "https://errora.com.tr/en/dishwasher/bosch/e17/"
  },
  {
   "type": "dishwasher",
   "code": "E09",
   "brand": "Bosch / Siemens",
   "device": "Dishwasher",
   "meaning": "Heating fault, water not heating",
   "severity": "Medium",
   "causes": "Faulty heating element; Faulty temperature sensor (NTC thermistor); Damaged wiring or a loose/corroded connector",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); Have a technician test the heating element and temperature sensor; If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.coolblue.be/en/advice/how-do-i-solve-errors-bosch-siemens-dishwashers.html https://fredsappliance.com/dishwasher-repair/dishwasher-troubleshooting-bosch-error-codes-explained/",
   "url": "https://errora.com.tr/en/dishwasher/bosch/e09/"
  },
  {
   "type": "dishwasher",
   "code": "E27",
   "brand": "Bosch / Siemens",
   "device": "Dishwasher",
   "meaning": "Power supply voltage out of range",
   "severity": "Medium",
   "causes": "Unstable mains power or a loose plug/socket",
   "fixes": "Plug directly into a wall socket (no extension lead) and check your power supply; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.coolblue.be/en/advice/how-do-i-solve-errors-bosch-siemens-dishwashers.html https://fredsappliance.com/dishwasher-repair/dishwasher-troubleshooting-bosch-error-codes-explained/",
   "url": "https://errora.com.tr/en/dishwasher/bosch/e27/"
  },
  {
   "type": "dishwasher",
   "code": "E01",
   "brand": "Bosch / Siemens",
   "device": "Dishwasher",
   "meaning": "Control system error",
   "severity": "Medium",
   "causes": "Faulty control or motor board; Unstable mains power or a loose plug/socket",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.coolblue.be/en/advice/how-do-i-solve-errors-bosch-siemens-dishwashers.html https://fredsappliance.com/dishwasher-repair/dishwasher-troubleshooting-bosch-error-codes-explained/",
   "url": "https://errora.com.tr/en/dishwasher/bosch/e01/"
  },
  {
   "type": "dishwasher",
   "code": "E01",
   "brand": "Arçelik",
   "device": "Dishwasher",
   "meaning": "Too much water (overfill)",
   "severity": "High",
   "causes": "Faulty flow meter or water inlet valve; Faulty water level (pressure) sensor or its hose; Faulty control or motor board",
   "fixes": "Unplug the machine, close the tap and check underneath for water or leaks; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.arcelik.com.tr/blog/bulasik-makinesi-hata-kodlari",
   "url": "https://errora.com.tr/en/dishwasher/arcelik/e01/"
  },
  {
   "type": "dishwasher",
   "code": "E02",
   "brand": "Arçelik",
   "device": "Dishwasher",
   "meaning": "Water not filling (water supply problem)",
   "severity": "Medium",
   "causes": "Water tap closed or low water pressure; Kinked inlet hose or clogged inlet filter; Faulty water inlet valve",
   "fixes": "Make sure the tap is fully open and the water pressure is normal; Straighten the inlet hose and clean the small filter where it connects to the machine; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.arcelik.com.tr/blog/bulasik-makinesi-hata-kodlari",
   "url": "https://errora.com.tr/en/dishwasher/arcelik/e02/"
  },
  {
   "type": "dishwasher",
   "code": "E06",
   "brand": "Arçelik",
   "device": "Dishwasher",
   "meaning": "Temperature sensor (thermistor) fault",
   "severity": "Medium",
   "causes": "Faulty temperature sensor (NTC thermistor); Damaged wiring or a loose/corroded connector",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.arcelik.com.tr/blog/bulasik-makinesi-hata-kodlari",
   "url": "https://errora.com.tr/en/dishwasher/arcelik/e06/"
  },
  {
   "type": "dishwasher",
   "code": "E07",
   "brand": "Arçelik",
   "device": "Dishwasher",
   "meaning": "Too much water (overfill)",
   "severity": "High",
   "causes": "Faulty flow meter or water inlet valve; Faulty water level (pressure) sensor or its hose; Faulty control or motor board",
   "fixes": "Unplug the machine, close the tap and check underneath for water or leaks; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.arcelik.com.tr/blog/bulasik-makinesi-hata-kodlari",
   "url": "https://errora.com.tr/en/dishwasher/arcelik/e07/"
  },
  {
   "type": "dishwasher",
   "code": "E26",
   "brand": "Arçelik",
   "device": "Dishwasher",
   "meaning": "Heat pump compressor fault",
   "severity": "Medium",
   "causes": "Compressor or compressor drive (inverter) fault; Refrigerant leak or incorrect refrigerant charge",
   "fixes": "Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician",
   "source": "https://www.arcelik.com.tr/blog/bulasik-makinesi-hata-kodlari",
   "url": "https://errora.com.tr/en/dishwasher/arcelik/e26/"
  },
  {
   "type": "boiler",
   "code": "F.22",
   "brand": "Vaillant",
   "device": "Boiler",
   "meaning": "Water pressure too low",
   "severity": "Low",
   "causes": "Water leak in the heating system or pressure not topped up; Faulty pressure relief valve or expansion vessel",
   "fixes": "Top up the pressure to about 1–1.5 bar with the filling loop or tap (see your manual); Check radiators, valves and pipes for leaks; if the pressure keeps dropping, call an engineer; Press the boiler's reset button once and wait for it to restart",
   "source": "https://heatable.co.uk/boiler-advice/vaillant-boiler-error-codes",
   "url": "https://errora.com.tr/en/boiler/vaillant/f22/"
  },
  {
   "type": "boiler",
   "code": "F.28",
   "brand": "Vaillant",
   "device": "Boiler",
   "meaning": "Ignition failure, no flame detected",
   "severity": "Medium",
   "causes": "Gas supply off or interrupted (closed valve, prepayment meter out of credit); Frozen or blocked condensate pipe; Faulty or dirty ignition / flame sensing electrode; Faulty gas valve",
   "fixes": "Check the gas supply is on: gas valve open, meter has credit and other gas appliances work; Thaw a frozen condensate pipe with warm (not boiling) water, then reset the boiler; Press the boiler's reset button once and wait for it to restart; Don't keep resetting: if the code returns, switch off and call a qualified gas engineer; If you smell gas: don't use switches, open windows, close the gas valve and call the gas emergency line",
   "source": "https://heatable.co.uk/boiler-advice/vaillant-boiler-error-codes",
   "url": "https://errora.com.tr/en/boiler/vaillant/f28/"
  },
  {
   "type": "boiler",
   "code": "F.29",
   "brand": "Vaillant",
   "device": "Boiler",
   "meaning": "Flame lost during operation",
   "severity": "Medium",
   "causes": "Gas supply off or interrupted (closed valve, prepayment meter out of credit); Faulty or dirty ignition / flame sensing electrode; Blocked or damaged flue; Frozen or blocked condensate pipe",
   "fixes": "Check the gas supply is on: gas valve open, meter has credit and other gas appliances work; Make sure the flue outlet outside isn't blocked (leaves, snow, nests); Press the boiler's reset button once and wait for it to restart; Don't keep resetting: if the code returns, switch off and call a qualified gas engineer",
   "source": "https://heatable.co.uk/boiler-advice/vaillant-boiler-error-codes",
   "url": "https://errora.com.tr/en/boiler/vaillant/f29/"
  },
  {
   "type": "boiler",
   "code": "F.25",
   "brand": "Vaillant",
   "device": "Boiler",
   "meaning": "Flue (exhaust) fault",
   "severity": "High",
   "causes": "Blocked or damaged flue; Faulty fan motor or fan wiring",
   "fixes": "Make sure the flue outlet outside isn't blocked (leaves, snow, nests); Have a qualified gas engineer inspect the boiler; never open gas or flue parts yourself",
   "source": "https://heatable.co.uk/boiler-advice/vaillant-boiler-error-codes",
   "url": "https://errora.com.tr/en/boiler/vaillant/f25/"
  },
  {
   "type": "boiler",
   "code": "F.32",
   "brand": "Vaillant",
   "device": "Boiler",
   "meaning": "Fan fault",
   "severity": "Medium",
   "causes": "Faulty fan motor or fan wiring; Damaged wiring or a loose/corroded connector; Blocked or damaged flue",
   "fixes": "Press the boiler's reset button once and wait for it to restart; Have a qualified gas engineer inspect the boiler; never open gas or flue parts yourself",
   "source": "https://heatable.co.uk/boiler-advice/vaillant-boiler-error-codes",
   "url": "https://errora.com.tr/en/boiler/vaillant/f32/"
  },
  {
   "type": "boiler",
   "code": "F.61",
   "brand": "Vaillant",
   "device": "Boiler",
   "meaning": "Gas valve fault",
   "severity": "High",
   "causes": "Faulty gas valve; Damaged wiring or a loose/corroded connector; Faulty control or motor board",
   "fixes": "If you smell gas: don't use switches, open windows, close the gas valve and call the gas emergency line; Have a qualified gas engineer inspect the boiler; never open gas or flue parts yourself",
   "source": "https://heatable.co.uk/boiler-advice/vaillant-boiler-error-codes",
   "url": "https://errora.com.tr/en/boiler/vaillant/f61/"
  },
  {
   "type": "boiler",
   "code": "F.64",
   "brand": "Vaillant",
   "device": "Boiler",
   "meaning": "Control system error",
   "severity": "Medium",
   "causes": "Faulty control or motor board; Unstable mains power or a loose plug/socket",
   "fixes": "Press the boiler's reset button once and wait for it to restart; Have a qualified gas engineer inspect the boiler; never open gas or flue parts yourself",
   "source": "https://heatable.co.uk/boiler-advice/vaillant-boiler-error-codes",
   "url": "https://errora.com.tr/en/boiler/vaillant/f64/"
  },
  {
   "type": "boiler",
   "code": "F.73",
   "brand": "Vaillant",
   "device": "Boiler",
   "meaning": "Water level (pressure) sensor fault",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Water leak in the heating system or pressure not topped up; Damaged wiring or a loose/corroded connector",
   "fixes": "Top up the pressure to about 1–1.5 bar with the filling loop or tap (see your manual); Have a qualified gas engineer inspect the boiler; never open gas or flue parts yourself",
   "source": "https://heatable.co.uk/boiler-advice/vaillant-boiler-error-codes",
   "url": "https://errora.com.tr/en/boiler/vaillant/f73/"
  },
  {
   "type": "boiler",
   "code": "F.10",
   "brand": "Vaillant",
   "device": "Boiler",
   "meaning": "Temperature sensor (thermistor) fault",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector",
   "fixes": "Press the boiler's reset button once and wait for it to restart; Have a qualified gas engineer inspect the boiler; never open gas or flue parts yourself",
   "source": "https://heatable.co.uk/boiler-advice/vaillant-boiler-error-codes",
   "url": "https://errora.com.tr/en/boiler/vaillant/f10/"
  },
  {
   "type": "boiler",
   "code": "F.89",
   "brand": "Vaillant",
   "device": "Boiler",
   "meaning": "Pump fault",
   "severity": "Medium",
   "causes": "Faulty pump or pump blocked by debris; Air in the system or blocked circulation (closed valves, sludge)",
   "fixes": "Bleed the radiators to release trapped air, then re-check the pressure; Top up the pressure to about 1–1.5 bar with the filling loop or tap (see your manual); Have a qualified gas engineer inspect the boiler; never open gas or flue parts yourself",
   "source": "https://heatable.co.uk/boiler-advice/vaillant-boiler-error-codes",
   "url": "https://errora.com.tr/en/boiler/vaillant/f89/"
  },
  {
   "type": "boiler",
   "code": "F22",
   "brand": "Glow-worm",
   "device": "Boiler",
   "meaning": "Water pressure too low",
   "severity": "Low",
   "causes": "Water leak in the heating system or pressure not topped up; Faulty pressure relief valve or expansion vessel",
   "fixes": "Top up the pressure to about 1–1.5 bar with the filling loop or tap (see your manual); Check radiators, valves and pipes for leaks; if the pressure keeps dropping, call an engineer; Press the boiler's reset button once and wait for it to restart",
   "source": "https://www.glow-worm.co.uk/homeowner/advice-knowledge/boiler-fault-codes-and-what-to-do-if-they-occur-2802216.html",
   "url": "https://errora.com.tr/en/boiler/glowworm/f22/"
  },
  {
   "type": "boiler",
   "code": "F28",
   "brand": "Glow-worm",
   "device": "Boiler",
   "meaning": "No ignition: gas supply problem or frozen condensate pipe",
   "severity": "Medium",
   "causes": "Gas supply off or interrupted (closed valve, prepayment meter out of credit); Frozen or blocked condensate pipe",
   "fixes": "Check the gas supply is on: gas valve open, meter has credit and other gas appliances work; Thaw a frozen condensate pipe with warm (not boiling) water, then reset the boiler; Press the boiler's reset button once and wait for it to restart; Don't keep resetting: if the code returns, switch off and call a qualified gas engineer",
   "source": "https://www.glow-worm.co.uk/homeowner/advice-knowledge/boiler-fault-codes-and-what-to-do-if-they-occur-2802216.html",
   "url": "https://errora.com.tr/en/boiler/glowworm/f28/"
  },
  {
   "type": "boiler",
   "code": "F61",
   "brand": "Glow-worm",
   "device": "Boiler",
   "meaning": "Control system error",
   "severity": "Medium",
   "causes": "Faulty control or motor board; Unstable mains power or a loose plug/socket",
   "fixes": "Press the boiler's reset button once and wait for it to restart; Have a qualified gas engineer inspect the boiler; never open gas or flue parts yourself",
   "source": "https://www.glow-worm.co.uk/homeowner/advice-knowledge/boiler-fault-codes-and-what-to-do-if-they-occur-2802216.html",
   "url": "https://errora.com.tr/en/boiler/glowworm/f61/"
  },
  {
   "type": "boiler",
   "code": "EA 227",
   "brand": "Worcester Bosch",
   "device": "Boiler",
   "meaning": "Ignition failure, no flame detected",
   "severity": "Medium",
   "causes": "Gas supply off or interrupted (closed valve, prepayment meter out of credit); Frozen or blocked condensate pipe; Faulty or dirty ignition / flame sensing electrode; Faulty gas valve",
   "fixes": "Check the gas supply is on: gas valve open, meter has credit and other gas appliances work; Thaw a frozen condensate pipe with warm (not boiling) water, then reset the boiler; Press the boiler's reset button once and wait for it to restart; Don't keep resetting: if the code returns, switch off and call a qualified gas engineer; If you smell gas: don't use switches, open windows, close the gas valve and call the gas emergency line",
   "source": "https://heatable.co.uk/boiler-advice/worcester-bosch-error-codes",
   "url": "https://errora.com.tr/en/boiler/worcester/ea-227/"
  },
  {
   "type": "boiler",
   "code": "E9 224",
   "brand": "Worcester Bosch",
   "device": "Boiler",
   "meaning": "Overheating (safety limit tripped)",
   "severity": "High",
   "causes": "Low water flow or blocked heat exchanger; Air in the system or blocked circulation (closed valves, sludge); Faulty pump or pump blocked by debris",
   "fixes": "Make sure the radiator and boiler valves are open; Top up the pressure to about 1–1.5 bar with the filling loop or tap (see your manual); Press the boiler's reset button once and wait for it to restart; Don't keep resetting: if the code returns, switch off and call a qualified gas engineer",
   "source": "https://heatable.co.uk/boiler-advice/worcester-bosch-error-codes",
   "url": "https://errora.com.tr/en/boiler/worcester/e9-224/"
  },
  {
   "type": "boiler",
   "code": "A1 281",
   "brand": "Worcester Bosch",
   "device": "Boiler",
   "meaning": "Pump fault",
   "severity": "Medium",
   "causes": "Faulty pump or pump blocked by debris; Air in the system or blocked circulation (closed valves, sludge)",
   "fixes": "Bleed the radiators to release trapped air, then re-check the pressure; Top up the pressure to about 1–1.5 bar with the filling loop or tap (see your manual); Have a qualified gas engineer inspect the boiler; never open gas or flue parts yourself",
   "source": "https://heatable.co.uk/boiler-advice/worcester-bosch-error-codes",
   "url": "https://errora.com.tr/en/boiler/worcester/a1-281/"
  },
  {
   "type": "boiler",
   "code": "C6 215",
   "brand": "Worcester Bosch",
   "device": "Boiler",
   "meaning": "Fan fault",
   "severity": "Medium",
   "causes": "Faulty fan motor or fan wiring; Damaged wiring or a loose/corroded connector; Blocked or damaged flue",
   "fixes": "Press the boiler's reset button once and wait for it to restart; Have a qualified gas engineer inspect the boiler; never open gas or flue parts yourself",
   "source": "https://heatable.co.uk/boiler-advice/worcester-bosch-error-codes",
   "url": "https://errora.com.tr/en/boiler/worcester/c6-215/"
  },
  {
   "type": "boiler",
   "code": "D1 240",
   "brand": "Worcester Bosch",
   "device": "Boiler",
   "meaning": "Temperature sensor (thermistor) fault",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector",
   "fixes": "Press the boiler's reset button once and wait for it to restart; Have a qualified gas engineer inspect the boiler; never open gas or flue parts yourself",
   "source": "https://heatable.co.uk/boiler-advice/worcester-bosch-error-codes",
   "url": "https://errora.com.tr/en/boiler/worcester/d1-240/"
  },
  {
   "type": "boiler",
   "code": "E2 222",
   "brand": "Worcester Bosch",
   "device": "Boiler",
   "meaning": "Temperature sensor (thermistor) fault",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector",
   "fixes": "Press the boiler's reset button once and wait for it to restart; Have a qualified gas engineer inspect the boiler; never open gas or flue parts yourself",
   "source": "https://heatable.co.uk/boiler-advice/worcester-bosch-error-codes",
   "url": "https://errora.com.tr/en/boiler/worcester/e2-222/"
  },
  {
   "type": "boiler",
   "code": "F7 228",
   "brand": "Worcester Bosch",
   "device": "Boiler",
   "meaning": "False flame detected",
   "severity": "High",
   "causes": "Faulty or dirty ignition / flame sensing electrode; Faulty gas valve; Faulty control or motor board",
   "fixes": "Have a qualified gas engineer inspect the boiler; never open gas or flue parts yourself; If you smell gas: don't use switches, open windows, close the gas valve and call the gas emergency line",
   "source": "https://heatable.co.uk/boiler-advice/worcester-bosch-error-codes",
   "url": "https://errora.com.tr/en/boiler/worcester/f7-228/"
  },
  {
   "type": "boiler",
   "code": "FA 306",
   "brand": "Worcester Bosch",
   "device": "Boiler",
   "meaning": "False flame detected",
   "severity": "High",
   "causes": "Faulty or dirty ignition / flame sensing electrode; Faulty gas valve; Faulty control or motor board",
   "fixes": "Have a qualified gas engineer inspect the boiler; never open gas or flue parts yourself; If you smell gas: don't use switches, open windows, close the gas valve and call the gas emergency line",
   "source": "https://heatable.co.uk/boiler-advice/worcester-bosch-error-codes",
   "url": "https://errora.com.tr/en/boiler/worcester/fa-306/"
  },
  {
   "type": "boiler",
   "code": "FD 231",
   "brand": "Worcester Bosch",
   "device": "Boiler",
   "meaning": "Power supply interrupted",
   "severity": "Low",
   "causes": "Unstable mains power or a loose plug/socket",
   "fixes": "Plug directly into a wall socket (no extension lead) and check your power supply; Press the boiler's reset button once and wait for it to restart",
   "source": "https://heatable.co.uk/boiler-advice/worcester-bosch-error-codes",
   "url": "https://errora.com.tr/en/boiler/worcester/fd-231/"
  },
  {
   "type": "boiler",
   "code": "1017",
   "brand": "Worcester Bosch",
   "device": "Boiler",
   "meaning": "Water pressure too low",
   "severity": "Low",
   "causes": "Water leak in the heating system or pressure not topped up; Faulty pressure relief valve or expansion vessel",
   "fixes": "Top up the pressure to about 1–1.5 bar with the filling loop or tap (see your manual); Check radiators, valves and pipes for leaks; if the pressure keeps dropping, call an engineer; Press the boiler's reset button once and wait for it to restart",
   "source": "https://heatable.co.uk/boiler-advice/worcester-bosch-error-codes",
   "url": "https://errora.com.tr/en/boiler/worcester/1017/"
  },
  {
   "type": "boiler",
   "code": "E133",
   "brand": "Baxi",
   "device": "Boiler",
   "meaning": "Ignition failure, no flame detected",
   "severity": "Medium",
   "causes": "Gas supply off or interrupted (closed valve, prepayment meter out of credit); Frozen or blocked condensate pipe; Faulty or dirty ignition / flame sensing electrode; Faulty gas valve",
   "fixes": "Check the gas supply is on: gas valve open, meter has credit and other gas appliances work; Thaw a frozen condensate pipe with warm (not boiling) water, then reset the boiler; Press the boiler's reset button once and wait for it to restart; Don't keep resetting: if the code returns, switch off and call a qualified gas engineer; If you smell gas: don't use switches, open windows, close the gas valve and call the gas emergency line",
   "source": "https://heatable.co.uk/boiler-advice/baxi-boiler-troubleshooting",
   "url": "https://errora.com.tr/en/boiler/baxi/e133/"
  },
  {
   "type": "boiler",
   "code": "E118",
   "brand": "Baxi",
   "device": "Boiler",
   "meaning": "Water pressure too low",
   "severity": "Low",
   "causes": "Water leak in the heating system or pressure not topped up; Faulty pressure relief valve or expansion vessel",
   "fixes": "Top up the pressure to about 1–1.5 bar with the filling loop or tap (see your manual); Check radiators, valves and pipes for leaks; if the pressure keeps dropping, call an engineer; Press the boiler's reset button once and wait for it to restart",
   "source": "https://heatable.co.uk/boiler-advice/baxi-boiler-troubleshooting",
   "url": "https://errora.com.tr/en/boiler/baxi/e118/"
  },
  {
   "type": "boiler",
   "code": "E117",
   "brand": "Baxi",
   "device": "Boiler",
   "meaning": "Water pressure too high",
   "severity": "Medium",
   "causes": "Faulty pressure relief valve or expansion vessel; System overfilled when topping up the pressure",
   "fixes": "Bleed the radiators to release trapped air, then re-check the pressure; Have a qualified gas engineer inspect the boiler; never open gas or flue parts yourself",
   "source": "https://heatable.co.uk/boiler-advice/baxi-boiler-troubleshooting",
   "url": "https://errora.com.tr/en/boiler/baxi/e117/"
  },
  {
   "type": "boiler",
   "code": "E110",
   "brand": "Baxi",
   "device": "Boiler",
   "meaning": "Overheating (safety limit tripped)",
   "severity": "High",
   "causes": "Low water flow or blocked heat exchanger; Air in the system or blocked circulation (closed valves, sludge); Faulty pump or pump blocked by debris",
   "fixes": "Make sure the radiator and boiler valves are open; Top up the pressure to about 1–1.5 bar with the filling loop or tap (see your manual); Press the boiler's reset button once and wait for it to restart; Don't keep resetting: if the code returns, switch off and call a qualified gas engineer",
   "source": "https://heatable.co.uk/boiler-advice/baxi-boiler-troubleshooting",
   "url": "https://errora.com.tr/en/boiler/baxi/e110/"
  },
  {
   "type": "boiler",
   "code": "E125",
   "brand": "Baxi",
   "device": "Boiler",
   "meaning": "Water circulation fault",
   "severity": "Medium",
   "causes": "Air in the system or blocked circulation (closed valves, sludge); Faulty pump or pump blocked by debris; Water leak in the heating system or pressure not topped up",
   "fixes": "Make sure the radiator and boiler valves are open; Bleed the radiators to release trapped air, then re-check the pressure; Top up the pressure to about 1–1.5 bar with the filling loop or tap (see your manual); Have a qualified gas engineer inspect the boiler; never open gas or flue parts yourself",
   "source": "https://heatable.co.uk/boiler-advice/baxi-boiler-troubleshooting",
   "url": "https://errora.com.tr/en/boiler/baxi/e125/"
  },
  {
   "type": "boiler",
   "code": "E160",
   "brand": "Baxi",
   "device": "Boiler",
   "meaning": "Fan fault",
   "severity": "Medium",
   "causes": "Faulty fan motor or fan wiring; Damaged wiring or a loose/corroded connector; Blocked or damaged flue",
   "fixes": "Press the boiler's reset button once and wait for it to restart; Have a qualified gas engineer inspect the boiler; never open gas or flue parts yourself",
   "source": "https://heatable.co.uk/boiler-advice/baxi-boiler-troubleshooting",
   "url": "https://errora.com.tr/en/boiler/baxi/e160/"
  },
  {
   "type": "boiler",
   "code": "E28",
   "brand": "Baxi",
   "device": "Boiler",
   "meaning": "Flue (exhaust) fault",
   "severity": "High",
   "causes": "Blocked or damaged flue; Faulty fan motor or fan wiring",
   "fixes": "Make sure the flue outlet outside isn't blocked (leaves, snow, nests); Have a qualified gas engineer inspect the boiler; never open gas or flue parts yourself",
   "source": "https://heatable.co.uk/boiler-advice/baxi-boiler-troubleshooting",
   "url": "https://errora.com.tr/en/boiler/baxi/e28/"
  },
  {
   "type": "boiler",
   "code": "E20",
   "brand": "Baxi",
   "device": "Boiler",
   "meaning": "Temperature sensor (thermistor) fault",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector",
   "fixes": "Press the boiler's reset button once and wait for it to restart; Have a qualified gas engineer inspect the boiler; never open gas or flue parts yourself",
   "source": "https://heatable.co.uk/boiler-advice/baxi-boiler-troubleshooting",
   "url": "https://errora.com.tr/en/boiler/baxi/e20/"
  },
  {
   "type": "boiler",
   "code": "E384",
   "brand": "Baxi",
   "device": "Boiler",
   "meaning": "False flame detected",
   "severity": "High",
   "causes": "Faulty or dirty ignition / flame sensing electrode; Faulty gas valve; Faulty control or motor board",
   "fixes": "Have a qualified gas engineer inspect the boiler; never open gas or flue parts yourself; If you smell gas: don't use switches, open windows, close the gas valve and call the gas emergency line",
   "source": "https://heatable.co.uk/boiler-advice/baxi-boiler-troubleshooting",
   "url": "https://errora.com.tr/en/boiler/baxi/e384/"
  },
  {
   "type": "boiler",
   "code": "E15",
   "brand": "Baxi",
   "device": "Boiler",
   "meaning": "Gas valve fault",
   "severity": "High",
   "causes": "Faulty gas valve; Damaged wiring or a loose/corroded connector; Faulty control or motor board",
   "fixes": "If you smell gas: don't use switches, open windows, close the gas valve and call the gas emergency line; Have a qualified gas engineer inspect the boiler; never open gas or flue parts yourself",
   "source": "https://heatable.co.uk/boiler-advice/baxi-boiler-troubleshooting",
   "url": "https://errora.com.tr/en/boiler/baxi/e15/"
  },
  {
   "type": "boiler",
   "code": "E01",
   "brand": "Arçelik",
   "device": "Boiler",
   "meaning": "Ignition failure, no flame detected",
   "severity": "Medium",
   "causes": "Gas supply off or interrupted (closed valve, prepayment meter out of credit); Frozen or blocked condensate pipe; Faulty or dirty ignition / flame sensing electrode; Faulty gas valve",
   "fixes": "Check the gas supply is on: gas valve open, meter has credit and other gas appliances work; Thaw a frozen condensate pipe with warm (not boiling) water, then reset the boiler; Press the boiler's reset button once and wait for it to restart; Don't keep resetting: if the code returns, switch off and call a qualified gas engineer; If you smell gas: don't use switches, open windows, close the gas valve and call the gas emergency line",
   "source": "https://www.arcelik.com.tr/blog/kombi-hata-kodlari",
   "url": "https://errora.com.tr/en/boiler/arcelik/e01/"
  },
  {
   "type": "boiler",
   "code": "E02",
   "brand": "Arçelik",
   "device": "Boiler",
   "meaning": "Overheating (safety limit tripped)",
   "severity": "High",
   "causes": "Low water flow or blocked heat exchanger; Air in the system or blocked circulation (closed valves, sludge); Faulty pump or pump blocked by debris",
   "fixes": "Make sure the radiator and boiler valves are open; Top up the pressure to about 1–1.5 bar with the filling loop or tap (see your manual); Press the boiler's reset button once and wait for it to restart; Don't keep resetting: if the code returns, switch off and call a qualified gas engineer",
   "source": "https://www.arcelik.com.tr/blog/kombi-hata-kodlari",
   "url": "https://errora.com.tr/en/boiler/arcelik/e02/"
  },
  {
   "type": "boiler",
   "code": "E03",
   "brand": "Arçelik",
   "device": "Boiler",
   "meaning": "Flue (exhaust) fault",
   "severity": "High",
   "causes": "Blocked or damaged flue; Faulty fan motor or fan wiring",
   "fixes": "Make sure the flue outlet outside isn't blocked (leaves, snow, nests); Have a qualified gas engineer inspect the boiler; never open gas or flue parts yourself",
   "source": "https://www.arcelik.com.tr/blog/kombi-hata-kodlari",
   "url": "https://errora.com.tr/en/boiler/arcelik/e03/"
  },
  {
   "type": "boiler",
   "code": "E04",
   "brand": "Arçelik",
   "device": "Boiler",
   "meaning": "Water pressure too low",
   "severity": "Low",
   "causes": "Water leak in the heating system or pressure not topped up; Faulty pressure relief valve or expansion vessel",
   "fixes": "Top up the pressure to about 1–1.5 bar with the filling loop or tap (see your manual); Check radiators, valves and pipes for leaks; if the pressure keeps dropping, call an engineer; Press the boiler's reset button once and wait for it to restart",
   "source": "https://www.arcelik.com.tr/blog/kombi-hata-kodlari",
   "url": "https://errora.com.tr/en/boiler/arcelik/e04/"
  },
  {
   "type": "boiler",
   "code": "E16",
   "brand": "Arçelik",
   "device": "Boiler",
   "meaning": "Fan fault",
   "severity": "Medium",
   "causes": "Faulty fan motor or fan wiring; Damaged wiring or a loose/corroded connector; Blocked or damaged flue",
   "fixes": "Press the boiler's reset button once and wait for it to restart; Have a qualified gas engineer inspect the boiler; never open gas or flue parts yourself",
   "source": "https://www.arcelik.com.tr/blog/kombi-hata-kodlari",
   "url": "https://errora.com.tr/en/boiler/arcelik/e16/"
  },
  {
   "type": "boiler",
   "code": "E22",
   "brand": "Arçelik",
   "device": "Boiler",
   "meaning": "Control system error",
   "severity": "Medium",
   "causes": "Faulty control or motor board; Unstable mains power or a loose plug/socket",
   "fixes": "Press the boiler's reset button once and wait for it to restart; Have a qualified gas engineer inspect the boiler; never open gas or flue parts yourself",
   "source": "https://www.arcelik.com.tr/blog/kombi-hata-kodlari",
   "url": "https://errora.com.tr/en/boiler/arcelik/e22/"
  },
  {
   "type": "boiler",
   "code": "E31",
   "brand": "Arçelik",
   "device": "Boiler",
   "meaning": "Remote control / thermostat error",
   "severity": "Low",
   "causes": "Flat batteries or connection problem in the remote control / thermostat; Damaged wiring or a loose/corroded connector",
   "fixes": "Replace the remote control / thermostat batteries and check its connection; Press the boiler's reset button once and wait for it to restart",
   "source": "https://www.arcelik.com.tr/blog/kombi-hata-kodlari",
   "url": "https://errora.com.tr/en/boiler/arcelik/e31/"
  },
  {
   "type": "boiler",
   "code": "E98",
   "brand": "Arçelik",
   "device": "Boiler",
   "meaning": "Power supply voltage out of range",
   "severity": "Low",
   "causes": "Unstable mains power or a loose plug/socket",
   "fixes": "Plug directly into a wall socket (no extension lead) and check your power supply; Press the boiler's reset button once and wait for it to restart",
   "source": "https://www.arcelik.com.tr/blog/kombi-hata-kodlari",
   "url": "https://errora.com.tr/en/boiler/arcelik/e98/"
  },
  {
   "type": "boiler",
   "code": "E99",
   "brand": "Arçelik",
   "device": "Boiler",
   "meaning": "Safety lockout",
   "severity": "High",
   "causes": "Faulty control or motor board; Faulty sensor or component; Faulty gas valve",
   "fixes": "Don't keep resetting: if the code returns, switch off and call a qualified gas engineer; Have a qualified gas engineer inspect the boiler; never open gas or flue parts yourself",
   "source": "https://www.arcelik.com.tr/blog/kombi-hata-kodlari",
   "url": "https://errora.com.tr/en/boiler/arcelik/e99/"
  },
  {
   "type": "ac",
   "code": "CH01",
   "brand": "Arçelik",
   "device": "Air conditioner",
   "meaning": "Temperature sensor (thermistor) fault",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector",
   "fixes": "Switch the unit off at the breaker for about 5 minutes, then switch it back on; If the code returns, contact an authorised AC technician; don't open the unit yourself",
   "source": "https://www.arcelik.com.tr/blog/klima-hata-kodlari",
   "url": "https://errora.com.tr/en/ac/arcelik/ch01/"
  },
  {
   "type": "ac",
   "code": "CH02",
   "brand": "Arçelik",
   "device": "Air conditioner",
   "meaning": "Pipe (coil) temperature sensor fault",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector",
   "fixes": "Switch the unit off at the breaker for about 5 minutes, then switch it back on; If the code returns, contact an authorised AC technician; don't open the unit yourself",
   "source": "https://www.arcelik.com.tr/blog/klima-hata-kodlari",
   "url": "https://errora.com.tr/en/ac/arcelik/ch02/"
  },
  {
   "type": "ac",
   "code": "CH03",
   "brand": "Arçelik",
   "device": "Air conditioner",
   "meaning": "Remote control / thermostat error",
   "severity": "Low",
   "causes": "Flat batteries or connection problem in the remote control / thermostat; Damaged wiring or a loose/corroded connector",
   "fixes": "Replace the remote control / thermostat batteries and check its connection; Switch the unit off at the breaker for about 5 minutes, then switch it back on; If the code returns, contact an authorised AC technician; don't open the unit yourself",
   "source": "https://www.arcelik.com.tr/blog/klima-hata-kodlari",
   "url": "https://errora.com.tr/en/ac/arcelik/ch03/"
  },
  {
   "type": "ac",
   "code": "CH04",
   "brand": "Arçelik",
   "device": "Air conditioner",
   "meaning": "Condensate drain (float switch) fault",
   "severity": "Medium",
   "causes": "Blocked condensate drain or tray; Faulty sensor or component",
   "fixes": "Switch the unit off at the breaker for about 5 minutes, then switch it back on; If the code returns, contact an authorised AC technician; don't open the unit yourself",
   "source": "https://www.arcelik.com.tr/blog/klima-hata-kodlari",
   "url": "https://errora.com.tr/en/ac/arcelik/ch04/"
  },
  {
   "type": "ac",
   "code": "CH05",
   "brand": "Arçelik",
   "device": "Air conditioner",
   "meaning": "Communication error between indoor and outdoor units",
   "severity": "Medium",
   "causes": "Installation fault: wiring, unit combination or pipework; Damaged wiring or a loose/corroded connector; Unstable mains power or a loose plug/socket; Faulty control or motor board",
   "fixes": "Switch the unit off at the breaker for about 5 minutes, then switch it back on; If it appeared right after installation, ask your installer to check the wiring and setup; If the code returns, contact an authorised AC technician; don't open the unit yourself",
   "source": "https://www.arcelik.com.tr/blog/klima-hata-kodlari",
   "url": "https://errora.com.tr/en/ac/arcelik/ch05/"
  },
  {
   "type": "ac",
   "code": "CH06",
   "brand": "Arçelik",
   "device": "Air conditioner",
   "meaning": "Pipe (coil) temperature sensor fault",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector",
   "fixes": "Switch the unit off at the breaker for about 5 minutes, then switch it back on; If the code returns, contact an authorised AC technician; don't open the unit yourself",
   "source": "https://www.arcelik.com.tr/blog/klima-hata-kodlari",
   "url": "https://errora.com.tr/en/ac/arcelik/ch06/"
  },
  {
   "type": "ac",
   "code": "CH09",
   "brand": "Arçelik",
   "device": "Air conditioner",
   "meaning": "Memory (EEPROM) error",
   "severity": "Medium",
   "causes": "Faulty control or motor board",
   "fixes": "Switch the unit off at the breaker for about 5 minutes, then switch it back on; If the code returns, contact an authorised AC technician; don't open the unit yourself",
   "source": "https://www.arcelik.com.tr/blog/klima-hata-kodlari",
   "url": "https://errora.com.tr/en/ac/arcelik/ch09/"
  },
  {
   "type": "ac",
   "code": "CH10",
   "brand": "Arçelik",
   "device": "Air conditioner",
   "meaning": "Fan fault",
   "severity": "Medium",
   "causes": "Faulty fan motor or fan wiring; Ice build-up on the fan or evaporator; Damaged wiring or a loose/corroded connector",
   "fixes": "Switch the unit off at the breaker for about 5 minutes, then switch it back on; Clean the indoor unit filters and clear anything blocking the outdoor unit; If the code returns, contact an authorised AC technician; don't open the unit yourself",
   "source": "https://www.arcelik.com.tr/blog/klima-hata-kodlari",
   "url": "https://errora.com.tr/en/ac/arcelik/ch10/"
  },
  {
   "type": "ac",
   "code": "CH21",
   "brand": "Arçelik",
   "device": "Air conditioner",
   "meaning": "Inverter / compressor drive fault",
   "severity": "High",
   "causes": "Compressor or compressor drive (inverter) fault; Unstable mains power or a loose plug/socket; Faulty control or motor board",
   "fixes": "Switch the unit off at the breaker for about 5 minutes, then switch it back on; If the code returns, contact an authorised AC technician; don't open the unit yourself",
   "source": "https://www.arcelik.com.tr/blog/klima-hata-kodlari",
   "url": "https://errora.com.tr/en/ac/arcelik/ch21/"
  },
  {
   "type": "ac",
   "code": "CH29",
   "brand": "Arçelik",
   "device": "Air conditioner",
   "meaning": "Compressor fault",
   "severity": "High",
   "causes": "Compressor or compressor drive (inverter) fault; Unstable mains power or a loose plug/socket; Refrigerant leak or incorrect refrigerant charge",
   "fixes": "Switch the unit off at the breaker for about 5 minutes, then switch it back on; If the code returns, contact an authorised AC technician; don't open the unit yourself",
   "source": "https://www.arcelik.com.tr/blog/klima-hata-kodlari",
   "url": "https://errora.com.tr/en/ac/arcelik/ch29/"
  },
  {
   "type": "ac",
   "code": "CH32",
   "brand": "Arçelik",
   "device": "Air conditioner",
   "meaning": "Compressor discharge temperature too high",
   "severity": "High",
   "causes": "Refrigerant leak or incorrect refrigerant charge; Dirty filters or blocked airflow around the condenser / outdoor unit; Very high outdoor temperature or poor ventilation",
   "fixes": "Clean the indoor unit filters and clear anything blocking the outdoor unit; Switch the unit off at the breaker for about 5 minutes, then switch it back on; If the code returns, contact an authorised AC technician; don't open the unit yourself",
   "source": "https://www.arcelik.com.tr/blog/klima-hata-kodlari",
   "url": "https://errora.com.tr/en/ac/arcelik/ch32/"
  },
  {
   "type": "ac",
   "code": "CH34",
   "brand": "Arçelik",
   "device": "Air conditioner",
   "meaning": "Refrigerant pressure too high",
   "severity": "High",
   "causes": "Dirty filters or blocked airflow around the condenser / outdoor unit; Very high outdoor temperature or poor ventilation; Refrigerant leak or incorrect refrigerant charge",
   "fixes": "Clean the indoor unit filters and clear anything blocking the outdoor unit; Leave enough space around the appliance or outdoor unit for airflow; If the code returns, contact an authorised AC technician; don't open the unit yourself",
   "source": "https://www.arcelik.com.tr/blog/klima-hata-kodlari",
   "url": "https://errora.com.tr/en/ac/arcelik/ch34/"
  },
  {
   "type": "ac",
   "code": "CH35",
   "brand": "Arçelik",
   "device": "Air conditioner",
   "meaning": "Refrigerant pressure too low",
   "severity": "High",
   "causes": "Refrigerant leak or incorrect refrigerant charge; Installation fault: wiring, unit combination or pipework",
   "fixes": "Switch the unit off at the breaker for about 5 minutes, then switch it back on; If the code returns, contact an authorised AC technician; don't open the unit yourself",
   "source": "https://www.arcelik.com.tr/blog/klima-hata-kodlari",
   "url": "https://errora.com.tr/en/ac/arcelik/ch35/"
  },
  {
   "type": "ac",
   "code": "CH38",
   "brand": "Arçelik",
   "device": "Air conditioner",
   "meaning": "Refrigerant shortage or leak",
   "severity": "High",
   "causes": "Refrigerant leak or incorrect refrigerant charge; Installation fault: wiring, unit combination or pipework",
   "fixes": "Switch the unit off at the breaker for about 5 minutes, then switch it back on; If it appeared right after installation, ask your installer to check the wiring and setup; If the code returns, contact an authorised AC technician; don't open the unit yourself",
   "source": "https://www.arcelik.com.tr/blog/klima-hata-kodlari",
   "url": "https://errora.com.tr/en/ac/arcelik/ch38/"
  },
  {
   "type": "ac",
   "code": "CH44",
   "brand": "Arçelik",
   "device": "Air conditioner",
   "meaning": "Temperature sensor (thermistor) fault",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector",
   "fixes": "Switch the unit off at the breaker for about 5 minutes, then switch it back on; If the code returns, contact an authorised AC technician; don't open the unit yourself",
   "source": "https://www.arcelik.com.tr/blog/klima-hata-kodlari",
   "url": "https://errora.com.tr/en/ac/arcelik/ch44/"
  },
  {
   "type": "ac",
   "code": "CH51",
   "brand": "Arçelik",
   "device": "Air conditioner",
   "meaning": "Indoor and outdoor units don't match",
   "severity": "Medium",
   "causes": "Installation fault: wiring, unit combination or pipework",
   "fixes": "If it appeared right after installation, ask your installer to check the wiring and setup; If the code returns, contact an authorised AC technician; don't open the unit yourself",
   "source": "https://www.arcelik.com.tr/blog/klima-hata-kodlari",
   "url": "https://errora.com.tr/en/ac/arcelik/ch51/"
  },
  {
   "type": "ac",
   "code": "CH53",
   "brand": "Arçelik",
   "device": "Air conditioner",
   "meaning": "Communication error between indoor and outdoor units",
   "severity": "Medium",
   "causes": "Installation fault: wiring, unit combination or pipework; Damaged wiring or a loose/corroded connector; Unstable mains power or a loose plug/socket; Faulty control or motor board",
   "fixes": "Switch the unit off at the breaker for about 5 minutes, then switch it back on; If it appeared right after installation, ask your installer to check the wiring and setup; If the code returns, contact an authorised AC technician; don't open the unit yourself",
   "source": "https://www.arcelik.com.tr/blog/klima-hata-kodlari",
   "url": "https://errora.com.tr/en/ac/arcelik/ch53/"
  },
  {
   "type": "ac",
   "code": "CH67",
   "brand": "Arçelik",
   "device": "Air conditioner",
   "meaning": "Fan fault",
   "severity": "Medium",
   "causes": "Faulty fan motor or fan wiring; Ice build-up on the fan or evaporator; Damaged wiring or a loose/corroded connector",
   "fixes": "Switch the unit off at the breaker for about 5 minutes, then switch it back on; Clean the indoor unit filters and clear anything blocking the outdoor unit; If the code returns, contact an authorised AC technician; don't open the unit yourself",
   "source": "https://www.arcelik.com.tr/blog/klima-hata-kodlari",
   "url": "https://errora.com.tr/en/ac/arcelik/ch67/"
  },
  {
   "type": "ac",
   "code": "CH05",
   "brand": "LG",
   "device": "Air conditioner",
   "meaning": "Communication error between indoor and outdoor units",
   "severity": "Medium",
   "causes": "Installation fault: wiring, unit combination or pipework; Damaged wiring or a loose/corroded connector; Unstable mains power or a loose plug/socket; Faulty control or motor board",
   "fixes": "Switch the unit off at the breaker for about 5 minutes, then switch it back on; If it appeared right after installation, ask your installer to check the wiring and setup; If the code returns, contact an authorised AC technician; don't open the unit yourself",
   "source": "https://www.lg.com/levant_en/support/product-help/CT20158041-20155402843500",
   "url": "https://errora.com.tr/en/ac/lg/ch05/"
  },
  {
   "type": "ac",
   "code": "CH38",
   "brand": "LG",
   "device": "Air conditioner",
   "meaning": "Refrigerant shortage or leak",
   "severity": "High",
   "causes": "Refrigerant leak or incorrect refrigerant charge; Installation fault: wiring, unit combination or pipework",
   "fixes": "Switch the unit off at the breaker for about 5 minutes, then switch it back on; If it appeared right after installation, ask your installer to check the wiring and setup; If the code returns, contact an authorised AC technician; don't open the unit yourself",
   "source": "https://www.lg.com/levant_en/support/product-help/CT20158041-20155402843500",
   "url": "https://errora.com.tr/en/ac/lg/ch38/"
  },
  {
   "type": "ac",
   "code": "E121",
   "brand": "Samsung",
   "device": "Air conditioner",
   "meaning": "Temperature sensor (thermistor) fault",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector",
   "fixes": "Switch the unit off at the breaker for about 5 minutes, then switch it back on; If the code returns, contact an authorised AC technician; don't open the unit yourself",
   "source": "https://www.samsung.com/ae/support/home-appliances/error-codes-on-samsung-indoor-air-conditioner/",
   "url": "https://errora.com.tr/en/ac/samsung/e121/"
  },
  {
   "type": "ac",
   "code": "E122",
   "brand": "Samsung",
   "device": "Air conditioner",
   "meaning": "Pipe (coil) temperature sensor fault",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector",
   "fixes": "Switch the unit off at the breaker for about 5 minutes, then switch it back on; If the code returns, contact an authorised AC technician; don't open the unit yourself",
   "source": "https://www.samsung.com/ae/support/home-appliances/error-codes-on-samsung-indoor-air-conditioner/",
   "url": "https://errora.com.tr/en/ac/samsung/e122/"
  },
  {
   "type": "ac",
   "code": "E154",
   "brand": "Samsung",
   "device": "Air conditioner",
   "meaning": "Fan fault",
   "severity": "Medium",
   "causes": "Faulty fan motor or fan wiring; Ice build-up on the fan or evaporator; Damaged wiring or a loose/corroded connector",
   "fixes": "Switch the unit off at the breaker for about 5 minutes, then switch it back on; Clean the indoor unit filters and clear anything blocking the outdoor unit; If the code returns, contact an authorised AC technician; don't open the unit yourself",
   "source": "https://www.samsung.com/ae/support/home-appliances/error-codes-on-samsung-indoor-air-conditioner/",
   "url": "https://errora.com.tr/en/ac/samsung/e154/"
  },
  {
   "type": "ac",
   "code": "E163",
   "brand": "Samsung",
   "device": "Air conditioner",
   "meaning": "Memory (EEPROM) error",
   "severity": "Medium",
   "causes": "Faulty control or motor board",
   "fixes": "Switch the unit off at the breaker for about 5 minutes, then switch it back on; If the code returns, contact an authorised AC technician; don't open the unit yourself",
   "source": "https://www.samsung.com/ae/support/home-appliances/error-codes-on-samsung-indoor-air-conditioner/",
   "url": "https://errora.com.tr/en/ac/samsung/e163/"
  },
  {
   "type": "ac",
   "code": "CF",
   "brand": "Samsung",
   "device": "Air conditioner",
   "meaning": "Filter cleaning reminder",
   "severity": "Info (not a fault)",
   "causes": "The filter has reached its cleaning interval",
   "fixes": "Clean the indoor unit filters and clear anything blocking the outdoor unit; Reset the filter indicator with the remote control",
   "source": "https://www.samsung.com/ae/support/home-appliances/error-codes-on-samsung-indoor-air-conditioner/",
   "url": "https://errora.com.tr/en/ac/samsung/cf/"
  },
  {
   "type": "ac",
   "code": "dF",
   "brand": "Samsung",
   "device": "Air conditioner",
   "meaning": "Automatic defrost in progress",
   "severity": "Info (not a fault)",
   "causes": "Normal heating operation in cold, humid weather",
   "fixes": "Wait: heating resumes automatically when defrosting finishes",
   "source": "https://www.samsung.com/ae/support/home-appliances/error-codes-on-samsung-indoor-air-conditioner/",
   "url": "https://errora.com.tr/en/ac/samsung/df/"
  },
  {
   "type": "ac",
   "code": "U4",
   "brand": "Daikin",
   "device": "Air conditioner",
   "meaning": "Communication error between indoor and outdoor units",
   "severity": "Medium",
   "causes": "Installation fault: wiring, unit combination or pipework; Damaged wiring or a loose/corroded connector; Unstable mains power or a loose plug/socket; Faulty control or motor board",
   "fixes": "Switch the unit off at the breaker for about 5 minutes, then switch it back on; If it appeared right after installation, ask your installer to check the wiring and setup; If the code returns, contact an authorised AC technician; don't open the unit yourself",
   "source": "https://www.glowhce.com.au/daikin-error-codes-system/",
   "url": "https://errora.com.tr/en/ac/daikin/u4/"
  },
  {
   "type": "ac",
   "code": "U0",
   "brand": "Daikin",
   "device": "Air conditioner",
   "meaning": "Refrigerant shortage or leak",
   "severity": "High",
   "causes": "Refrigerant leak or incorrect refrigerant charge; Installation fault: wiring, unit combination or pipework",
   "fixes": "Switch the unit off at the breaker for about 5 minutes, then switch it back on; If it appeared right after installation, ask your installer to check the wiring and setup; If the code returns, contact an authorised AC technician; don't open the unit yourself",
   "source": "https://www.glowhce.com.au/daikin-error-codes-system/",
   "url": "https://errora.com.tr/en/ac/daikin/u0/"
  },
  {
   "type": "ac",
   "code": "U2",
   "brand": "Daikin",
   "device": "Air conditioner",
   "meaning": "Power supply voltage out of range",
   "severity": "Medium",
   "causes": "Unstable mains power or a loose plug/socket; Installation fault: wiring, unit combination or pipework",
   "fixes": "Switch the unit off at the breaker for about 5 minutes, then switch it back on; Plug directly into a wall socket (no extension lead) and check your power supply; If the code returns, contact an authorised AC technician; don't open the unit yourself",
   "source": "https://www.glowhce.com.au/daikin-error-codes-system/",
   "url": "https://errora.com.tr/en/ac/daikin/u2/"
  },
  {
   "type": "ac",
   "code": "U1",
   "brand": "Daikin",
   "device": "Air conditioner",
   "meaning": "Power supply voltage out of range",
   "severity": "Medium",
   "causes": "Unstable mains power or a loose plug/socket; Installation fault: wiring, unit combination or pipework",
   "fixes": "Switch the unit off at the breaker for about 5 minutes, then switch it back on; Plug directly into a wall socket (no extension lead) and check your power supply; If the code returns, contact an authorised AC technician; don't open the unit yourself",
   "source": "https://www.glowhce.com.au/daikin-error-codes-system/",
   "url": "https://errora.com.tr/en/ac/daikin/u1/"
  },
  {
   "type": "ac",
   "code": "UA",
   "brand": "Daikin",
   "device": "Air conditioner",
   "meaning": "Indoor and outdoor units don't match",
   "severity": "Medium",
   "causes": "Installation fault: wiring, unit combination or pipework",
   "fixes": "If it appeared right after installation, ask your installer to check the wiring and setup; If the code returns, contact an authorised AC technician; don't open the unit yourself",
   "source": "https://www.glowhce.com.au/daikin-error-codes-system/",
   "url": "https://errora.com.tr/en/ac/daikin/ua/"
  },
  {
   "type": "fridge",
   "code": "21E",
   "brand": "Samsung",
   "device": "Refrigerator",
   "meaning": "Freezer fan fault",
   "severity": "Medium",
   "causes": "Ice build-up on the fan or evaporator; Door left open or door seal not closing properly; Faulty fan motor or fan wiring",
   "fixes": "Make sure the doors are fully closed and the seals are clean and intact; If the fan or coil is iced up, unplug and defrost the appliance with the doors open; Unplug the fridge for about 1 minute, then plug it into a wall socket (no power strip); Keep the doors closed to protect food and contact authorised service if the code returns",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10007315/",
   "url": "https://errora.com.tr/en/fridge/samsung/21e/"
  },
  {
   "type": "fridge",
   "code": "22E",
   "brand": "Samsung",
   "device": "Refrigerator",
   "meaning": "Fridge compartment fan fault",
   "severity": "Medium",
   "causes": "Door left open or door seal not closing properly; Ice build-up on the fan or evaporator; Faulty fan motor or fan wiring",
   "fixes": "Make sure the doors are fully closed and the seals are clean and intact; If the fan or coil is iced up, unplug and defrost the appliance with the doors open; Unplug the fridge for about 1 minute, then plug it into a wall socket (no power strip); Keep the doors closed to protect food and contact authorised service if the code returns",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10007315/",
   "url": "https://errora.com.tr/en/fridge/samsung/22e/"
  },
  {
   "type": "fridge",
   "code": "5E",
   "brand": "Samsung",
   "device": "Refrigerator",
   "meaning": "Defrost system fault",
   "severity": "Medium",
   "causes": "Faulty defrost heater, sensor or thermal fuse; Ice build-up on the fan or evaporator",
   "fixes": "If the fan or coil is iced up, unplug and defrost the appliance with the doors open; Unplug the fridge for about 1 minute, then plug it into a wall socket (no power strip); Keep the doors closed to protect food and contact authorised service if the code returns",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10007315/",
   "url": "https://errora.com.tr/en/fridge/samsung/5e/"
  },
  {
   "type": "fridge",
   "code": "8E",
   "brand": "Samsung",
   "device": "Refrigerator",
   "meaning": "Ice maker fault",
   "severity": "Low",
   "causes": "Faulty ice maker motor, sensor or heater; Ice build-up on the fan or evaporator",
   "fixes": "Unplug the fridge for about 1 minute, then plug it into a wall socket (no power strip); Keep the doors closed to protect food and contact authorised service if the code returns",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10007315/",
   "url": "https://errora.com.tr/en/fridge/samsung/8e/"
  },
  {
   "type": "fridge",
   "code": "33E",
   "brand": "Samsung",
   "device": "Refrigerator",
   "meaning": "Ice maker fault",
   "severity": "Low",
   "causes": "Faulty ice maker motor, sensor or heater; Ice build-up on the fan or evaporator",
   "fixes": "Unplug the fridge for about 1 minute, then plug it into a wall socket (no power strip); Keep the doors closed to protect food and contact authorised service if the code returns",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10007315/",
   "url": "https://errora.com.tr/en/fridge/samsung/33e/"
  },
  {
   "type": "fridge",
   "code": "39E",
   "brand": "Samsung",
   "device": "Refrigerator",
   "meaning": "Ice maker fault",
   "severity": "Low",
   "causes": "Faulty ice maker motor, sensor or heater; Ice build-up on the fan or evaporator",
   "fixes": "Unplug the fridge for about 1 minute, then plug it into a wall socket (no power strip); Keep the doors closed to protect food and contact authorised service if the code returns",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10007315/",
   "url": "https://errora.com.tr/en/fridge/samsung/39e/"
  },
  {
   "type": "fridge",
   "code": "83E",
   "brand": "Samsung",
   "device": "Refrigerator",
   "meaning": "Compressor fault",
   "severity": "High",
   "causes": "Compressor or compressor drive (inverter) fault; Unstable mains power or a loose plug/socket",
   "fixes": "Unplug the fridge for about 1 minute, then plug it into a wall socket (no power strip); Keep the doors closed to protect food and contact authorised service if the code returns",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10007315/",
   "url": "https://errora.com.tr/en/fridge/samsung/83e/"
  },
  {
   "type": "fridge",
   "code": "85E",
   "brand": "Samsung",
   "device": "Refrigerator",
   "meaning": "Power supply voltage out of range",
   "severity": "Low",
   "causes": "Unstable mains power or a loose plug/socket",
   "fixes": "Unplug the fridge for about 1 minute, then plug it into a wall socket (no power strip); Plug directly into a wall socket (no extension lead) and check your power supply",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10007315/",
   "url": "https://errora.com.tr/en/fridge/samsung/85e/"
  },
  {
   "type": "fridge",
   "code": "88 88",
   "brand": "Samsung",
   "device": "Refrigerator",
   "meaning": "Communication error between control boards",
   "severity": "Medium",
   "causes": "Unstable mains power or a loose plug/socket; Damaged wiring or a loose/corroded connector; Faulty control or motor board",
   "fixes": "Unplug the fridge for about 1 minute, then plug it into a wall socket (no power strip); Keep the doors closed to protect food and contact authorised service if the code returns",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10007315/",
   "url": "https://errora.com.tr/en/fridge/samsung/88-88/"
  },
  {
   "type": "fridge",
   "code": "OF OF",
   "brand": "Samsung",
   "device": "Refrigerator",
   "meaning": "Demo / shop mode on (cooling off)",
   "severity": "Info (not a fault)",
   "causes": "Demo/shop mode was switched on (common on display units)",
   "fixes": "Turn off demo mode using the button combination in your manual",
   "source": "https://www.samsung.com/us/support/troubleshoot/TSG10007315/",
   "url": "https://errora.com.tr/en/fridge/samsung/of-of/"
  },
  {
   "type": "fridge",
   "code": "FF",
   "brand": "LG",
   "device": "Refrigerator",
   "meaning": "Freezer fan fault",
   "severity": "Medium",
   "causes": "Ice build-up on the fan or evaporator; Door left open or door seal not closing properly; Faulty fan motor or fan wiring",
   "fixes": "Make sure the doors are fully closed and the seals are clean and intact; If the fan or coil is iced up, unplug and defrost the appliance with the doors open; Unplug the fridge for about 1 minute, then plug it into a wall socket (no power strip); Keep the doors closed to protect food and contact authorised service if the code returns",
   "source": "https://www.lg.com/us/support/help-library/lg-refrigerator-digital-and-analog-error-codes--20154835849096",
   "url": "https://errora.com.tr/en/fridge/lg/ff/"
  },
  {
   "type": "fridge",
   "code": "rF",
   "brand": "LG",
   "device": "Refrigerator",
   "meaning": "Fridge compartment fan fault",
   "severity": "Medium",
   "causes": "Door left open or door seal not closing properly; Ice build-up on the fan or evaporator; Faulty fan motor or fan wiring",
   "fixes": "Make sure the doors are fully closed and the seals are clean and intact; If the fan or coil is iced up, unplug and defrost the appliance with the doors open; Unplug the fridge for about 1 minute, then plug it into a wall socket (no power strip); Keep the doors closed to protect food and contact authorised service if the code returns",
   "source": "https://www.lg.com/us/support/help-library/lg-refrigerator-digital-and-analog-error-codes--20154835849096",
   "url": "https://errora.com.tr/en/fridge/lg/rf/"
  },
  {
   "type": "fridge",
   "code": "CF",
   "brand": "LG",
   "device": "Refrigerator",
   "meaning": "Condenser fan fault",
   "severity": "Medium",
   "causes": "Faulty fan motor or fan wiring; Dirty filters or blocked airflow around the condenser / outdoor unit",
   "fixes": "Leave enough space around the appliance or outdoor unit for airflow; Unplug the fridge for about 1 minute, then plug it into a wall socket (no power strip); Keep the doors closed to protect food and contact authorised service if the code returns",
   "source": "https://www.lg.com/us/support/help-library/lg-refrigerator-digital-and-analog-error-codes--20154835849096",
   "url": "https://errora.com.tr/en/fridge/lg/cf/"
  },
  {
   "type": "fridge",
   "code": "dH",
   "brand": "LG",
   "device": "Refrigerator",
   "meaning": "Defrost system fault",
   "severity": "Medium",
   "causes": "Faulty defrost heater, sensor or thermal fuse; Ice build-up on the fan or evaporator",
   "fixes": "If the fan or coil is iced up, unplug and defrost the appliance with the doors open; Unplug the fridge for about 1 minute, then plug it into a wall socket (no power strip); Keep the doors closed to protect food and contact authorised service if the code returns",
   "source": "https://www.lg.com/us/support/help-library/lg-refrigerator-digital-and-analog-error-codes--20154835849096",
   "url": "https://errora.com.tr/en/fridge/lg/dh/"
  },
  {
   "type": "fridge",
   "code": "FS",
   "brand": "LG",
   "device": "Refrigerator",
   "meaning": "Temperature sensor (thermistor) fault",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector",
   "fixes": "Unplug the fridge for about 1 minute, then plug it into a wall socket (no power strip); Keep the doors closed to protect food and contact authorised service if the code returns",
   "source": "https://www.lg.com/us/support/help-library/lg-refrigerator-digital-and-analog-error-codes--20154835849096",
   "url": "https://errora.com.tr/en/fridge/lg/fs/"
  },
  {
   "type": "fridge",
   "code": "rS",
   "brand": "LG",
   "device": "Refrigerator",
   "meaning": "Temperature sensor (thermistor) fault",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector",
   "fixes": "Unplug the fridge for about 1 minute, then plug it into a wall socket (no power strip); Keep the doors closed to protect food and contact authorised service if the code returns",
   "source": "https://www.lg.com/us/support/help-library/lg-refrigerator-digital-and-analog-error-codes--20154835849096",
   "url": "https://errora.com.tr/en/fridge/lg/rs/"
  },
  {
   "type": "fridge",
   "code": "dS",
   "brand": "LG",
   "device": "Refrigerator",
   "meaning": "Defrost system fault",
   "severity": "Medium",
   "causes": "Faulty defrost heater, sensor or thermal fuse; Ice build-up on the fan or evaporator",
   "fixes": "If the fan or coil is iced up, unplug and defrost the appliance with the doors open; Unplug the fridge for about 1 minute, then plug it into a wall socket (no power strip); Keep the doors closed to protect food and contact authorised service if the code returns",
   "source": "https://www.lg.com/us/support/help-library/lg-refrigerator-digital-and-analog-error-codes--20154835849096",
   "url": "https://errora.com.tr/en/fridge/lg/ds/"
  },
  {
   "type": "fridge",
   "code": "IF",
   "brand": "LG",
   "device": "Refrigerator",
   "meaning": "Ice maker fault",
   "severity": "Low",
   "causes": "Faulty ice maker motor, sensor or heater; Ice build-up on the fan or evaporator",
   "fixes": "Unplug the fridge for about 1 minute, then plug it into a wall socket (no power strip); Keep the doors closed to protect food and contact authorised service if the code returns",
   "source": "https://www.lg.com/us/support/help-library/lg-refrigerator-digital-and-analog-error-codes--20154835849096",
   "url": "https://errora.com.tr/en/fridge/lg/if/"
  },
  {
   "type": "fridge",
   "code": "CO",
   "brand": "LG",
   "device": "Refrigerator",
   "meaning": "Communication error between control boards",
   "severity": "Medium",
   "causes": "Unstable mains power or a loose plug/socket; Damaged wiring or a loose/corroded connector; Faulty control or motor board",
   "fixes": "Unplug the fridge for about 1 minute, then plug it into a wall socket (no power strip); Keep the doors closed to protect food and contact authorised service if the code returns",
   "source": "https://www.lg.com/us/support/help-library/lg-refrigerator-digital-and-analog-error-codes--20154835849096",
   "url": "https://errora.com.tr/en/fridge/lg/co/"
  },
  {
   "type": "fridge",
   "code": "CH",
   "brand": "LG",
   "device": "Refrigerator",
   "meaning": "Refrigerant shortage or leak",
   "severity": "High",
   "causes": "Refrigerant leak or incorrect refrigerant charge",
   "fixes": "Keep the doors closed to protect food and contact authorised service if the code returns",
   "source": "https://www.lg.com/us/support/help-library/lg-refrigerator-digital-and-analog-error-codes--20154835849096",
   "url": "https://errora.com.tr/en/fridge/lg/ch/"
  },
  {
   "type": "fridge",
   "code": "E0",
   "brand": "Arçelik",
   "device": "Refrigerator",
   "meaning": "Temperature sensor (thermistor) fault",
   "severity": "Medium",
   "causes": "Faulty sensor or component; Damaged wiring or a loose/corroded connector",
   "fixes": "Unplug the fridge for about 1 minute, then plug it into a wall socket (no power strip); Keep the doors closed to protect food and contact authorised service if the code returns",
   "source": "https://www.arcelik.com.tr/blog/buzdolabi-hata-kodlari",
   "url": "https://errora.com.tr/en/fridge/arcelik/e0/"
  },
  {
   "type": "fridge",
   "code": "E4",
   "brand": "Arçelik",
   "device": "Refrigerator",
   "meaning": "Defrost system fault",
   "severity": "Medium",
   "causes": "Faulty defrost heater, sensor or thermal fuse; Ice build-up on the fan or evaporator",
   "fixes": "If the fan or coil is iced up, unplug and defrost the appliance with the doors open; Unplug the fridge for about 1 minute, then plug it into a wall socket (no power strip); Keep the doors closed to protect food and contact authorised service if the code returns",
   "source": "https://www.arcelik.com.tr/blog/buzdolabi-hata-kodlari",
   "url": "https://errora.com.tr/en/fridge/arcelik/e4/"
  },
  {
   "type": "fridge",
   "code": "E13",
   "brand": "Arçelik",
   "device": "Refrigerator",
   "meaning": "Freezer fan fault",
   "severity": "Medium",
   "causes": "Ice build-up on the fan or evaporator; Door left open or door seal not closing properly; Faulty fan motor or fan wiring",
   "fixes": "Make sure the doors are fully closed and the seals are clean and intact; If the fan or coil is iced up, unplug and defrost the appliance with the doors open; Unplug the fridge for about 1 minute, then plug it into a wall socket (no power strip); Keep the doors closed to protect food and contact authorised service if the code returns",
   "source": "https://www.arcelik.com.tr/blog/buzdolabi-hata-kodlari",
   "url": "https://errora.com.tr/en/fridge/arcelik/e13/"
  },
  {
   "type": "fridge",
   "code": "E15",
   "brand": "Arçelik",
   "device": "Refrigerator",
   "meaning": "Condenser fan fault",
   "severity": "Medium",
   "causes": "Faulty fan motor or fan wiring; Dirty filters or blocked airflow around the condenser / outdoor unit",
   "fixes": "Leave enough space around the appliance or outdoor unit for airflow; Unplug the fridge for about 1 minute, then plug it into a wall socket (no power strip); Keep the doors closed to protect food and contact authorised service if the code returns",
   "source": "https://www.arcelik.com.tr/blog/buzdolabi-hata-kodlari",
   "url": "https://errora.com.tr/en/fridge/arcelik/e15/"
  },
  {
   "type": "fridge",
   "code": "E16",
   "brand": "Arçelik",
   "device": "Refrigerator",
   "meaning": "Fridge compartment fan fault",
   "severity": "Medium",
   "causes": "Door left open or door seal not closing properly; Ice build-up on the fan or evaporator; Faulty fan motor or fan wiring",
   "fixes": "Make sure the doors are fully closed and the seals are clean and intact; If the fan or coil is iced up, unplug and defrost the appliance with the doors open; Unplug the fridge for about 1 minute, then plug it into a wall socket (no power strip); Keep the doors closed to protect food and contact authorised service if the code returns",
   "source": "https://www.arcelik.com.tr/blog/buzdolabi-hata-kodlari",
   "url": "https://errora.com.tr/en/fridge/arcelik/e16/"
  },
  {
   "type": "fridge",
   "code": "E9",
   "brand": "Arçelik",
   "device": "Refrigerator",
   "meaning": "Ice maker fault",
   "severity": "Low",
   "causes": "Faulty ice maker motor, sensor or heater; Ice build-up on the fan or evaporator",
   "fixes": "Unplug the fridge for about 1 minute, then plug it into a wall socket (no power strip); Keep the doors closed to protect food and contact authorised service if the code returns",
   "source": "https://www.arcelik.com.tr/blog/buzdolabi-hata-kodlari",
   "url": "https://errora.com.tr/en/fridge/arcelik/e9/"
  },
  {
   "type": "windows",
   "code": "IRQL_NOT_LESS_OR_EQUAL (0x0000000A)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "A driver or system process tried to access memory it was not allowed to use, usually because of a faulty driver.",
   "severity": "Medium",
   "causes": "Faulty, outdated or incompatible driver; Faulty or incompatible RAM; Conflict with antivirus, VPN or system utility software",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Find the faulting driver: check Event Viewer and the dump files in C:\\Windows\\Minidump; Update or roll back the driver of the faulting device in Device Manager (look for yellow warning icons); Install the latest Windows updates; Test the RAM with Windows Memory Diagnostic (mdsched.exe); Uninstall recently installed programs, especially antivirus, VPN or system tools",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0xa--irql-not-less-or-equal https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/irql-not-less-or-equal/"
  },
  {
   "type": "windows",
   "code": "BAD_POOL_HEADER (0x00000019)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "The memory pool used by Windows has become corrupted, usually by a faulty driver.",
   "severity": "Medium",
   "causes": "Faulty, outdated or incompatible driver; Faulty or incompatible RAM; Failing or corrupted disk or SSD",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Find the faulting driver: check Event Viewer and the dump files in C:\\Windows\\Minidump; Update or roll back the driver of the faulting device in Device Manager (look for yellow warning icons); Install the latest Windows updates; Test the RAM with Windows Memory Diagnostic (mdsched.exe); Check the disk with \"chkdsk C: /f\" and check the drive's health",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0x19--bad-pool-header https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/bad-pool-header/"
  },
  {
   "type": "windows",
   "code": "MEMORY_MANAGEMENT (0x0000001A)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "A serious memory management error occurred, often caused by faulty RAM or a driver.",
   "severity": "High",
   "causes": "Faulty or incompatible RAM; Faulty, outdated or incompatible driver; Failing or corrupted disk or SSD",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Test the RAM with Windows Memory Diagnostic (mdsched.exe); Reset any overclocking or XMP/EXPO profile to default and check temperatures and cooling; Update or roll back the driver of the faulting device in Device Manager (look for yellow warning icons); Run \"sfc /scannow\" and \"DISM /Online /Cleanup-Image /RestoreHealth\" as administrator; Check the disk with \"chkdsk C: /f\" and check the drive's health",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0x1a--memory-management https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/memory-management/"
  },
  {
   "type": "windows",
   "code": "KMODE_EXCEPTION_NOT_HANDLED (0x0000001E)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "A program running in the Windows kernel caused an error that it did not handle.",
   "severity": "Medium",
   "causes": "Faulty, outdated or incompatible driver; Conflict with antivirus, VPN or system utility software; Faulty or incompatible RAM",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Find the faulting driver: check Event Viewer and the dump files in C:\\Windows\\Minidump; Update or roll back the driver of the faulting device in Device Manager (look for yellow warning icons); Install the latest Windows updates; Uninstall recently installed programs, especially antivirus, VPN or system tools; Test the RAM with Windows Memory Diagnostic (mdsched.exe)",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0x1e--kmode-exception-not-handled https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/kmode-exception-not-handled/"
  },
  {
   "type": "windows",
   "code": "NTFS_FILE_SYSTEM (0x00000024)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "A problem occurred in the NTFS file system driver, usually because of disk or file system corruption.",
   "severity": "High",
   "causes": "Failing or corrupted disk or SSD; Corrupted file system or Windows system files; Faulty, outdated or incompatible driver",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Check the disk with \"chkdsk C: /f\" and check the drive's health; Run \"sfc /scannow\" and \"DISM /Online /Cleanup-Image /RestoreHealth\" as administrator; Keep about 10–15% of the system drive free; Update or roll back the driver of the faulting device in Device Manager (look for yellow warning icons)",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0x24--ntfs-file-system https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/ntfs-file-system/"
  },
  {
   "type": "windows",
   "code": "DATA_BUS_ERROR (0x0000002E)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "A memory parity error was detected, which usually means faulty RAM or other hardware.",
   "severity": "High",
   "causes": "Faulty or incompatible RAM; Hardware fault (processor, motherboard, power supply)",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Test the RAM with Windows Memory Diagnostic (mdsched.exe); Reset any overclocking or XMP/EXPO profile to default and check temperatures and cooling; Disconnect recently added hardware and external devices, then restart; Run the PC or component maker's hardware diagnostics; the part may need repair or replacement",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0x2e--data-bus-error https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/data-bus-error/"
  },
  {
   "type": "windows",
   "code": "SYSTEM_SERVICE_EXCEPTION (0x0000003B)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "An error occurred while a system service was running, often caused by a driver (frequently graphics) or security software.",
   "severity": "Medium",
   "causes": "Faulty, outdated or incompatible driver; Graphics card driver problem; Conflict with antivirus, VPN or system utility software",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Find the faulting driver: check Event Viewer and the dump files in C:\\Windows\\Minidump; Update or roll back the driver of the faulting device in Device Manager (look for yellow warning icons); Install the latest Windows updates; Clean-install the latest graphics driver from the GPU maker (NVIDIA, AMD or Intel); Uninstall recently installed programs, especially antivirus, VPN or system tools; Run \"sfc /scannow\" and \"DISM /Online /Cleanup-Image /RestoreHealth\" as administrator",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0x3b--system-service-exception https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/system-service-exception/"
  },
  {
   "type": "windows",
   "code": "NO_MORE_SYSTEM_PTES (0x0000003F)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "Windows ran out of system page table entries, usually because a driver is not releasing memory.",
   "severity": "Medium",
   "causes": "Faulty, outdated or incompatible driver; Conflict with antivirus, VPN or system utility software",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Update or roll back the driver of the faulting device in Device Manager (look for yellow warning icons); Uninstall recently installed programs, especially antivirus, VPN or system tools; Install the latest Windows updates",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0x3f--no-more-system-ptes https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/no-more-system-ptes/"
  },
  {
   "type": "windows",
   "code": "PFN_LIST_CORRUPT (0x0000004E)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "Windows' list of memory pages is corrupted, usually by a driver or faulty RAM.",
   "severity": "High",
   "causes": "Faulty or incompatible RAM; Faulty, outdated or incompatible driver",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Test the RAM with Windows Memory Diagnostic (mdsched.exe); Update or roll back the driver of the faulting device in Device Manager (look for yellow warning icons); Reset any overclocking or XMP/EXPO profile to default and check temperatures and cooling",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0x4e--pfn-list-corrupt https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/pfn-list-corrupt/"
  },
  {
   "type": "windows",
   "code": "PAGE_FAULT_IN_NONPAGED_AREA (0x00000050)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "Windows tried to use memory that does not exist or is not available, often due to a driver, security software or faulty RAM.",
   "severity": "Medium",
   "causes": "Faulty, outdated or incompatible driver; Faulty or incompatible RAM; Conflict with antivirus, VPN or system utility software; Failing or corrupted disk or SSD",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Find the faulting driver: check Event Viewer and the dump files in C:\\Windows\\Minidump; Update or roll back the driver of the faulting device in Device Manager (look for yellow warning icons); Install the latest Windows updates; Test the RAM with Windows Memory Diagnostic (mdsched.exe); Uninstall recently installed programs, especially antivirus, VPN or system tools; Check the disk with \"chkdsk C: /f\" and check the drive's health",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0x50--page-fault-in-nonpaged-area https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/page-fault-in-nonpaged-area/"
  },
  {
   "type": "windows",
   "code": "BAD_SYSTEM_CONFIG_INFO (0x00000074)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "There is an error in the Windows registry configuration.",
   "severity": "Medium",
   "causes": "Corrupted registry; Recent Windows or driver update",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Start Windows in Safe Mode (Advanced startup) and troubleshoot from there; Use System Restore or uninstall the latest Windows update from Advanced startup; Run \"sfc /scannow\" and \"DISM /Online /Cleanup-Image /RestoreHealth\" as administrator",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0x74--bad-system-config-info https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/bad-system-config-info/"
  },
  {
   "type": "windows",
   "code": "KERNEL_STACK_INPAGE_ERROR (0x00000077)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "Windows could not read kernel data from the page file into memory, usually because of a disk problem or faulty RAM.",
   "severity": "High",
   "causes": "Failing or corrupted disk or SSD; Faulty or incompatible RAM; Malware",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Check the disk with \"chkdsk C: /f\" and check the drive's health; Test the RAM with Windows Memory Diagnostic (mdsched.exe); Run a full malware scan; Update the BIOS/UEFI and SSD firmware from the manufacturer",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0x77--kernel-stack-inpage-error https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/kernel-stack-inpage-error/"
  },
  {
   "type": "windows",
   "code": "KERNEL_DATA_INPAGE_ERROR (0x0000007A)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "Windows could not read a page of kernel data into memory, usually because of a disk, cable or RAM problem.",
   "severity": "High",
   "causes": "Failing or corrupted disk or SSD; Faulty or incompatible RAM; Malware",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Check the disk with \"chkdsk C: /f\" and check the drive's health; Test the RAM with Windows Memory Diagnostic (mdsched.exe); Run a full malware scan; Disconnect recently added hardware and external devices, then restart",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0x7a--kernel-data-inpage-error https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/kernel-data-inpage-error/"
  },
  {
   "type": "windows",
   "code": "INACCESSIBLE_BOOT_DEVICE (0x0000007B)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "Windows lost access to the system drive during startup.",
   "severity": "High",
   "causes": "Storage controller setting changed (AHCI/RAID) or missing storage driver; Recent Windows or driver update; Failing or corrupted disk or SSD",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Make sure the BIOS storage mode (AHCI/RAID/VMD) was not changed and the storage driver is installed; Start Windows in Safe Mode (Advanced startup) and troubleshoot from there; Use System Restore or uninstall the latest Windows update from Advanced startup; Check the disk with \"chkdsk C: /f\" and check the drive's health",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0x7b--inaccessible-boot-device https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/inaccessible-boot-device/"
  },
  {
   "type": "windows",
   "code": "SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (0x0000007E)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "A system thread caused an error that was not handled, usually because of a driver.",
   "severity": "Medium",
   "causes": "Faulty, outdated or incompatible driver; Graphics card driver problem; Recent Windows or driver update",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Find the faulting driver: check Event Viewer and the dump files in C:\\Windows\\Minidump; Update or roll back the driver of the faulting device in Device Manager (look for yellow warning icons); Install the latest Windows updates; Clean-install the latest graphics driver from the GPU maker (NVIDIA, AMD or Intel); Start Windows in Safe Mode (Advanced startup) and troubleshoot from there; Use System Restore or uninstall the latest Windows update from Advanced startup",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0x7e--system-thread-exception-not-handled https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/system-thread-exception-not-handled/"
  },
  {
   "type": "windows",
   "code": "UNEXPECTED_KERNEL_MODE_TRAP (0x0000007F)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "The processor raised a trap that the Windows kernel could not handle, often a hardware or overclocking problem.",
   "severity": "High",
   "causes": "Hardware fault (processor, motherboard, power supply); Faulty or incompatible RAM; Overclocking, overheating or unstable power",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Reset any overclocking or XMP/EXPO profile to default and check temperatures and cooling; Test the RAM with Windows Memory Diagnostic (mdsched.exe); Disconnect recently added hardware and external devices, then restart; Run the PC or component maker's hardware diagnostics; the part may need repair or replacement",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0x7f--unexpected-kernel-mode-trap https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/unexpected-kernel-mode-trap/"
  },
  {
   "type": "windows",
   "code": "MACHINE_CHECK_EXCEPTION (0x0000009C)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "The processor reported a fatal hardware error (machine check).",
   "severity": "High",
   "causes": "Hardware fault (processor, motherboard, power supply); Overclocking, overheating or unstable power; Outdated BIOS/UEFI or SSD firmware",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Reset any overclocking or XMP/EXPO profile to default and check temperatures and cooling; Update the BIOS/UEFI and SSD firmware from the manufacturer; Run the PC or component maker's hardware diagnostics; the part may need repair or replacement",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0x9c--machine-check-exception https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/machine-check-exception/"
  },
  {
   "type": "windows",
   "code": "DRIVER_POWER_STATE_FAILURE (0x0000009F)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "A driver failed while the PC was entering or waking from sleep or changing power state.",
   "severity": "Medium",
   "causes": "Faulty, outdated or incompatible driver; Sleep or hibernation (power state) problems; Recent Windows or driver update",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Find the faulting driver: check Event Viewer and the dump files in C:\\Windows\\Minidump; Update or roll back the driver of the faulting device in Device Manager (look for yellow warning icons); Install the latest Windows updates; Turn off Fast Startup and update chipset and power management drivers; Update the BIOS/UEFI and SSD firmware from the manufacturer",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0x9f--driver-power-state-failure https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/driver-power-state-failure/"
  },
  {
   "type": "windows",
   "code": "ATTEMPTED_WRITE_TO_READONLY_MEMORY (0x000000BE)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "A driver tried to write to read-only memory.",
   "severity": "Medium",
   "causes": "Faulty, outdated or incompatible driver; Conflict with antivirus, VPN or system utility software",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Find the faulting driver: check Event Viewer and the dump files in C:\\Windows\\Minidump; Update or roll back the driver of the faulting device in Device Manager (look for yellow warning icons); Install the latest Windows updates; Uninstall recently installed programs, especially antivirus, VPN or system tools; Test the RAM with Windows Memory Diagnostic (mdsched.exe)",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0xbe--attempted-write-to-readonly-memory https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/attempted-write-to-readonly-memory/"
  },
  {
   "type": "windows",
   "code": "BAD_POOL_CALLER (0x000000C2)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "A driver or program made an invalid memory request.",
   "severity": "Medium",
   "causes": "Faulty, outdated or incompatible driver; Conflict with antivirus, VPN or system utility software",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Find the faulting driver: check Event Viewer and the dump files in C:\\Windows\\Minidump; Update or roll back the driver of the faulting device in Device Manager (look for yellow warning icons); Install the latest Windows updates; Uninstall recently installed programs, especially antivirus, VPN or system tools",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0xc2--bad-pool-caller https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/bad-pool-caller/"
  },
  {
   "type": "windows",
   "code": "DRIVER_VERIFIER_DETECTED_VIOLATION (0x000000C4)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "Driver Verifier caught a driver doing something illegal.",
   "severity": "Medium",
   "causes": "Faulty, outdated or incompatible driver",
   "fixes": "Find the faulting driver: check Event Viewer and the dump files in C:\\Windows\\Minidump; Update or roll back the driver of the faulting device in Device Manager (look for yellow warning icons); When finished testing, turn Driver Verifier off with \"verifier /reset\" and restart; Start Windows in Safe Mode (Advanced startup) and troubleshoot from there",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0xc4--driver-verifier-detected-violation https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/driver-verifier-detected-violation/"
  },
  {
   "type": "windows",
   "code": "DRIVER_CORRUPTED_EXPOOL (0x000000C5)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "A driver corrupted the system memory pool.",
   "severity": "Medium",
   "causes": "Faulty, outdated or incompatible driver; Conflict with antivirus, VPN or system utility software",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Find the faulting driver: check Event Viewer and the dump files in C:\\Windows\\Minidump; Update or roll back the driver of the faulting device in Device Manager (look for yellow warning icons); Install the latest Windows updates; Uninstall recently installed programs, especially antivirus, VPN or system tools",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0xc5--driver-corrupted-expool https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/driver-corrupted-expool/"
  },
  {
   "type": "windows",
   "code": "DRIVER_IRQL_NOT_LESS_OR_EQUAL (0x000000D1)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "A driver tried to access memory at a time it was not allowed to, almost always a faulty driver.",
   "severity": "Medium",
   "causes": "Faulty, outdated or incompatible driver; Conflict with antivirus, VPN or system utility software",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Find the faulting driver: check Event Viewer and the dump files in C:\\Windows\\Minidump; Update or roll back the driver of the faulting device in Device Manager (look for yellow warning icons); Install the latest Windows updates; Uninstall recently installed programs, especially antivirus, VPN or system tools; Test the RAM with Windows Memory Diagnostic (mdsched.exe)",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0xd1--driver-irql-not-less-or-equal https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/driver-irql-not-less-or-equal/"
  },
  {
   "type": "windows",
   "code": "THREAD_STUCK_IN_DEVICE_DRIVER (0x000000EA)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "A device driver got stuck waiting for its hardware, most often the graphics card.",
   "severity": "Medium",
   "causes": "Graphics card driver problem; Overclocking, overheating or unstable power; Hardware fault (processor, motherboard, power supply)",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Clean-install the latest graphics driver from the GPU maker (NVIDIA, AMD or Intel); Reset any overclocking or XMP/EXPO profile to default and check temperatures and cooling; Run the PC or component maker's hardware diagnostics; the part may need repair or replacement",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0xea--thread-stuck-in-device-driver https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/thread-stuck-in-device-driver/"
  },
  {
   "type": "windows",
   "code": "UNMOUNTABLE_BOOT_VOLUME (0x000000ED)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "Windows could not mount the startup drive.",
   "severity": "High",
   "causes": "Failing or corrupted disk or SSD; Corrupted file system or Windows system files; Storage controller setting changed (AHCI/RAID) or missing storage driver",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Check the disk with \"chkdsk C: /f\" and check the drive's health; Make sure the BIOS storage mode (AHCI/RAID/VMD) was not changed and the storage driver is installed; Use System Restore or uninstall the latest Windows update from Advanced startup",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0xed--unmountable-boot-volume https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/unmountable-boot-volume/"
  },
  {
   "type": "windows",
   "code": "CRITICAL_PROCESS_DIED (0x000000EF)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "A process that Windows needs to run stopped unexpectedly.",
   "severity": "High",
   "causes": "Corrupted file system or Windows system files; Faulty, outdated or incompatible driver; Recent Windows or driver update; Failing or corrupted disk or SSD",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Start Windows in Safe Mode (Advanced startup) and troubleshoot from there; Run \"sfc /scannow\" and \"DISM /Online /Cleanup-Image /RestoreHealth\" as administrator; Update or roll back the driver of the faulting device in Device Manager (look for yellow warning icons); Use System Restore or uninstall the latest Windows update from Advanced startup; Check the disk with \"chkdsk C: /f\" and check the drive's health",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0xef--critical-process-died https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/critical-process-died/"
  },
  {
   "type": "windows",
   "code": "CRITICAL_OBJECT_TERMINATION (0x000000F4)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "A process or thread essential to Windows ended unexpectedly.",
   "severity": "High",
   "causes": "Failing or corrupted disk or SSD; Corrupted file system or Windows system files; Malware",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Check the disk with \"chkdsk C: /f\" and check the drive's health; Run \"sfc /scannow\" and \"DISM /Online /Cleanup-Image /RestoreHealth\" as administrator; Run a full malware scan; Update the BIOS/UEFI and SSD firmware from the manufacturer",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0xf4--critical-object-termination https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/critical-object-termination/"
  },
  {
   "type": "windows",
   "code": "BUGCODE_USB_DRIVER (0x000000FE)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "An error occurred in a USB driver.",
   "severity": "Medium",
   "causes": "Faulty USB device or USB driver; Faulty, outdated or incompatible driver",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Disconnect recently added hardware and external devices, then restart; Update or roll back the driver of the faulting device in Device Manager (look for yellow warning icons); Install the latest Windows updates",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0xfe--bugcode-usb-driver https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/bugcode-usb-driver/"
  },
  {
   "type": "windows",
   "code": "CLOCK_WATCHDOG_TIMEOUT (0x00000101)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "A processor core stopped responding (an expected clock interrupt was not received in time).",
   "severity": "High",
   "causes": "Hardware fault (processor, motherboard, power supply); Overclocking, overheating or unstable power; Outdated BIOS/UEFI or SSD firmware",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Reset any overclocking or XMP/EXPO profile to default and check temperatures and cooling; Update the BIOS/UEFI and SSD firmware from the manufacturer; Update or roll back the driver of the faulting device in Device Manager (look for yellow warning icons); Run the PC or component maker's hardware diagnostics; the part may need repair or replacement",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0x101--clock-watchdog-timeout https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/clock-watchdog-timeout/"
  },
  {
   "type": "windows",
   "code": "CRITICAL_STRUCTURE_CORRUPTION (0x00000109)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "Windows detected that critical kernel code or data was corrupted.",
   "severity": "High",
   "causes": "Faulty, outdated or incompatible driver; Faulty or incompatible RAM; Conflict with antivirus, VPN or system utility software",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Uninstall recently installed programs, especially antivirus, VPN or system tools; Test the RAM with Windows Memory Diagnostic (mdsched.exe); Update or roll back the driver of the faulting device in Device Manager (look for yellow warning icons); Run \"sfc /scannow\" and \"DISM /Online /Cleanup-Image /RestoreHealth\" as administrator",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0x109--critical-structure-corruption https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/critical-structure-corruption/"
  },
  {
   "type": "windows",
   "code": "VIDEO_DXGKRNL_FATAL_ERROR (0x00000113)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "The DirectX graphics kernel detected a fatal error.",
   "severity": "Medium",
   "causes": "Graphics card driver problem; Recent Windows or driver update",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Clean-install the latest graphics driver from the GPU maker (NVIDIA, AMD or Intel); Install the latest Windows updates; Use System Restore or uninstall the latest Windows update from Advanced startup",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0x113--video-dxgkrnl-fatal-error https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/video-dxgkrnl-fatal-error/"
  },
  {
   "type": "windows",
   "code": "VIDEO_TDR_FAILURE (0x00000116)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "The graphics driver stopped responding and Windows could not recover it.",
   "severity": "Medium",
   "causes": "Graphics card driver problem; Overclocking, overheating or unstable power; Hardware fault (processor, motherboard, power supply)",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Clean-install the latest graphics driver from the GPU maker (NVIDIA, AMD or Intel); Reset any overclocking or XMP/EXPO profile to default and check temperatures and cooling; Install the latest Windows updates; Run the PC or component maker's hardware diagnostics; the part may need repair or replacement",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0x116--video-tdr-failure https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/video-tdr-failure/"
  },
  {
   "type": "windows",
   "code": "VIDEO_SCHEDULER_INTERNAL_ERROR (0x00000119)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "The graphics scheduler detected a fatal error.",
   "severity": "Medium",
   "causes": "Graphics card driver problem; Recent Windows or driver update",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Clean-install the latest graphics driver from the GPU maker (NVIDIA, AMD or Intel); Install the latest Windows updates; Run \"sfc /scannow\" and \"DISM /Online /Cleanup-Image /RestoreHealth\" as administrator",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0x119--video-scheduler-internal-error https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/video-scheduler-internal-error/"
  },
  {
   "type": "windows",
   "code": "WHEA_UNCORRECTABLE_ERROR (0x00000124)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "A fatal hardware error occurred (Windows Hardware Error Architecture).",
   "severity": "High",
   "causes": "Hardware fault (processor, motherboard, power supply); Overclocking, overheating or unstable power; Outdated BIOS/UEFI or SSD firmware",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Reset any overclocking or XMP/EXPO profile to default and check temperatures and cooling; Update the BIOS/UEFI and SSD firmware from the manufacturer; Test the RAM with Windows Memory Diagnostic (mdsched.exe); Run the PC or component maker's hardware diagnostics; the part may need repair or replacement",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0x124--whea-uncorrectable-error https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/whea-uncorrectable-error/"
  },
  {
   "type": "windows",
   "code": "DPC_WATCHDOG_VIOLATION (0x00000133)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "A driver or device took too long to finish its work, often a storage or SSD driver or firmware.",
   "severity": "Medium",
   "causes": "Faulty, outdated or incompatible driver; Outdated BIOS/UEFI or SSD firmware; Failing or corrupted disk or SSD",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Find the faulting driver: check Event Viewer and the dump files in C:\\Windows\\Minidump; Update or roll back the driver of the faulting device in Device Manager (look for yellow warning icons); Install the latest Windows updates; Update the BIOS/UEFI and SSD firmware from the manufacturer; Check the disk with \"chkdsk C: /f\" and check the drive's health",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0x133--dpc-watchdog-violation https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/dpc-watchdog-violation/"
  },
  {
   "type": "windows",
   "code": "KERNEL_SECURITY_CHECK_FAILURE (0x00000139)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "Windows detected corruption of a critical data structure.",
   "severity": "Medium",
   "causes": "Faulty, outdated or incompatible driver; Faulty or incompatible RAM; Corrupted file system or Windows system files",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Find the faulting driver: check Event Viewer and the dump files in C:\\Windows\\Minidump; Update or roll back the driver of the faulting device in Device Manager (look for yellow warning icons); Install the latest Windows updates; Test the RAM with Windows Memory Diagnostic (mdsched.exe); Run \"sfc /scannow\" and \"DISM /Online /Cleanup-Image /RestoreHealth\" as administrator",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0x139--kernel-security-check-failure https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/kernel-security-check-failure/"
  },
  {
   "type": "windows",
   "code": "KERNEL_MODE_HEAP_CORRUPTION (0x0000013A)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "Windows detected corruption in kernel-mode memory (the heap).",
   "severity": "Medium",
   "causes": "Faulty, outdated or incompatible driver; Conflict with antivirus, VPN or system utility software; Graphics card driver problem",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Find the faulting driver: check Event Viewer and the dump files in C:\\Windows\\Minidump; Update or roll back the driver of the faulting device in Device Manager (look for yellow warning icons); Install the latest Windows updates; Clean-install the latest graphics driver from the GPU maker (NVIDIA, AMD or Intel); Uninstall recently installed programs, especially antivirus, VPN or system tools",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0x13a--kernel-mode-heap-corruption https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/kernel-mode-heap-corruption/"
  },
  {
   "type": "windows",
   "code": "UNEXPECTED_STORE_EXCEPTION (0x00000154)",
   "brand": "Microsoft",
   "device": "Windows",
   "meaning": "The memory store component hit an unexpected error, often linked to the disk or security software.",
   "severity": "Medium",
   "causes": "Failing or corrupted disk or SSD; Conflict with antivirus, VPN or system utility software; Outdated BIOS/UEFI or SSD firmware",
   "fixes": "Restart the PC. If the blue screen happened only once and does not return, no further action is usually needed; Check the disk with \"chkdsk C: /f\" and check the drive's health; Update the BIOS/UEFI and SSD firmware from the manufacturer; Uninstall recently installed programs, especially antivirus, VPN or system tools; Run \"sfc /scannow\" and \"DISM /Online /Cleanup-Image /RestoreHealth\" as administrator; Turn off Fast Startup and update chipset and power management drivers",
   "source": "https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0x154--unexpected-store-exception https://support.microsoft.com/windows/resolving-blue-screen-errors-in-windows-60b01860-58f2-be66-7516-5c45a66ae3c6",
   "url": "https://errora.com.tr/en/windows/unexpected-store-exception/"
  },
  {
   "type": "http",
   "code": "100",
   "brand": "",
   "device": "HTTP Continue",
   "meaning": "The server received the request headers and the client should continue sending the request body.",
   "severity": "Info (not a fault)",
   "causes": "",
   "fixes": "Nothing to do: this is normal",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.2.1 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/100",
   "url": "https://errora.com.tr/en/http/100/"
  },
  {
   "type": "http",
   "code": "101",
   "brand": "",
   "device": "HTTP Switching Protocols",
   "meaning": "The server agrees to switch to the protocol the client asked for (for example, WebSocket).",
   "severity": "Info (not a fault)",
   "causes": "",
   "fixes": "Nothing to do: this is normal",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.2.2 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/101",
   "url": "https://errora.com.tr/en/http/101/"
  },
  {
   "type": "http",
   "code": "103",
   "brand": "",
   "device": "HTTP Early Hints",
   "meaning": "The server sends preliminary headers, such as preload links, before the final response so the browser can start loading resources early.",
   "severity": "Info (not a fault)",
   "causes": "",
   "fixes": "Nothing to do: this is normal",
   "source": "https://www.rfc-editor.org/rfc/rfc8297 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/103",
   "url": "https://errora.com.tr/en/http/103/"
  },
  {
   "type": "http",
   "code": "200",
   "brand": "",
   "device": "HTTP OK",
   "meaning": "The request succeeded.",
   "severity": "Info (not a fault)",
   "causes": "",
   "fixes": "Nothing to do: this is normal",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.3.1 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/200",
   "url": "https://errora.com.tr/en/http/200/"
  },
  {
   "type": "http",
   "code": "201",
   "brand": "",
   "device": "HTTP Created",
   "meaning": "The request succeeded and a new resource was created.",
   "severity": "Info (not a fault)",
   "causes": "",
   "fixes": "Nothing to do: this is normal",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.3.2 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/201",
   "url": "https://errora.com.tr/en/http/201/"
  },
  {
   "type": "http",
   "code": "202",
   "brand": "",
   "device": "HTTP Accepted",
   "meaning": "The request was accepted for processing, but processing has not finished yet.",
   "severity": "Info (not a fault)",
   "causes": "",
   "fixes": "Nothing to do: this is normal",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.3.3 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/202",
   "url": "https://errora.com.tr/en/http/202/"
  },
  {
   "type": "http",
   "code": "204",
   "brand": "",
   "device": "HTTP No Content",
   "meaning": "The request succeeded, but there is no content to send back.",
   "severity": "Info (not a fault)",
   "causes": "",
   "fixes": "Nothing to do: this is normal",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.3.5 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/204",
   "url": "https://errora.com.tr/en/http/204/"
  },
  {
   "type": "http",
   "code": "206",
   "brand": "",
   "device": "HTTP Partial Content",
   "meaning": "The server is sending only part of the file, as requested (used for resumable downloads and video streaming).",
   "severity": "Info (not a fault)",
   "causes": "",
   "fixes": "Nothing to do: this is normal",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.3.7 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/206",
   "url": "https://errora.com.tr/en/http/206/"
  },
  {
   "type": "http",
   "code": "300",
   "brand": "",
   "device": "HTTP Multiple Choices",
   "meaning": "The resource has more than one version and the client can choose one.",
   "severity": "Info (not a fault)",
   "causes": "",
   "fixes": "Nothing to do: this is normal; Use 301/308 for permanent and 302/307 for temporary moves; avoid redirect chains",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.4.1 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/300",
   "url": "https://errora.com.tr/en/http/300/"
  },
  {
   "type": "http",
   "code": "301",
   "brand": "",
   "device": "HTTP Moved Permanently",
   "meaning": "The page has moved permanently to a new URL; browsers and search engines should use the new address.",
   "severity": "Info (not a fault)",
   "causes": "",
   "fixes": "Nothing to do: this is normal; Use 301/308 for permanent and 302/307 for temporary moves; avoid redirect chains",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.4.2 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/301",
   "url": "https://errora.com.tr/en/http/301/"
  },
  {
   "type": "http",
   "code": "302",
   "brand": "",
   "device": "HTTP Found",
   "meaning": "The page is temporarily available at a different URL.",
   "severity": "Info (not a fault)",
   "causes": "",
   "fixes": "Nothing to do: this is normal; Use 301/308 for permanent and 302/307 for temporary moves; avoid redirect chains",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.4.3 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/302",
   "url": "https://errora.com.tr/en/http/302/"
  },
  {
   "type": "http",
   "code": "303",
   "brand": "",
   "device": "HTTP See Other",
   "meaning": "The client should fetch the result from another URL (common after submitting a form).",
   "severity": "Info (not a fault)",
   "causes": "",
   "fixes": "Nothing to do: this is normal; Use 301/308 for permanent and 302/307 for temporary moves; avoid redirect chains",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.4.4 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/303",
   "url": "https://errora.com.tr/en/http/303/"
  },
  {
   "type": "http",
   "code": "304",
   "brand": "",
   "device": "HTTP Not Modified",
   "meaning": "The copy saved in your browser cache is still up to date, so the server does not send the content again.",
   "severity": "Info (not a fault)",
   "causes": "",
   "fixes": "Nothing to do: this is normal; Send correct ETag and Last-Modified headers for caching",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.4.5 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/304",
   "url": "https://errora.com.tr/en/http/304/"
  },
  {
   "type": "http",
   "code": "307",
   "brand": "",
   "device": "HTTP Temporary Redirect",
   "meaning": "The page is temporarily at another URL and the request must be repeated there with the same method.",
   "severity": "Info (not a fault)",
   "causes": "",
   "fixes": "Nothing to do: this is normal; Use 301/308 for permanent and 302/307 for temporary moves; avoid redirect chains",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.4.8 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/307",
   "url": "https://errora.com.tr/en/http/307/"
  },
  {
   "type": "http",
   "code": "308",
   "brand": "",
   "device": "HTTP Permanent Redirect",
   "meaning": "The page has moved permanently and the request must be repeated at the new URL with the same method.",
   "severity": "Info (not a fault)",
   "causes": "",
   "fixes": "Nothing to do: this is normal; Use 301/308 for permanent and 302/307 for temporary moves; avoid redirect chains",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.4.9 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/308",
   "url": "https://errora.com.tr/en/http/308/"
  },
  {
   "type": "http",
   "code": "400",
   "brand": "",
   "device": "HTTP Bad Request",
   "meaning": "The server cannot process the request because it is malformed or invalid.",
   "severity": "Medium",
   "causes": "Malformed request, invalid parameters or corrupted cookies; Cookies or headers too large; Mistyped address or broken link",
   "fixes": "Check the address for typos; Clear the browser's cache and cookies for this site; Reload the page; Validate input and return a clear error message; Check the server error logs at the time of the error",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.5.1 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/400",
   "url": "https://errora.com.tr/en/http/400/"
  },
  {
   "type": "http",
   "code": "401",
   "brand": "",
   "device": "HTTP Unauthorized",
   "meaning": "You need to log in: authentication is required and was missing or invalid.",
   "severity": "Medium",
   "causes": "Missing, expired or wrong login credentials",
   "fixes": "Log in again or check your username and password; Clear the browser's cache and cookies for this site; Return a WWW-Authenticate header and check how users log in; Check the server error logs at the time of the error",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.5.2 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/401",
   "url": "https://errora.com.tr/en/http/401/"
  },
  {
   "type": "http",
   "code": "403",
   "brand": "",
   "device": "HTTP Forbidden",
   "meaning": "The server understood the request but refuses to give access.",
   "severity": "Medium",
   "causes": "No permission, or access blocked by server rules (IP, country, firewall); Missing, expired or wrong login credentials; Server misconfiguration (.htaccess, server or proxy rules)",
   "fixes": "Log in again or check your username and password; Clear the browser's cache and cookies for this site; Check your connection, or try without a VPN or proxy; Contact the website if the problem continues; Check file permissions, .htaccess and firewall/WAF rules; Review recent configuration changes (.htaccess, nginx/Apache rules); Check the server error logs at the time of the error",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.5.4 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/403",
   "url": "https://errora.com.tr/en/http/403/"
  },
  {
   "type": "http",
   "code": "404",
   "brand": "",
   "device": "HTTP Not Found",
   "meaning": "The server cannot find the requested page or file.",
   "severity": "Medium",
   "causes": "Mistyped address or broken link; Page deleted or moved without a redirect",
   "fixes": "Check the address for typos; Go to the site's home page or use its search; Reload the page; Redirect the old URL to the new one with a 301; Fix internal links that point to the wrong URL; If the page was removed on purpose, return 410 so search engines drop it faster",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.5.5 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/404",
   "url": "https://errora.com.tr/en/http/404/"
  },
  {
   "type": "http",
   "code": "405",
   "brand": "",
   "device": "HTTP Method Not Allowed",
   "meaning": "The request method (for example POST) is not allowed for this URL.",
   "severity": "Medium",
   "causes": "Request method not supported for this URL; Server misconfiguration (.htaccess, server or proxy rules)",
   "fixes": "Go to the site's home page or use its search; Contact the website if the problem continues; Allow the method on this route or send an Allow header; Review recent configuration changes (.htaccess, nginx/Apache rules)",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.5.6 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/405",
   "url": "https://errora.com.tr/en/http/405/"
  },
  {
   "type": "http",
   "code": "406",
   "brand": "",
   "device": "HTTP Not Acceptable",
   "meaning": "The server cannot return the content in a format the client said it accepts.",
   "severity": "Medium",
   "causes": "Format or content type the server cannot handle",
   "fixes": "Update your browser or app; Contact the website if the problem continues; Review recent configuration changes (.htaccess, nginx/Apache rules); Validate input and return a clear error message",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.5.7 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/406",
   "url": "https://errora.com.tr/en/http/406/"
  },
  {
   "type": "http",
   "code": "407",
   "brand": "",
   "device": "HTTP Proxy Authentication Required",
   "meaning": "You must first sign in to the proxy server between you and the website.",
   "severity": "Medium",
   "causes": "Missing, expired or wrong login credentials",
   "fixes": "Log in again or check your username and password; Check your connection, or try without a VPN or proxy; Return a WWW-Authenticate header and check how users log in",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.5.8 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/407",
   "url": "https://errora.com.tr/en/http/407/"
  },
  {
   "type": "http",
   "code": "408",
   "brand": "",
   "device": "HTTP Request Timeout",
   "meaning": "The server waited too long for the client to finish sending the request.",
   "severity": "Medium",
   "causes": "Slow or interrupted internet connection; Server overloaded, out of resources or under maintenance",
   "fixes": "Reload the page; Check your connection, or try without a VPN or proxy; Speed up slow requests, run long jobs in the background or raise proxy timeouts; Add server resources or caching and check for traffic spikes",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.5.9 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/408",
   "url": "https://errora.com.tr/en/http/408/"
  },
  {
   "type": "http",
   "code": "409",
   "brand": "",
   "device": "HTTP Conflict",
   "meaning": "The request conflicts with the current state of the resource.",
   "severity": "Medium",
   "causes": "Request conflicts with the current state (e.g. simultaneous edit or duplicate)",
   "fixes": "Reload the page; Validate input and return a clear error message",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.5.10 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/409",
   "url": "https://errora.com.tr/en/http/409/"
  },
  {
   "type": "http",
   "code": "410",
   "brand": "",
   "device": "HTTP Gone",
   "meaning": "The page was removed permanently and will not come back.",
   "severity": "Medium",
   "causes": "Page deleted or moved without a redirect",
   "fixes": "Go to the site's home page or use its search; Redirect the old URL to the new one with a 301; Fix internal links that point to the wrong URL",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.5.11 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/410",
   "url": "https://errora.com.tr/en/http/410/"
  },
  {
   "type": "http",
   "code": "411",
   "brand": "",
   "device": "HTTP Length Required",
   "meaning": "The server requires the request to state its length (Content-Length header).",
   "severity": "Medium",
   "causes": "Malformed request, invalid parameters or corrupted cookies",
   "fixes": "Update your browser or app; Validate input and return a clear error message",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.5.12 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/411",
   "url": "https://errora.com.tr/en/http/411/"
  },
  {
   "type": "http",
   "code": "412",
   "brand": "",
   "device": "HTTP Precondition Failed",
   "meaning": "A condition in the request headers was not met by the current version of the resource.",
   "severity": "Medium",
   "causes": "Conditional request headers do not match the current version",
   "fixes": "Reload the page; Send correct ETag and Last-Modified headers for caching; Validate input and return a clear error message",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.5.13 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/412",
   "url": "https://errora.com.tr/en/http/412/"
  },
  {
   "type": "http",
   "code": "413",
   "brand": "",
   "device": "HTTP Content Too Large",
   "meaning": "The uploaded file or data is larger than the server allows.",
   "severity": "Medium",
   "causes": "File or data larger than the server's limit",
   "fixes": "Upload a smaller file or less data; Raise upload/body limits (e.g. upload_max_filesize, client_max_body_size)",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.5.14 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/413",
   "url": "https://errora.com.tr/en/http/413/"
  },
  {
   "type": "http",
   "code": "414",
   "brand": "",
   "device": "HTTP URI Too Long",
   "meaning": "The URL is longer than the server is willing to process.",
   "severity": "Medium",
   "causes": "Mistyped address or broken link; Redirect or reference loop in the server configuration",
   "fixes": "Go to the site's home page or use its search; Check the address for typos; Use 301/308 for permanent and 302/307 for temporary moves; avoid redirect chains; Review recent configuration changes (.htaccess, nginx/Apache rules)",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.5.15 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/414",
   "url": "https://errora.com.tr/en/http/414/"
  },
  {
   "type": "http",
   "code": "415",
   "brand": "",
   "device": "HTTP Unsupported Media Type",
   "meaning": "The server does not accept the format of the data that was sent.",
   "severity": "Medium",
   "causes": "Format or content type the server cannot handle",
   "fixes": "Update your browser or app; Contact the website if the problem continues; Validate input and return a clear error message",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.5.16 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/415",
   "url": "https://errora.com.tr/en/http/415/"
  },
  {
   "type": "http",
   "code": "416",
   "brand": "",
   "device": "HTTP Range Not Satisfiable",
   "meaning": "The requested part of the file lies outside the file's size.",
   "severity": "Medium",
   "causes": "Requested part is beyond the end of the file",
   "fixes": "Reload the page; Clear the browser's cache and cookies for this site; Send correct ETag and Last-Modified headers for caching",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.5.17 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/416",
   "url": "https://errora.com.tr/en/http/416/"
  },
  {
   "type": "http",
   "code": "417",
   "brand": "",
   "device": "HTTP Expectation Failed",
   "meaning": "The server cannot meet the requirement in the request's Expect header.",
   "severity": "Medium",
   "causes": "Malformed request, invalid parameters or corrupted cookies",
   "fixes": "Update your browser or app; Review recent configuration changes (.htaccess, nginx/Apache rules)",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.5.18 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/417",
   "url": "https://errora.com.tr/en/http/417/"
  },
  {
   "type": "http",
   "code": "418",
   "brand": "",
   "device": "HTTP I'm a teapot (Unused)",
   "meaning": "An April Fools' joke from RFC 2324 (\"I'm a teapot\"). The code is reserved and not used in real HTTP.",
   "severity": "Medium",
   "causes": "This is a normal part of how HTTP works",
   "fixes": "Nothing to do: this is normal",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.5.19 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/418",
   "url": "https://errora.com.tr/en/http/418/"
  },
  {
   "type": "http",
   "code": "421",
   "brand": "",
   "device": "HTTP Misdirected Request",
   "meaning": "The request reached a server that cannot answer for this website address.",
   "severity": "Medium",
   "causes": "Server misconfiguration (.htaccess, server or proxy rules); DNS records pointing to the wrong server",
   "fixes": "Reload the page; Check your connection, or try without a VPN or proxy; Review recent configuration changes (.htaccess, nginx/Apache rules); Check that DNS A/AAAA records point to the correct server IP",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.5.20 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/421",
   "url": "https://errora.com.tr/en/http/421/"
  },
  {
   "type": "http",
   "code": "422",
   "brand": "",
   "device": "HTTP Unprocessable Content",
   "meaning": "The request is well-formed, but the data in it is invalid (for example, it failed validation).",
   "severity": "Medium",
   "causes": "Data in the request failed validation",
   "fixes": "Check the information you entered and try again; Validate input and return a clear error message",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.5.21 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/422",
   "url": "https://errora.com.tr/en/http/422/"
  },
  {
   "type": "http",
   "code": "423",
   "brand": "",
   "device": "HTTP Locked",
   "meaning": "The resource is locked and cannot be changed right now.",
   "severity": "Medium",
   "causes": "Request conflicts with the current state (e.g. simultaneous edit or duplicate)",
   "fixes": "Wait a few minutes before trying again; Review recent configuration changes (.htaccess, nginx/Apache rules)",
   "source": "https://www.rfc-editor.org/rfc/rfc4918 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/423",
   "url": "https://errora.com.tr/en/http/423/"
  },
  {
   "type": "http",
   "code": "425",
   "brand": "",
   "device": "HTTP Too Early",
   "meaning": "The server refuses to process a request that could be replayed (sent too early during the connection).",
   "severity": "Medium",
   "causes": "Client and server do not support the same protocol or version",
   "fixes": "Reload the page; Review recent configuration changes (.htaccess, nginx/Apache rules)",
   "source": "https://www.rfc-editor.org/rfc/rfc8470 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/425",
   "url": "https://errora.com.tr/en/http/425/"
  },
  {
   "type": "http",
   "code": "426",
   "brand": "",
   "device": "HTTP Upgrade Required",
   "meaning": "The client must switch to a different or newer protocol to continue.",
   "severity": "Medium",
   "causes": "Client and server do not support the same protocol or version",
   "fixes": "Update your browser or app; Review recent configuration changes (.htaccess, nginx/Apache rules)",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.5.22 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/426",
   "url": "https://errora.com.tr/en/http/426/"
  },
  {
   "type": "http",
   "code": "428",
   "brand": "",
   "device": "HTTP Precondition Required",
   "meaning": "The server requires the request to be conditional, to prevent overwriting someone else's changes.",
   "severity": "Medium",
   "causes": "Conditional request headers do not match the current version",
   "fixes": "Reload the page; Validate input and return a clear error message",
   "source": "https://www.rfc-editor.org/rfc/rfc6585 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/428",
   "url": "https://errora.com.tr/en/http/428/"
  },
  {
   "type": "http",
   "code": "429",
   "brand": "",
   "device": "HTTP Too Many Requests",
   "meaning": "Too many requests were sent in a short time (rate limiting).",
   "severity": "Medium",
   "causes": "Too many requests in a short time",
   "fixes": "Wait a few minutes before trying again; Check your connection, or try without a VPN or proxy; Tune rate limits and send a Retry-After header; Add server resources or caching and check for traffic spikes",
   "source": "https://www.rfc-editor.org/rfc/rfc6585 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/429",
   "url": "https://errora.com.tr/en/http/429/"
  },
  {
   "type": "http",
   "code": "431",
   "brand": "",
   "device": "HTTP Request Header Fields Too Large",
   "meaning": "The request headers, often the cookies, are too large.",
   "severity": "Medium",
   "causes": "Cookies or headers too large",
   "fixes": "Clear the browser's cache and cookies for this site; Reduce cookie size or raise header size limits",
   "source": "https://www.rfc-editor.org/rfc/rfc6585 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/431",
   "url": "https://errora.com.tr/en/http/431/"
  },
  {
   "type": "http",
   "code": "451",
   "brand": "",
   "device": "HTTP Unavailable For Legal Reasons",
   "meaning": "Access is blocked for legal reasons, such as a court order or government demand.",
   "severity": "Medium",
   "causes": "Blocked by court order or government demand",
   "fixes": "Contact the website if the problem continues",
   "source": "https://www.rfc-editor.org/rfc/rfc7725 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/451",
   "url": "https://errora.com.tr/en/http/451/"
  },
  {
   "type": "http",
   "code": "500",
   "brand": "",
   "device": "HTTP Internal Server Error",
   "meaning": "The server hit an unexpected error and could not complete the request.",
   "severity": "High",
   "causes": "Error in the website's code, a plugin or a recent update; Server misconfiguration (.htaccess, server or proxy rules); Server overloaded, out of resources or under maintenance",
   "fixes": "Reload the page; Clear the browser's cache and cookies for this site; Wait a few minutes before trying again; Contact the website if the problem continues; Check the server error logs at the time of the error; Fix the code error: roll back the last change or disable plugins one by one; Review recent configuration changes (.htaccess, nginx/Apache rules); Add server resources or caching and check for traffic spikes",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.6.1 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/500",
   "url": "https://errora.com.tr/en/http/500/"
  },
  {
   "type": "http",
   "code": "501",
   "brand": "",
   "device": "HTTP Not Implemented",
   "meaning": "The server does not support the function needed to complete the request.",
   "severity": "High",
   "causes": "Request method not supported for this URL; Client and server do not support the same protocol or version",
   "fixes": "Update your browser or app; Contact the website if the problem continues; Allow the method on this route or send an Allow header; Review recent configuration changes (.htaccess, nginx/Apache rules)",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.6.2 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/501",
   "url": "https://errora.com.tr/en/http/501/"
  },
  {
   "type": "http",
   "code": "502",
   "brand": "",
   "device": "HTTP Bad Gateway",
   "meaning": "A gateway or proxy server received an invalid response from the server behind it.",
   "severity": "High",
   "causes": "Backend server crashed or sent an invalid response; Server overloaded, out of resources or under maintenance; Firewall or security plugin blocking the proxy/CDN's IP addresses; Server misconfiguration (.htaccess, server or proxy rules)",
   "fixes": "Reload the page; Wait a few minutes before trying again; Clear the browser's cache and cookies for this site; Make sure the backend (e.g. PHP-FPM or app server) is running and responding; Check the server error logs at the time of the error; Add server resources or caching and check for traffic spikes; Review recent configuration changes (.htaccess, nginx/Apache rules)",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.6.3 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/502",
   "url": "https://errora.com.tr/en/http/502/"
  },
  {
   "type": "http",
   "code": "503",
   "brand": "",
   "device": "HTTP Service Unavailable",
   "meaning": "The server is temporarily unable to handle the request because it is overloaded or under maintenance.",
   "severity": "High",
   "causes": "Server overloaded, out of resources or under maintenance; Backend server crashed or sent an invalid response",
   "fixes": "Wait a few minutes before trying again; Reload the page; Add server resources or caching and check for traffic spikes; For planned maintenance, return 503 with a Retry-After header; Check the server error logs at the time of the error",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.6.4 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/503",
   "url": "https://errora.com.tr/en/http/503/"
  },
  {
   "type": "http",
   "code": "504",
   "brand": "",
   "device": "HTTP Gateway Timeout",
   "meaning": "A gateway or proxy server did not get a response in time from the server behind it.",
   "severity": "High",
   "causes": "Backend server or a slow task took too long to respond; Server overloaded, out of resources or under maintenance; DNS records pointing to the wrong server",
   "fixes": "Wait a few minutes before trying again; Reload the page; Check your connection, or try without a VPN or proxy; Speed up slow requests, run long jobs in the background or raise proxy timeouts; Make sure the backend (e.g. PHP-FPM or app server) is running and responding; Check that DNS A/AAAA records point to the correct server IP",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.6.5 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/504",
   "url": "https://errora.com.tr/en/http/504/"
  },
  {
   "type": "http",
   "code": "505",
   "brand": "",
   "device": "HTTP HTTP Version Not Supported",
   "meaning": "The server does not support the HTTP version used in the request.",
   "severity": "High",
   "causes": "Client and server do not support the same protocol or version",
   "fixes": "Update your browser or app; Review recent configuration changes (.htaccess, nginx/Apache rules)",
   "source": "https://www.rfc-editor.org/rfc/rfc9110#section-15.6.6 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/505",
   "url": "https://errora.com.tr/en/http/505/"
  },
  {
   "type": "http",
   "code": "507",
   "brand": "",
   "device": "HTTP Insufficient Storage",
   "meaning": "The server does not have enough storage space to complete the request.",
   "severity": "High",
   "causes": "Server out of disk space",
   "fixes": "Wait a few minutes before trying again; Contact the website if the problem continues; Free up disk space or increase storage",
   "source": "https://www.rfc-editor.org/rfc/rfc4918 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/507",
   "url": "https://errora.com.tr/en/http/507/"
  },
  {
   "type": "http",
   "code": "508",
   "brand": "",
   "device": "HTTP Loop Detected",
   "meaning": "The server detected an infinite loop while processing the request.",
   "severity": "High",
   "causes": "Redirect or reference loop in the server configuration; Server misconfiguration (.htaccess, server or proxy rules)",
   "fixes": "Contact the website if the problem continues; Review recent configuration changes (.htaccess, nginx/Apache rules)",
   "source": "https://www.rfc-editor.org/rfc/rfc5842 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/508",
   "url": "https://errora.com.tr/en/http/508/"
  },
  {
   "type": "http",
   "code": "511",
   "brand": "",
   "device": "HTTP Network Authentication Required",
   "meaning": "You must sign in to the network (for example hotel, airport or public Wi-Fi) before you can use the internet.",
   "severity": "High",
   "causes": "Network requires sign-in (hotel, airport or public Wi-Fi)",
   "fixes": "Open any website to bring up the network's sign-in page",
   "source": "https://www.rfc-editor.org/rfc/rfc6585 https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/511",
   "url": "https://errora.com.tr/en/http/511/"
  },
  {
   "type": "http",
   "code": "520",
   "brand": "",
   "device": "HTTP Web Server Returned an Unknown Error",
   "meaning": "The website's server returned an empty, unknown or unexpected response to Cloudflare.",
   "severity": "High",
   "causes": "Error in the website's code, a plugin or a recent update; Firewall or security plugin blocking the proxy/CDN's IP addresses; Cookies or headers too large; Server misconfiguration (.htaccess, server or proxy rules)",
   "fixes": "Reload the page; Wait a few minutes before trying again; Contact the website if the problem continues; Check the server error logs at the time of the error; Allow Cloudflare's IP ranges in the server firewall and security plugins; Reduce cookie size or raise header size limits; Ask your hosting provider to check the server",
   "source": "https://developers.cloudflare.com/support/troubleshooting/http-status-codes/cloudflare-5xx-errors/error-520/",
   "url": "https://errora.com.tr/en/http/520/"
  },
  {
   "type": "http",
   "code": "521",
   "brand": "",
   "device": "HTTP Web Server Is Down",
   "meaning": "The website's server refused the connection from Cloudflare (the web server is down or blocking Cloudflare).",
   "severity": "High",
   "causes": "Web server offline or refusing connections; Firewall or security plugin blocking the proxy/CDN's IP addresses",
   "fixes": "Wait a few minutes before trying again; Contact the website if the problem continues; Allow Cloudflare's IP ranges in the server firewall and security plugins; Make sure the backend (e.g. PHP-FPM or app server) is running and responding; Check the SSL/TLS mode: Full (strict) requires a valid, trusted certificate; Ask your hosting provider to check the server",
   "source": "https://developers.cloudflare.com/support/troubleshooting/http-status-codes/cloudflare-5xx-errors/error-521/",
   "url": "https://errora.com.tr/en/http/521/"
  },
  {
   "type": "http",
   "code": "522",
   "brand": "",
   "device": "HTTP Connection Timed Out",
   "meaning": "Cloudflare timed out while trying to connect to the website's server.",
   "severity": "High",
   "causes": "Firewall or security plugin blocking the proxy/CDN's IP addresses; Server overloaded, out of resources or under maintenance; DNS records pointing to the wrong server",
   "fixes": "Wait a few minutes before trying again; Contact the website if the problem continues; Allow Cloudflare's IP ranges in the server firewall and security plugins; Add server resources or caching and check for traffic spikes; Check that DNS A/AAAA records point to the correct server IP; Ask your hosting provider to check the server",
   "source": "https://developers.cloudflare.com/support/troubleshooting/http-status-codes/cloudflare-5xx-errors/error-522/",
   "url": "https://errora.com.tr/en/http/522/"
  },
  {
   "type": "http",
   "code": "523",
   "brand": "",
   "device": "HTTP Origin Is Unreachable",
   "meaning": "Cloudflare cannot reach the website's server (the origin is unreachable).",
   "severity": "High",
   "causes": "Network routing problem between the CDN and the server; DNS records pointing to the wrong server",
   "fixes": "Wait a few minutes before trying again; Contact the website if the problem continues; Check that DNS A/AAAA records point to the correct server IP; Ask your hosting provider to check the server",
   "source": "https://developers.cloudflare.com/support/troubleshooting/http-status-codes/cloudflare-5xx-errors/error-523/",
   "url": "https://errora.com.tr/en/http/523/"
  },
  {
   "type": "http",
   "code": "524",
   "brand": "",
   "device": "HTTP A Timeout Occurred",
   "meaning": "Cloudflare connected to the website's server, but it did not respond before the timeout (125 seconds by default).",
   "severity": "High",
   "causes": "Backend server or a slow task took too long to respond; Server overloaded, out of resources or under maintenance",
   "fixes": "Wait a few minutes before trying again; Reload the page; Speed up slow requests, run long jobs in the background or raise proxy timeouts; Add server resources or caching and check for traffic spikes; Ask your hosting provider to check the server",
   "source": "https://developers.cloudflare.com/support/troubleshooting/http-status-codes/cloudflare-5xx-errors/error-524/",
   "url": "https://errora.com.tr/en/http/524/"
  },
  {
   "type": "http",
   "code": "525",
   "brand": "",
   "device": "HTTP SSL Handshake Failed",
   "meaning": "The SSL/TLS handshake between Cloudflare and the website's server failed.",
   "severity": "High",
   "causes": "No valid SSL certificate, port 443 closed or cipher mismatch on the server",
   "fixes": "Wait a few minutes before trying again; Contact the website if the problem continues; Install a valid certificate on the server (e.g. Cloudflare Origin CA) and open port 443; Check the SSL/TLS mode: Full (strict) requires a valid, trusted certificate; Ask your hosting provider to check the server",
   "source": "https://developers.cloudflare.com/support/troubleshooting/http-status-codes/cloudflare-5xx-errors/error-525/",
   "url": "https://errora.com.tr/en/http/525/"
  },
  {
   "type": "http",
   "code": "526",
   "brand": "",
   "device": "HTTP Invalid SSL Certificate",
   "meaning": "Cloudflare cannot validate the SSL certificate on the website's server.",
   "severity": "High",
   "causes": "Expired, self-signed or wrong-hostname SSL certificate",
   "fixes": "Wait a few minutes before trying again; Contact the website if the problem continues; Install a valid certificate on the server (e.g. Cloudflare Origin CA) and open port 443; Check the SSL/TLS mode: Full (strict) requires a valid, trusted certificate",
   "source": "https://developers.cloudflare.com/support/troubleshooting/http-status-codes/cloudflare-5xx-errors/error-526/",
   "url": "https://errora.com.tr/en/http/526/"
  }
 ]
}